hh3cAllBoardHeartbeatTimeout
HH3C-LswTRAP-MIB ·
.1.3.6.1.4.1.25506.8.35.12.3.0.52
Object
notification
This notification is generated when the active MPU or master device is disconnected from all cards or member devices.
Context
- MIB
- HH3C-LswTRAP-MIB
- OID
.1.3.6.1.4.1.25506.8.35.12.3.0.52- Type
- notification
- Status
- current
- Parent
- hh3csLswTRAPMibObjectV2Prefix
- Siblings
- 25
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hh3cCoreUsageNotification The trap indicates that the amount of core usage increased to or above
the hh3cLswCoreThreshold. | notification | - | .1.3.6.1.4.1.25506.8.35.12.3.0.1 |
| hh3cCoreUsageSevereRecoveryNotification When the product does not support hh3cLswCoreRecoveryThreshold,
the trap indicates that the core usage decreased to or below
the hh3cLswCoreThreshold.
When the product supports hh… | notification | - | .1.3.6.1.4.1.25506.8.35.12.3.0.10 |
| hh3cCoreUsageMinorNotification The trap indicates that the core usage increased to or above
the hh3cLswCoreMinorThreshold. | notification | - | .1.3.6.1.4.1.25506.8.35.12.3.0.11 |
| hh3cCoreUsageMinorRecoveryNotification When the product does not support hh3cLswCoreRecoveryThreshold,
the trap indicates that the core usage decreased to or below
the hh3cLswCoreMinorThreshold.
When the product suppor… | notification | - | .1.3.6.1.4.1.25506.8.35.12.3.0.12 |
| hh3cBoardPowerNotEnough Not enough power for the board. | notification | - | .1.3.6.1.4.1.25506.8.35.12.3.0.2 |
| hh3cAlarmInPortIn Alarm reported on the alarm-in port. | notification | - | .1.3.6.1.4.1.25506.8.35.12.3.0.3 |
| hh3cAlarmInPortRecover Alarm removed on the alarm-in port. | notification | - | .1.3.6.1.4.1.25506.8.35.12.3.0.4 |
| hh3cDMAMemoryUsageCriticalNotification The trap indicates that the free DMA-memory space decreased to or below
the critical alarm threshold. | notification | - | .1.3.6.1.4.1.25506.8.35.12.3.0.41 |
| hh3cDMAMemoryUsageRecoverNotification The trap indicates that the of free DMA-memory space increased to or above
the normal state threshold. | notification | - | .1.3.6.1.4.1.25506.8.35.12.3.0.42 |
| hh3cRemainingPowerNotEnough The trap indicates that the remaining power of the chassis is not enouth. | notification | - | .1.3.6.1.4.1.25506.8.35.12.3.0.43 |
| hh3cMMUParityError MMU(Memory Management Unit) checking error on the slot is detected,
rebooting the slot is recommended. | notification | - | .1.3.6.1.4.1.25506.8.35.12.3.0.44 |
| hh3cOutputPowerStatusNotification The trap indicates that over voltage or over current. | notification | - | .1.3.6.1.4.1.25506.8.35.12.3.0.45 |
| hh3cBoardHeartbeatTimeout This notification is generated when heartbeat between the MPU and a card times out. | notification | - | .1.3.6.1.4.1.25506.8.35.12.3.0.46 |
| hh3cBoardHeartbeatResume This notification is generated when heartbeat between the MPU and a card recovers. | notification | - | .1.3.6.1.4.1.25506.8.35.12.3.0.47 |
| hh3cCommunicateError This notification is generated when communication between LIPC nodes times out. | notification | - | .1.3.6.1.4.1.25506.8.35.12.3.0.48 |
| hh3cCommunicateResume This notification is generated when LIPC nodes are reconnected after they are disconnected. | notification | - | .1.3.6.1.4.1.25506.8.35.12.3.0.49 |
| hh3cBoardRebooted This notification is generated when reboot fails for a single card or member device. | notification | - | .1.3.6.1.4.1.25506.8.35.12.3.0.50 |
| hh3cDevTrapSlaveSwitchFail This notification is generated when an active/standby or master/subordinate switchover fails. | notification | - | .1.3.6.1.4.1.25506.8.35.12.3.0.51 |
| hh3cAllBoardHeartbeatResume This notification is generated when the active MPU or master device is reconnected to any card or member device after a disconnection. | notification | - | .1.3.6.1.4.1.25506.8.35.12.3.0.53 |
| hh3cBladeNotInsertedNotCleared This notification is generated when a blade controller is not reinserted or data about the blade controller
is not cleared a long time after it is removed. | notification | - | .1.3.6.1.4.1.25506.8.35.12.3.0.54 |
| hh3cBladeInsertedCleared This notification is generated when the removed blade controller is reinserted or data about the removed blade controller is cleared. | notification | - | .1.3.6.1.4.1.25506.8.35.12.3.0.55 |
| hh3cDevTrapSliceStarting This notification is generated when the Slice module is starting. | notification | - | .1.3.6.1.4.1.25506.8.35.12.3.0.56 |
| hh3cDevTrapSliceOnline This notification is generated when the slice module is onlined. | notification | - | .1.3.6.1.4.1.25506.8.35.12.3.0.57 |
| hh3cDevTrapSliceOffline This notification is generated when the slice module is offlined. | notification | - | .1.3.6.1.4.1.25506.8.35.12.3.0.58 |
| hh3cBoardReceiveWrongPackets This notification is generated when a board has received some wrong packets. | notification | - | .1.3.6.1.4.1.25506.8.35.12.3.0.59 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hh3cHeartbeatTimeoutSeconds Heartbeat timeout value, in seconds. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.25506.8.35.12.2.19 |