h3cTunnelGreAddressType
H3C-TUNNEL-MIB ·
.1.3.6.1.4.1.2011.10.2.53.1.1.6.1.3
Object
The type of address in the corresponding h3cTunnelGreLocalAddr and h3cTunnelGreRemoteAddr objects.
Context
- MIB
- H3C-TUNNEL-MIB
- OID
.1.3.6.1.4.1.2011.10.2.53.1.1.6.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- h3cTunnelGreEntry
- Table
- h3cTunnelGreTable
- Siblings
- 9
Syntax
INET-ADDRESS-MIBInetAddressType
- Source
- INET-ADDRESS-MIBInetAddressType
- Base type
Enumeration
Values & Constraints
Type Values
0 | unknown |
1 | ipv4 |
2 | ipv6 |
3 | ipv4z |
4 | ipv6z |
16 | dns |
25 | l2vpn |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| h3cTunnelGreTunnNum Tunnel number. An identifier used to distinguish
between multiple tunnels. | column | Integer32 | .1.3.6.1.4.1.2011.10.2.53.1.1.6.1.1 |
| h3cTunnelGreTunnStatus The status of this row, by which new entries may be
created, or old entries deleted from this table. The
agent need not support setting this object to
createAndWait or notInServi… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.10.2.53.1.1.6.1.10 |
| h3cTunnelGreTunnIfIndex A unique value, greater than zero, for each
interface. It is recommended that values are assigned
contiguously starting from 1. The value for each
interface sub-layer must remai… | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2011.10.2.53.1.1.6.1.2 |
| h3cTunnelGreLocalAddr The address of the local endpoint of the tunnel
(i.e., the source address used in the outer IP
header). | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.10.2.53.1.1.6.1.4 |
| h3cTunnelGreRemoteAddr The address of the remote endpoint of the tunnel
(i.e., the destination address used in the outer IP
header). | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.10.2.53.1.1.6.1.5 |
| h3cTunnelGreKeepaliveEnabled This MIB object specifies whether or not keepalive is used.
A value of true indicates that keepalive SHOULD be used.
When keepalive is not be used, the value of
h3cTunnelGreKeepal… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.53.1.1.6.1.6 |
| h3cTunnelGreKeepaliveInterval The method used to assign the keepalive interval.
The value is zero when keepalive is not used.
The valid value is from 1 to 32767, when keepalive is used. | column | Integer32 | .1.3.6.1.4.1.2011.10.2.53.1.1.6.1.7 |
| h3cTunnelGreKeepaliveTimes The method used to assign the keepalive maximum number
of consecutive keepalive failures that are allowed.
The value is zero when keepalive is not used.
The valid value is from 1 … | column | Integer32 | .1.3.6.1.4.1.2011.10.2.53.1.1.6.1.8 |
| h3cTunnelGreSlbgGroupNum The method used to assign the service-loopback-group. | column | Unsigned32 | .1.3.6.1.4.1.2011.10.2.53.1.1.6.1.9 |