h3cTransceiverErrors
H3C-TRANSCEIVER-INFO-MIB ·
.1.3.6.1.4.1.2011.10.2.70.1.1.1.38
Object
column
Bits
Bitmask indicating transceiver errors. Transceiver information I/O error(0) Transceiver information checksum error(1) Transceiver type and port configuration mismatch(2) Transceiver type not supported by port hardware(3) WIS local fault(4) Receive optical power fault(5) PMA/PMD receiver local fault(6) PCS receive local fault(7) PHY XS receive local fault(8) Laser bias current fault(9) Laser temperature fault(10) Laser output power fault(11) TX fault(12) PMA/PMD transmitter local fault(13) PCS transmit local fault(14) PHY XS Transmit Local Fault(15) RX loss of signal(16) TEC error(17) Wavelength unlocked(18) Tx is not ready due to tuning(19) Unused(20-31)
Context
- MIB
- H3C-TRANSCEIVER-INFO-MIB
- OID
.1.3.6.1.4.1.2011.10.2.70.1.1.1.38- Type
- column
- Access
- readonly
- Status
- current
- Parent
- h3cTransceiverInfoEntry
- Table
- h3cTransceiverInfoTable
- Siblings
- 47
Syntax
Bits
Values & Constraints
Enumerated Values
0 | xcvrIOError |
1 | xcvrChecksum |
2 | xcvrTypeAndPortConfigMismatch |
3 | xcvrTypeNotSupported |
4 | wisLocalFault |
5 | rcvOpticalPowerFault |
6 | pmapmdReceiverLocalFault |
7 | pcsReceiveLocalFault |
8 | phyXSReceiveLocalFault |
9 | laserBiasCurrentFault |
10 | laserTemperatureFault |
11 | laserOutputPowerFault |
12 | txFault |
13 | pmapmdTransmitterLocalFault |
14 | pcsTransmitLocalFault |
15 | phyXSTransmitLocalFault |
16 | rxLossOfSignal |
17 | tecError |
18 | wavelengthUnlocked |
19 | txIsNotReadyDueToTuning |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| h3cTransceiverHardwareType Hardware type of the interface, such as SM(single mode). | column | OctetString | .1.3.6.1.4.1.2011.10.2.70.1.1.1.1 |
| h3cTransceiverMaxTXPower Indicating the maximum transmitted power.
The unit is in hundredths of dBM. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.70.1.1.1.10 |
| h3cTransceiverMinTXPower Indicating the minimum transmitted power.
The unit is in hundredths of dBM. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.70.1.1.1.11 |
| h3cTransceiverCurRXPower Indicating the current received power.
The unit is in hundredths of dBM. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.70.1.1.1.12 |
| h3cTransceiverMaxRXPower Indicating the maximum received power.
The unit is in hundredths of dBM. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.70.1.1.1.13 |
| h3cTransceiverMinRXPower Indicating the minimum received power.
The unit is in hundredths of dBM. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.70.1.1.1.14 |
| h3cTransceiverTemperature Indicating the current temperature.
The unit is Celsius centigrade. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.70.1.1.1.15 |
| h3cTransceiverVoltage Indicating the current voltage.
The unit is in hundredths of V | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.70.1.1.1.16 |
| h3cTransceiverBiasCurrent Indicating the current bias electric current.
The unit is in hundredths of mA | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.70.1.1.1.17 |
| h3cTransceiverTempHiAlarm Transceiver temperature high alarm threshold
in thousandths of degrees Celsius.
As an example: 49120 is 49.120 degrees Celsius. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.70.1.1.1.18 |
| h3cTransceiverTempLoAlarm Transceiver temperature low alarm threshold
in thousandths of degrees Celsius.
As an example: 49120 is 49.120 degrees Celsius. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.70.1.1.1.19 |
| h3cTransceiverType Type of the interface, such as SFP/XFP/GBIC. | column | OctetString | .1.3.6.1.4.1.2011.10.2.70.1.1.1.2 |
| h3cTransceiverTempHiWarn Transceiver temperature high warning threshold
in thousandths of degrees Celsius.
As an example: 49120 is 49.120 degrees Celsius. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.70.1.1.1.20 |
| h3cTransceiverTempLoWarn Transceiver temperature low warning threshold
in thousandths of degrees Celsius.
As an example: 49120 is 49.120 degrees Celsius. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.70.1.1.1.21 |
| h3cTransceiverVccHiAlarm Transceiver VCC high alarm threshold
in hundreds of microvolts.
As an example: 32928 is 3.2928 volts.
Returns zero if not supported on the transceiver. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.70.1.1.1.22 |
| h3cTransceiverVccLoAlarm Transceiver VCC low alarm threshold
in hundreds of microvolts.
As an example: 32928 is 3.2928 volts.
Returns zero if not supported on the transceiver. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.70.1.1.1.23 |
| h3cTransceiverVccHiWarn Transceiver VCC high warning threshold
in hundreds of microvolts.
As an example: 32928 is 3.2928 volts.
Returns zero if not supported on the transceiver. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.70.1.1.1.24 |
| h3cTransceiverVccLoWarn Transceiver VCC low warning threshold
in hundreds of microvolts.
As an example: 32928 is 3.2928 volts.
Returns zero if not supported on the transceiver. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.70.1.1.1.25 |
| h3cTransceiverBiasHiAlarm Transceiver bias high alarm threshold in microamps. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.70.1.1.1.26 |
| h3cTransceiverBiasLoAlarm Transceiver bias low alarm threshold in microamps. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.70.1.1.1.27 |
| h3cTransceiverBiasHiWarn Transceiver bias high warning threshold in microamps. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.70.1.1.1.28 |
| h3cTransceiverBiasLoWarn Transceiver bias low warning threshold in microamps. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.70.1.1.1.29 |
| h3cTransceiverWaveLength Wave length of the interface, measured in nanometer.
The unit is nm. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.70.1.1.1.3 |
| h3cTransceiverPwrOutHiAlarm Transceiver transmit power high alarm
threshold in tenths of microwatts.
As an example: 10000 is 1 milliwatt. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.70.1.1.1.30 |
| h3cTransceiverPwrOutLoAlarm Transceiver transmit power low alarm
threshold in tenths of microwatts.
As an example: 10000 is 1 milliwatt. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.70.1.1.1.31 |
| h3cTransceiverPwrOutHiWarn Transceiver transmit power high warning
threshold in tenths of microwatts
As an example: 10000 is 1 milliwatt. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.70.1.1.1.32 |
| h3cTransceiverPwrOutLoWarn Transceiver transmit power low warning
threshold in tenths of microwatts.
As an example: 10000 is 1 milliwatt. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.70.1.1.1.33 |
| h3cTransceiverRcvPwrHiAlarm Transceiver receive power high alarm
threshold in tenths of microwatts.
As an example: 10000 is 1 milliwatt. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.70.1.1.1.34 |
| h3cTransceiverRcvPwrLoAlarm Transceiver receive power low alarm
threshold in tenths of microwatts.
As an example: 10000 is 1 milliwatt. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.70.1.1.1.35 |
| h3cTransceiverRcvPwrHiWarn Transceiver receive power high warning
threshold in tenths of microwatts.
As an example: 10000 is 1 milliwatt. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.70.1.1.1.36 |
| h3cTransceiverRcvPwrLoWarn Transceiver receive power low warning
threshold in tenths of microwatts.
As an example: 10000 is 1 milliwatt. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.70.1.1.1.37 |
| h3cTransceiverVendorOUI Vendor OUI of the interface. | column | OctetString | .1.3.6.1.4.1.2011.10.2.70.1.1.1.39 |
| h3cTransceiverVendorName Vendor name of the interface. | column | OctetString | .1.3.6.1.4.1.2011.10.2.70.1.1.1.4 |
| h3cTransceiverRevisionNumber Revision number of the interface. | column | OctetString | .1.3.6.1.4.1.2011.10.2.70.1.1.1.40 |
| h3cTransceiverFrequency The frequency of the current ITU channel on the connected transceiver.
The unit is hundredths of THz. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.70.1.1.1.41 |
| h3cTransceiverActiveITUChannel The index of the current ITU channel on the connected transceiver.
The maximum index number for the ITU channel might vary by transceiver model.
The value of this node depends on … | column | Unsigned32 | .1.3.6.1.4.1.2011.10.2.70.1.1.1.42 |
| h3cTransceiverCurWaveErr The current wavelength error of the current ITU channel
on the connected transceiver.
The unit is thousandths of nm. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.70.1.1.1.43 |
| h3cTransceiverWaveErrHiAlarm The high wavelength error alarm threshold of the
current ITU channel on the connected transceiver.
The unit is thousandths of nm. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.70.1.1.1.44 |
| h3cTransceiverWaveErrLoAlarm The low wavelength error alarm threshold of the
current ITU channel on the connected transceiver.
The unit is thousandths of nm. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.70.1.1.1.45 |
| h3cTransceiverCurFreqErr The current frequency error of the current ITU channel
on the connected transceiver.
The unit is tenths of GHz. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.70.1.1.1.46 |
| h3cTransceiverFreqErrHiAlarm The high frequency error alarm threshold of the current
ITU channel on the connected transceiver.
The unit is tenths of GHz. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.70.1.1.1.47 |
| h3cTransceiverFreqErrLoAlarm The low frequency error alarm threshold of the current
ITU channel on the connected transceiver.
The unit is tenths of GHz. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.70.1.1.1.48 |
| h3cTransceiverSerialNumber Serial number of the interface. | column | OctetString | .1.3.6.1.4.1.2011.10.2.70.1.1.1.5 |
| h3cTransceiverFiberDiameterType The diameter of the fiber, measured in micron.
fiber9 - 9 micron multi-mode fiber
fiber50 - 50 micron multi-mode fiber
fiber625 - 62.5 micron multi-mode fiber
copper - copper cabl… | column | Enumeration | .1.3.6.1.4.1.2011.10.2.70.1.1.1.6 |
| h3cTransceiverTransferDistance The maximum distance which the interface can transmit,
measured in meter. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.70.1.1.1.7 |
| h3cTransceiverDiagnostic Indicating the digital diagnostic monitoring function. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.70.1.1.1.8 |
| h3cTransceiverCurTXPower Indicating the current transmitted power.
The unit is in hundredths of dBM. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.70.1.1.1.9 |