hh3cNqaResultsMaxDelaySD
HH3C-NQA-MIB ·
.1.3.6.1.4.1.25506.8.3.1.3.1.8
Object
The maximal delay from source device to destination device. Currently this value is only used for jitter test, and this value must be 0 in other type test. In jitter test, if destination system time is not valid, the SD delay may be set 0.
Context
- MIB
- HH3C-NQA-MIB
- OID
.1.3.6.1.4.1.25506.8.3.1.3.1.8- Type
- column
- Access
- readonly
- Status
- current
- Units
- milliseconds
- Parent
- hh3cNqaResultsEntry
- Table
- hh3cNqaResultsTable
- Siblings
- 19
Syntax
milliseconds SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hh3cNqaResultsRttNumDisconnects The number of times that a NQA probe failed because
the destination became disconnected.
For connectionless protocol pingCtlTypes, this number should be
zero. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.25506.8.3.1.3.1.1 |
| hh3cNqaResultsLostPacketRatio The value of this object reflects the drop rate of NQA test.
For example, this value is 30 that means source device only
had received 70% packets of total sent packets. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.25506.8.3.1.3.1.10 |
| hh3cNqaResultsPacketLateArrival The value of this object indicates the number of the packets that
arrived after the timeout. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.25506.8.3.1.3.1.11 |
| hh3cNqaResultsRttSum The sum of round trip time. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.25506.8.3.1.3.1.12 |
| hh3cNqaResultsNumOfDelaySD The number of delay from source to destination that are
successfully measured. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.25506.8.3.1.3.1.13 |
| hh3cNqaResultsMinDelaySD The minimum of all one way times from source to destination. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.25506.8.3.1.3.1.14 |
| hh3cNqaResultsSumDelaySD The sum of one way times from source to destination. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.25506.8.3.1.3.1.15 |
| hh3cNqaResultsSum2DelaySD The sum of squares of one way times from source to destination. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.25506.8.3.1.3.1.16 |
| hh3cNqaResultsNumOfDelayDS The number of delay from destination to source that are
successfully measured. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.25506.8.3.1.3.1.17 |
| hh3cNqaResultsMinDelayDS The minimum of all one way times from destination to source. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.25506.8.3.1.3.1.18 |
| hh3cNqaResultsSumDelayDS The sum of one way times from destination to source. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.25506.8.3.1.3.1.19 |
| hh3cNqaResultsRttTimeouts The number of times that a NQA probe failed because the
probe timed out. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.25506.8.3.1.3.1.2 |
| hh3cNqaResultsSum2DelayDS The sum of squares of one way times from destination to source. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.25506.8.3.1.3.1.20 |
| hh3cNqaResultsRttBusies The number of times that a NQA probe failed because all
NQA tasks have been running.
If a new probe fails to start, the value of this object
is incremented. The nex… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.25506.8.3.1.3.1.3 |
| hh3cNqaResultsRttNoConnections The number of times that a NQA probe failed because the probe
destination is unavailable.
For connectionless protocol pingCtlTypes, this number should be
zero. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.25506.8.3.1.3.1.4 |
| hh3cNqaResultsRttDrops The number of times that a NQA operation failed to initiated
for unavailibility of necessary internal resources. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.25506.8.3.1.3.1.5 |
| hh3cNqaResultsRttSequenceErrors The number of packets arrived out of sequence. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.25506.8.3.1.3.1.6 |
| hh3cNqaResultsRttStatsErrors The number of some other errors. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.25506.8.3.1.3.1.7 |
| hh3cNqaResultsMaxDelayDS The maximal delay from destination device to source device.
Currently this value is only used for jitter test, and this
value is 0 in other type test. In jitter test, if destinati… | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.25506.8.3.1.3.1.9 |