hh3cEponUniDescr
HH3C-EPON-UNI-MIB ·
.1.3.6.1.4.1.25506.2.42.5.1.1.1.2
Object
column
r/w
OctetString
A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the interface hardware and software.
Context
- MIB
- HH3C-EPON-UNI-MIB
- OID
.1.3.6.1.4.1.25506.2.42.5.1.1.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hh3cEponUniSysManEntry
- Table
- hh3cEponUniSysManTable
- Siblings
- 34
Syntax
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hh3cEponUniIndex The index value which uniquely identifies the FE(fast Ethernet)
interface of the ONU. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.25506.2.42.5.1.1.1.1 |
| hh3cEponUniVLANTrunkAllowListHigh Each octet within this value specifies a set of eight VLANs,
with the first octet specifying VLANs 2049 through 2056, the
second octet specifying VLANs 2057 through 2064, etc. Wit… | column | OctetString | .1.3.6.1.4.1.25506.2.42.5.1.1.1.10 |
| hh3cEponUniInboundLineRate The value of the inbound line-rate. measured with kbps.
The upper limit of the line-rate is the value of
hh3cEponUniLineRateMax in the entry. It must be multiple
of the value of… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.25506.2.42.5.1.1.1.11 |
| hh3cEponUniOutboundLineRate The value of the outbound line-rate. measured with kbps.
The upper limit of the line-rate is the value of
hh3cEponUniLineRateMax in the entry. It must be multiple
of the value of… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.25506.2.42.5.1.1.1.12 |
| hh3cEponUniFlowControl Flow control status.
true(1) - Flow control status enable.
false(2) - Flow control status disable. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.25506.2.42.5.1.1.1.13 |
| hh3cEponUniSpeed User network interface speed. | column | Enumeration | .1.3.6.1.4.1.25506.2.42.5.1.1.1.14 |
| hh3cEponUniDuplex User network interface mode. | column | Enumeration | .1.3.6.1.4.1.25506.2.42.5.1.1.1.15 |
| hh3cEponUniVlanVPNStatus vlan VPN status.
true(1) - vlan VPN status enable.
false(2) - vlan VPN disable. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.25506.2.42.5.1.1.1.16 |
| hh3cEponUniCountReset Reset the counter which is about packets of the interface,
then the counter will change to zero. There is no sense in
reading this object. | column | Enumeration | .1.3.6.1.4.1.25506.2.42.5.1.1.1.17 |
| hh3cEponUniPortIsolate enable - enable UNI port isolate setting.
disable - disable UNI port isolate setting. | column | Enumeration | .1.3.6.1.4.1.25506.2.42.5.1.1.1.18 |
| hh3cEponUniVlanConfiguration The vlan configuration of the related vlan mode.
Transparent vlan mode: hh3cEponUniVlanConfiguration is a
zero length string.
Tag vlan mode: the first four octets were the tag
ass… | column | OctetString | .1.3.6.1.4.1.25506.2.42.5.1.1.1.23 |
| hh3cEponUniAutoNegotiation enable - enable auto negotiation.
disable - disable auto negotiation. | column | Enumeration | .1.3.6.1.4.1.25506.2.42.5.1.1.1.25 |
| hh3cEponUniRestartAutoNeg Force to restart the auto negotiation process. | column | Enumeration | .1.3.6.1.4.1.25506.2.42.5.1.1.1.26 |
| hh3cEponUniLinkStatus The link status of UNI. | column | Enumeration | .1.3.6.1.4.1.25506.2.42.5.1.1.1.29 |
| hh3cEponUniAdminStatus The desired state of the user network interface. When a managed
system initializes, all user network interfaces start with down(2)
state. The testing(3)state indicates that no ope… | column | Enumeration | .1.3.6.1.4.1.25506.2.42.5.1.1.1.3 |
| hh3cEponUniInterfaceType UNI interface type. | column | Enumeration | .1.3.6.1.4.1.25506.2.42.5.1.1.1.30 |
| hh3cEponUniVitualCableTest True(1): Virtual cable test enable.
False(2): Virtual cable test disable. | column | Enumeration | .1.3.6.1.4.1.25506.2.42.5.1.1.1.31 |
| hh3cEponUniVCTCableStatus Get the cable status.
Normal(1),cable is normal.
Abnormal(2),cable is abnormal.
AbnormalOpen(3),cable is abnormal because of open circuit.
AbnormalShort(4),cable is abnormal becau… | column | Enumeration | .1.3.6.1.4.1.25506.2.42.5.1.1.1.32 |
| hh3cEponUniVCTCableLength Get the cable length.
When hh3cEponUniVCTCableStatus is normal,
the node stands for the length from the UNI port to the port opposite.
When hh3cEponUniVCTCableStatus is abnormal,
… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.25506.2.42.5.1.1.1.33 |
| hh3cEponUniVCTImpedanceMismatch Get the cable impedance.
Not-support(1),the UNI port does not support this function.
True(2),impedance match.
False(3),impedance mismatch. | column | Enumeration | .1.3.6.1.4.1.25506.2.42.5.1.1.1.34 |
| hh3cEponUniVCTPairSkew Get the symmetry of cable.
If the function is not supported,
the default value 0 will be returned.
Unit:nanosecond(ns). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.25506.2.42.5.1.1.1.35 |
| hh3cEponUniVCTPairSwap NotSupport(1),the UNI port does not support this function.
True(2),pair swap.
False(3),not pair swap. | column | Enumeration | .1.3.6.1.4.1.25506.2.42.5.1.1.1.36 |
| hh3cEponUniVCTPolaritySwap NotSupport(1),the UNI port does not support this function.
True(2),polarity swap.
False(3),not polarity swap. | column | Enumeration | .1.3.6.1.4.1.25506.2.42.5.1.1.1.37 |
| hh3cEponUniVCTInsertionLoss If the function is not supported,
the default value 0 will be returned.
Unit:decibel(db). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.25506.2.42.5.1.1.1.38 |
| hh3cEponUniVCTReturnLoss If the function is not supported,
the default value 0 will be returned.
Unit:decibel(db). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.25506.2.42.5.1.1.1.39 |
| hh3cEponUniMdi Type of the line connected to UNI interface:
mdi-ii(straight-through cable),
mdi-x (crossover cable),
mdi-auto (auto-sensing). | column | Enumeration | .1.3.6.1.4.1.25506.2.42.5.1.1.1.4 |
| hh3cEponUniVCTNearendCrosstalk If the function is not supported,
the default value 0 will be returned.
Unit:decibel(db). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.25506.2.42.5.1.1.1.40 |
| hh3cEponUniVlan If the function is not supported,
the default value 0 will be returned.
Unit:decibel(db). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.25506.2.42.5.1.1.1.41 |
| hh3cEponUniMacMax The maximum number of MAC addresses that the UNI port can learn.
no-limit(65535)
others(0~65534) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.25506.2.42.5.1.1.1.42 |
| hh3cEponUniPriority The priority of user network interface. If the value is larger,
the priority will be higher. | column | Integer32 | .1.3.6.1.4.1.25506.2.42.5.1.1.1.5 |
| hh3cEponUniVlanType UNI vlan types. | column | Enumeration | .1.3.6.1.4.1.25506.2.42.5.1.1.1.6 |
| hh3cEponUniAccessVlan The vlan ID assigned to untagged frames or Priority-Tagged
frames received on user network interface. | column | Integer32 | .1.3.6.1.4.1.25506.2.42.5.1.1.1.7 |
| hh3cEponUniTrunkPvid PVID(port vlan ID), the vlan ID assigned to untagged frames or
Priority-Tagged frames received on user network interface. | column | Integer32 | .1.3.6.1.4.1.25506.2.42.5.1.1.1.8 |
| hh3cEponUniVLANTrunkAllowListLow Each octet within this value specifies a set of eight VLANs,
with the first octet specifying VLANs 1 through 8, the second
octet specifying VLANs 9 through 16, etc. Within each o… | column | OctetString | .1.3.6.1.4.1.25506.2.42.5.1.1.1.9 |