hh3cdot1dStpPortStatus
HH3C-LswRSTP-MIB ·
.1.3.6.1.4.1.25506.8.35.6.1.5.1.1
Object
column
r/w
EnabledStatus
RSTP status of the port
Context
- MIB
- HH3C-LswRSTP-MIB
- OID
.1.3.6.1.4.1.25506.8.35.6.1.5.1.1- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hh3cdot1dStpPortXEntry
- Table
- hh3cdot1dStpPortXTable
- Siblings
- 18
Syntax
EnabledStatus
- Source
- EnabledStatus
- Base type
Enumeration
Values & Constraints
Type Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hh3cdot1dStpRXRSTPBPDU Number of RSTP BPDU received | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.25506.8.35.6.1.5.1.10 |
| hh3cdot1dStpTXRSTPBPDU Number of RSTP BPDU transmitted | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.25506.8.35.6.1.5.1.11 |
| hh3cdot1dStpClearStatistics Clear RSTP statistics. Read operation not supported. | column | Enumeration | .1.3.6.1.4.1.25506.8.35.6.1.5.1.12 |
| hh3cdot1dSetStpDefaultPortCost Set PathCost back to the default setting. Read operation not supported. | column | Enumeration | .1.3.6.1.4.1.25506.8.35.6.1.5.1.13 |
| hh3cdot1dStpRootGuard If the port guard root bridge. Other bridge which want to be root can not become root through this port if enabled. | column | EnabledStatus | .1.3.6.1.4.1.25506.8.35.6.1.5.1.14 |
| hh3cdot1dStpLoopGuard Loop guard function that keep a root port or an alternate port in discarding state while the information on the port is aged out. | column | EnabledStatus | .1.3.6.1.4.1.25506.8.35.6.1.5.1.15 |
| hh3cdot1dStpPortBlockedReason Record the block reason of the port.
notBlock (1) means that the port is not in block state,.
blockForProtocol (2) means that the port is blocked by stp protocol to avoid … | column | Enumeration | .1.3.6.1.4.1.25506.8.35.6.1.5.1.16 |
| hh3cdot1dStpRXTCBPDU The number of received TC BPDUs | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.25506.8.35.6.1.5.1.17 |
| hh3cdot1dStpPortSendingBPDUType Type of BPDU which the port is sending. | column | Enumeration | .1.3.6.1.4.1.25506.8.35.6.1.5.1.18 |
| hh3cdot1dStpOperPortPointToPoint This object indicates whether the port
has connected to a point-to-point link or not.
The administrative value should be read from hh3cdot1dStpPortPointToPoint. | column | Enumeration | .1.3.6.1.4.1.25506.8.35.6.1.5.1.19 |
| hh3cdot1dStpPortEdgeport Whether the port can be an edge port | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.25506.8.35.6.1.5.1.2 |
| hh3cdot1dStpPortPointToPoint It is the administrative value indicates whether the port
can be connected to a point-to-point link or not.
If the value is 'auto', the operative value of a point-t… | column | Enumeration | .1.3.6.1.4.1.25506.8.35.6.1.5.1.3 |
| hh3cdot1dStpMcheck Check if the port transfer state machine enters | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.25506.8.35.6.1.5.1.4 |
| hh3cdot1dStpTransLimit Packet transmission limit of the bridge in a duration of Hello Time. | column | Integer32 | .1.3.6.1.4.1.25506.8.35.6.1.5.1.5 |
| hh3cdot1dStpRXStpBPDU Number of STP BPDU received | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.25506.8.35.6.1.5.1.6 |
| hh3cdot1dStpTXStpBPDU Number of STP BPDU transmitted | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.25506.8.35.6.1.5.1.7 |
| hh3cdot1dStpRXTCNBPDU Number of TCN BPDU received | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.25506.8.35.6.1.5.1.8 |
| hh3cdot1dStpTXTCNBPDU Number of TCN BPDU transmitted | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.25506.8.35.6.1.5.1.9 |