hh3cSecureNeedToKnowMode
HH3C-PORT-SECURITY-MIB ·
.1.3.6.1.4.1.25506.2.26.1.2.1.1.2
Object
column
r/w
Enumeration
Attribute to determine which frames are to be forwarded to
this port intact.
1 - Need To Know is not available.
2 - All frames.
3 - Frames addressed to the authorized devices only.
4 - Frames addressed to the authorized devices, plus all broadcast
frames.
5 - Frames addressed to the authorized devices, plus all broadcast
and multicast frames.
6 - As 3 and cannot be changed.
7 - As 4 and cannot be changed.
8 - As 5 and cannot be changed.
9 - Similar to needToKnowWithMulticastsAllowed, but no frames are allowed
when the port has no online users.
If this object returns 1,6,7 or 8, it means that the Need To Know
configuration cannot be changed, and any attempt to write to this object
will cause an error.
Context
- MIB
- HH3C-PORT-SECURITY-MIB
- OID
.1.3.6.1.4.1.25506.2.26.1.2.1.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hh3cSecurePortEntry
- Table
- hh3cSecurePortTable
- Siblings
- 5
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | notAvailable |
2 | disabled |
3 | needToKnowOnly |
4 | needToKnowWithBroadcastsAllowed |
5 | needToKnowWithMulticastsAllowed |
6 | permanentNeedToKnowOnly |
7 | permanentNeedToKnowWithBroadcastsAllowed |
8 | permanentNeedToKnowWithMulticastsAllowed |
9 | needToKnowAuto |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hh3cSecurePortMode Determines the learning and security modes of the port.
See hh3cSecureNeedToKnowMode and hh3cSecureIntrusionAction to
configure Need To Know and Intrusion Action on each port.
(Wh… | column | Enumeration | .1.3.6.1.4.1.25506.2.26.1.2.1.1.1 |
| hh3cSecureIntrusionAction Attribute to determine the action if an unauthorised device
transmits on this port. | column | Enumeration | .1.3.6.1.4.1.25506.2.26.1.2.1.1.3 |
| hh3cSecureNumberAddresses The maximum number of addresses that the port can learn or
store. Reducing this number may cause some addresses to be deleted.
This value is set by the user and cannot be automati… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.25506.2.26.1.2.1.1.4 |
| hh3cSecureNumberAddressesStored The number of addresses that are currently in the
AddressTable for this port. If this object has the same value as
hh3cSecureNumberAddresses, then no more addresses can be author… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.25506.2.26.1.2.1.1.5 |
| hh3cSecureMaximumAddresses This indicates the maximum value that hh3cSecureNumberAddresses
can be set to. It is dependent on the resources available so may change,
eg. if resources are shared between ports… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.25506.2.26.1.2.1.1.6 |