hh3cposClearFCMCounter
HH3C-POS-MIB ·
.1.3.6.1.4.1.25506.8.36.8.12
Object
scalar
r/w
Enumeration
To clear all counters of all FCM interfaces.
Context
- MIB
- HH3C-POS-MIB
- OID
.1.3.6.1.4.1.25506.8.36.8.12- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- hh3cpos
- Siblings
- 22
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | clear |
2 | counting |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hh3cposAppTable The table to get and set the application informatin. | table | - | .1.3.6.1.4.1.25506.8.36.8.1 |
| hh3cposPosDebugAll To open or close the debugging switch of all POS-Interfaces. | scalar | Enumeration | .1.3.6.1.4.1.25506.8.36.8.10 |
| hh3cposClearPacCounter To reset all packet counters of all applicaions and POS-Interfaces. | scalar | Enumeration | .1.3.6.1.4.1.25506.8.36.8.11 |
| hh3cposClearFCMCounter To clear all counters of all FCM interfaces. | scalar | Enumeration | .1.3.6.1.4.1.25506.8.36.8.12 |
| hh3cposEnableTrap To enable or disable trap switch. | scalar | Enumeration | .1.3.6.1.4.1.25506.8.36.8.13 |
| hh3cposFCMAnswerTime FCM answer time, unit:ms. | scalar | Integer32 | .1.3.6.1.4.1.25506.8.36.8.14 |
| hh3cposFCMTradeTime FCM trade time, unit:ms. | scalar | Integer32 | .1.3.6.1.4.1.25506.8.36.8.15 |
| hh3cposFCMPacketInterval FCM packet interval time, unit:ms. | scalar | Integer32 | .1.3.6.1.4.1.25506.8.36.8.16 |
| hh3cposTrap | node | - | .1.3.6.1.4.1.25506.8.36.8.17 |
| hh3cposPadWaitTime The time that POS-Interface needs to wait to receive another packet, unit:ms.
It may be configured when router is used as POSPAD device. In other cases,
It is useless. | scalar | Integer32 | .1.3.6.1.4.1.25506.8.36.8.18 |
| hh3cposPadIdleTimeout If these is no packet transmitting through the time,
the connection of POSPAD device and router whose connect mode
is pad-server will be cut off. Unit:s. | scalar | Integer32 | .1.3.6.1.4.1.25506.8.36.8.19 |
| hh3cposInterTable The table to get and set the POS-Interface informatin. | table | - | .1.3.6.1.4.1.25506.8.36.8.2 |
| hh3cposPadPacType The type of packet.Between POSPAD device and router whose connect mode
is pad-server, there are two types of packet. One is synchronous,
the other is asynchronous. | scalar | Enumeration | .1.3.6.1.4.1.25506.8.36.8.20 |
| hh3cposPadCheckSChar To enable or disable the checking of 10 04 characters in packet.
It is used for the router which is used as POSPAD device.
When the value is disable, it will check pack… | scalar | Enumeration | .1.3.6.1.4.1.25506.8.36.8.21 |
| hh3cposPadTable The table to enable or disable POSPAD-Access function under serial interface. | table | - | .1.3.6.1.4.1.25506.8.36.8.22 |
| hh3cposMapTable The table to get and set the informatin of mapping relation of destination and application. | table | - | .1.3.6.1.4.1.25506.8.36.8.3 |
| hh3cposAsyAppTable The table to get and set the asynchronous-application interface information. | table | - | .1.3.6.1.4.1.25506.8.36.8.4 |
| hh3cposFCMTable The table to get the information of FCM interface. | table | - | .1.3.6.1.4.1.25506.8.36.8.5 |
| hh3cposAppSum The total of configued applications. | scalar | Integer32 | .1.3.6.1.4.1.25506.8.36.8.6 |
| hh3cposInterSum The total of configued POS-Interfaces. | scalar | Integer32 | .1.3.6.1.4.1.25506.8.36.8.7 |
| hh3cposEnable To enable or diable pos-server. | scalar | Enumeration | .1.3.6.1.4.1.25506.8.36.8.8 |
| hh3cposAppDebugAll To open or close the debugging switch of all applications. | scalar | Enumeration | .1.3.6.1.4.1.25506.8.36.8.9 |