hh3cDot11RadioModeSupport

HH3C-DOT11-APMT-MIB · .1.3.6.1.4.1.25506.2.75.2.1.3.1.11

Object

column SNMPv2-SMIUnsigned32

Represents radio type supported by the radio.
The WLAN system supports the following possible radio type:
dot11a(1),
dot11b(2),
dot11g(4),
dot11gn(16),
dot11an(32),
dot11ac(64),
dot11gac(128)
For the radio, it could support multiple radio types at
the same time.  So the value of this object could combine multiple
values of radio type above.
For example:
For one radio which supports both dot11b and dot11g mode, when get
value from the object, the value is 6(2 + 4).

Context

MIB: HH3C-DOT11-APMT-MIB
OID: .1.3.6.1.4.1.25506.2.75.2.1.3.1.11
Type: column
Access: readonly
Status: current
Parent: hh3cDot11APRadioEntry
Table: hh3cDot11APRadioTable
Siblings: 34

Syntax

SNMPv2-SMIUnsigned32

Source: SNMPv2-SMIUnsigned32
Base type: Unsigned32

Values & Constraints

Type Constraints

range: 0..4294967295

Related Objects

Sibling Objects

Object	Type	Syntax	OID
hh3cDot11CurAPID To uniquely identify a AP in running status.	column	OctetString	`.1.3.6.1.4.1.25506.2.75.2.1.3.1.1`
hh3cDot11ResourceUseRatio Represents the ratio of radio resource usage.	column	onepercent SNMPv2-SMIInteger32	`.1.3.6.1.4.1.25506.2.75.2.1.3.1.10`
hh3cDot11TxPowerLevel2 The TxPowerLevel N currently being used to transmit data.	column	Integer32	`.1.3.6.1.4.1.25506.2.75.2.1.3.1.12`
hh3cDot11PowerMgmtStatus Represents status of power management of the radio.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.25506.2.75.2.1.3.1.13`
hh3cDot11ChannelSwitchTimes Represents the channel switch times.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.25506.2.75.2.1.3.1.14`
hh3cDot11AntennaType Represents type of the antenna which radio used.	column	OctetString	`.1.3.6.1.4.1.25506.2.75.2.1.3.1.15`
hh3cDot11DiversitySelectionRx Represents the diversity selection received.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.25506.2.75.2.1.3.1.16`
hh3cDot11MaxTxPwrLvl Represents the maximum transmit power.	column	OctetString	`.1.3.6.1.4.1.25506.2.75.2.1.3.1.17`
hh3cDot11PwrAttRange Represents the range of power attenuation.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.25506.2.75.2.1.3.1.18`
hh3cDot11AvgRxSignalStrength Represents the average received signal strength.	column	dBm SNMPv2-SMIInteger32	`.1.3.6.1.4.1.25506.2.75.2.1.3.1.19`
hh3cDot11RadioID Represents each radio.	column	Integer32	`.1.3.6.1.4.1.25506.2.75.2.1.3.1.2`
hh3cDot11HighestRxSignalStrength Represents the highest received signal strength.	column	dBm SNMPv2-SMIInteger32	`.1.3.6.1.4.1.25506.2.75.2.1.3.1.20`
hh3cDot11LowestRxSignalStrength Represents the lowest received signal strength.	column	dBm SNMPv2-SMIInteger32	`.1.3.6.1.4.1.25506.2.75.2.1.3.1.21`
hh3cDot11RadioIfUpdownTimes Represents the up/down times on radio interface.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.25506.2.75.2.1.3.1.22`
hh3cDot11RadioIfLastChange Represents time at last change that occurred on radio interface.	column	SNMPv2-SMITimeTicks	`.1.3.6.1.4.1.25506.2.75.2.1.3.1.23`
hh3cDot11RadioModeSupport2 Represents radio type supported by the radio. The WLAN system supports the following possible radio type: dot11a(1), dot11b(2), dot11g(4), dot11an(8), dot11gn(16), dot11gac(32), d…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.25506.2.75.2.1.3.1.24`
hh3cDot11OperStatusCM Represents the operational status of radio.	column	Enumeration	`.1.3.6.1.4.1.25506.2.75.2.1.3.1.25`
hh3cDot11AirPrimChnlBusy Represents air interface utilization on the primary channel. The value 255 represents an invalid value.	column	Integer32	`.1.3.6.1.4.1.25506.2.75.2.1.3.1.26`
hh3cDot11AirPrimChnlTxBusy Represents air interface utilization for signal sending on the primary channel. The value 255 represents an invalid value.	column	Integer32	`.1.3.6.1.4.1.25506.2.75.2.1.3.1.27`
hh3cDot11AirPrimChnlRxBusy Represents air interface utilization for signal receiving on the primary channel. The value 255 represents an invalid value.	column	Integer32	`.1.3.6.1.4.1.25506.2.75.2.1.3.1.28`
hh3cDot11AirExtChnlBusy Represents air interface utilization on the secondary channel. The value 255 represents an invalid value.	column	Integer32	`.1.3.6.1.4.1.25506.2.75.2.1.3.1.29`
hh3cDot11AdminStatus Represents the administrator status of radio.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.25506.2.75.2.1.3.1.3`
hh3cDot11RadioType Represents the radio type of the radio.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.25506.2.75.2.1.3.1.30`
hh3cDot11RadioOper Set the status of the radio.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.25506.2.75.2.1.3.1.31`
hh3cDot11BindSSID Represents all SSIDs of the radio.	column	OctetString	`.1.3.6.1.4.1.25506.2.75.2.1.3.1.32`
hh3cDot11RadioAverageSignalStrength Represents the average received signal strength.	column	dBm SNMPv2-SMIInteger32	`.1.3.6.1.4.1.25506.2.75.2.1.3.1.33`
hh3cDot11RadioMaxSignalStrength Represents the highest received signal strength.	column	dBm SNMPv2-SMIInteger32	`.1.3.6.1.4.1.25506.2.75.2.1.3.1.34`
hh3cDot11RadioMinSignalStrength Represents the lowest received signal strength.	column	dBm SNMPv2-SMIInteger32	`.1.3.6.1.4.1.25506.2.75.2.1.3.1.35`
hh3cDot11OperStatus Represents the operational status of radio.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.25506.2.75.2.1.3.1.4`
hh3cDot11Channel Represents the current channel allocation for radio.	column	HH3C-DOT11-REF-MIBHh3cDot11ChannelScopeType	`.1.3.6.1.4.1.25506.2.75.2.1.3.1.5`
hh3cDot11TxPowerLevel Represents the current transmit power level for radio.	column	dbm HH3C-DOT11-REF-MIBHh3cDot11TxPwrLevelScopeType	`.1.3.6.1.4.1.25506.2.75.2.1.3.1.6`
hh3cDot11APRadioIfIndex Represents the interface index for the radio.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.25506.2.75.2.1.3.1.7`
hh3cDot11AntennaGain Represents the current gain for antenna.	column	dBi SNMPv2-SMIInteger32	`.1.3.6.1.4.1.25506.2.75.2.1.3.1.8`
hh3cDot11MaxBandwidth Represents the maximum bandwidth for the radio.	column	Mbps SNMPv2-SMIInteger32	`.1.3.6.1.4.1.25506.2.75.2.1.3.1.9`