hcAlarmVariable
HC-ALARM-MIB ·
.1.3.6.1.2.1.16.29.1.1.1.1.3
Object
The object identifier of the particular variable to be
sampled. Only variables that resolve to an ASN.1 primitive
type of INTEGER (INTEGER, Integer32, Counter32, Counter64,
Gauge, or TimeTicks) may be sampled.
Because SNMP access control is articulated entirely in terms
of the contents of MIB views, no access control mechanism
exists that can restrict the value of this object to
identify only those objects that exist in a particular MIB
view. Because there is thus no acceptable means of
restricting the read access that could be obtained through
the alarm mechanism, the probe must only grant write access
to this object in those views that have read access to all
objects on the probe.
This object may not be modified if the associated
hcAlarmStatus object is equal to active(1).
Context
- MIB
- HC-ALARM-MIB
- OID
.1.3.6.1.2.1.16.29.1.1.1.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hcAlarmEntry
- Table
- hcAlarmTable
- Siblings
- 18
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hcAlarmIndex An arbitrary integer index value used to uniquely identify
this high capacity alarm entry. | column | Integer32 | .1.3.6.1.2.1.16.29.1.1.1.1.1 |
| hcAlarmRisingThresholdValStatus This object indicates the sign of the data for the rising
threshold, as defined by the hcAlarmRisingThresAbsValueLo
and hcAlarmRisingThresAbsValueHi objects, as described in
the H… | column | HcValueStatus | .1.3.6.1.2.1.16.29.1.1.1.1.10 |
| hcAlarmFallingThreshAbsValueLo The lower 32 bits of the absolute value for threshold for
the sampled statistic. The actual threshold value is
determined by the associated instances of the
hcAlarmFallingThreshA… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.16.29.1.1.1.1.11 |
| hcAlarmFallingThreshAbsValueHi The upper 32 bits of the absolute value for threshold for
the sampled statistic. The actual threshold value is
determined by the associated instances of the
hcAlarmFallingThreshA… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.16.29.1.1.1.1.12 |
| hcAlarmFallingThresholdValStatus This object indicates the sign of the data for the falling
threshold, as defined by the hcAlarmFallingThreshAbsValueLo
and hcAlarmFallingThreshAbsValueHi objects, as described in
… | column | HcValueStatus | .1.3.6.1.2.1.16.29.1.1.1.1.13 |
| hcAlarmRisingEventIndex The index of the eventEntry that is used when a rising
threshold is crossed. The eventEntry identified by a
particular value of this index is the same as identified by
the same v… | column | Integer32 | .1.3.6.1.2.1.16.29.1.1.1.1.14 |
| hcAlarmFallingEventIndex The index of the eventEntry that is used when a falling
threshold is crossed. The eventEntry identified by a
particular value of this index is the same as identified by
the same … | column | Integer32 | .1.3.6.1.2.1.16.29.1.1.1.1.15 |
| hcAlarmValueFailedAttempts The number of times the associated hcAlarmVariable instance
was polled on behalf of this hcAlarmEntry, (while in the
active state) and the value was not available. This counter
m… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.16.29.1.1.1.1.16 |
| hcAlarmOwner The entity that configured this entry and is therefore
using the resources assigned to it. | column | RMON-MIBOwnerString | .1.3.6.1.2.1.16.29.1.1.1.1.17 |
| hcAlarmStorageType The type of non-volatile storage configured for this entry.
If this object is equal to 'permanent(4)', then the
associated hcAlarmRisingEventIndex and
hcAlarmFallingEventIndex obj… | column | SNMPv2-TCStorageType | .1.3.6.1.2.1.16.29.1.1.1.1.18 |
| hcAlarmStatus The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description claus… | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.16.29.1.1.1.1.19 |
| hcAlarmInterval The interval in seconds over which the data is sampled and
compared with the rising and falling thresholds. When
setting this variable, care should be taken in the case of
deltaV… | column | seconds Integer32 | .1.3.6.1.2.1.16.29.1.1.1.1.2 |
| hcAlarmSampleType The method of sampling the selected variable and
calculating the value to be compared against the thresholds.
If the value of this object is absoluteValue(1), the value
of the sel… | column | Enumeration | .1.3.6.1.2.1.16.29.1.1.1.1.4 |
| hcAlarmAbsValue The absolute value (i.e., unsigned value) of the
hcAlarmVariable statistic during the last sampling period.
The value during the current sampling period is not made
available unti… | column | HCNUM-TCCounterBasedGauge64 | .1.3.6.1.2.1.16.29.1.1.1.1.5 |
| hcAlarmValueStatus This object indicates the validity and sign of the data for
the hcAlarmAbsValue object, as described in the
HcValueStatus textual convention. | column | HcValueStatus | .1.3.6.1.2.1.16.29.1.1.1.1.6 |
| hcAlarmStartupAlarm The alarm that may be sent when this entry is first set to
active. If the first sample after this entry becomes active
is greater than or equal to the rising thres… | column | Enumeration | .1.3.6.1.2.1.16.29.1.1.1.1.7 |
| hcAlarmRisingThreshAbsValueLo The lower 32 bits of the absolute value for threshold for
the sampled statistic. The actual threshold value is
determined by the associated instances of the
hcAlarmRisingThreshAb… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.16.29.1.1.1.1.8 |
| hcAlarmRisingThreshAbsValueHi The upper 32 bits of the absolute value for threshold for
the sampled statistic. The actual threshold value is
determined by the associated instances of the
hcAlarmRisingThreshAb… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.16.29.1.1.1.1.9 |