hh3cPOEPowerObjects
HH3C-POWER-ETH-EXT-MIB ·
.1.3.6.1.4.1.25506.2.14.8
Object
node
No description available.
Context
- MIB
- HH3C-POWER-ETH-EXT-MIB
- OID
.1.3.6.1.4.1.25506.2.14.8- Type
- node
- Parent
- hh3cPowerEthernetExt
- Siblings
- 11
- Children
- 7
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hh3cPsePortTable The indexing scheme is taken form that used by
the IETF Power MIB. The same indexing scheme is
used to give continuity in behaviour between
that standard and this extensions defi… | table | - | .1.3.6.1.4.1.25506.2.14.1 |
| hh3cPDPolicyMode The PD policy only applies to the situation that when a new
PD is inserted, and the power of PSE is overload.
A value of priority(2) means that the power will stop supplying
to th… | scalar | Enumeration | .1.3.6.1.4.1.25506.2.14.10 |
| hh3cPseNotification | node | - | .1.3.6.1.4.1.25506.2.14.11 |
| hh3cPOEPortName PoE-capable interface name. | scalar | OctetString | .1.3.6.1.4.1.25506.2.14.12 |
| hh3cMainPseTable Description. | table | - | .1.3.6.1.4.1.25506.2.14.2 |
| hh3cPseAutoDetectActive The object specifies whether the device auto-detection feature is
active. If this object is set to Active, and a known powered device
is detected, then the port will automaticall… | scalar | Enumeration | .1.3.6.1.4.1.25506.2.14.3 |
| hh3cPseComformance | node | - | .1.3.6.1.4.1.25506.2.14.4 |
| hh3cPsePowerMaxValue The object specifies the max poe power for lanswitch.
The value should between the power currently and the max power. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.25506.2.14.5 |
| hh3cpseportNotification | node | - | .1.3.6.1.4.1.25506.2.14.6 |
| hh3cPseProfilesTable A table of objects representing a set of power profiles.
Power profiles can be applied to PoE ports, which have the
effect of automatically setting the priority, power limit
and P… | table | - | .1.3.6.1.4.1.25506.2.14.7 |
| hh3cPsePolicyMode The PSE policy only applies to the situation that when a new
board (PSE) is inserted, and the power is overload.
A value of priority(2) means that the power will stop supplying
to… | scalar | Enumeration | .1.3.6.1.4.1.25506.2.14.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hh3cPOEThresholdLimitObjs | node | - | .1.3.6.1.4.1.25506.2.14.8.1 |
| hh3cPOESupModuleInfoObjs | node | - | .1.3.6.1.4.1.25506.2.14.8.2 |
| hh3cPOEDCOutStateObjects | node | - | .1.3.6.1.4.1.25506.2.14.8.3 |
| hh3cPOEDCOutInfoObjects | node | - | .1.3.6.1.4.1.25506.2.14.8.4 |
| hh3cPOEACSwitchStateModuleObjs | node | - | .1.3.6.1.4.1.25506.2.14.8.5 |
| hh3cPOEInCurStateObjects | node | - | .1.3.6.1.4.1.25506.2.14.8.6 |
| hh3cPOEAlarmStateObjects | node | - | .1.3.6.1.4.1.25506.2.14.8.7 |