h3cNqaStatResSentProbes

H3C-NQA-MIB · .1.3.6.1.4.1.2011.10.8.3.1.11.1.8
MIB view Table view

Object

column probes SNMPv2-SMICounter32 
The value of this object reflects the number of probes sent.
The value of this object MUST be reported as 0 when no probes
have been sent.

Context

MIB
H3C-NQA-MIB
OID
.1.3.6.1.4.1.2011.10.8.3.1.11.1.8
Type
column
Access
readonly
Status
current
Units
probes
Parent
h3cNqaStatisticsResultsEntry
Table
h3cNqaStatisticsResultsTable
Siblings
30

Syntax

probes SNMPv2-SMICounter32
Source
SNMPv2-SMICounter32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
h3cNqaStatResIndex
An entry in this table is created when the statistics result of a NQA probe is determined. An implementation MUST start assigning h3cNqaStatResIndex values at 1 and…
columnUnsigned32.1.3.6.1.4.1.2011.10.8.3.1.11.1.1
h3cNqaStatResStartTime
This object contains the start time of the statistic.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.2011.10.8.3.1.11.1.10
h3cNqaStatResInterval
This object contains the interval between two times of statistic.
columnseconds SNMPv2-SMIGauge32.1.3.6.1.4.1.2011.10.8.3.1.11.1.11
h3cNqaStatResRttNumDisconnects
The number of times that a NQA probe failed because the destination became disconnected. For connectionless protocol pingCtlTypes, this number should be zero.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.10.8.3.1.11.1.12
h3cNqaStatResRttTimeouts
The number of times that a probe failed because the probe timed out.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.10.8.3.1.11.1.13
h3cNqaStatResRttBusies
The number of times that a NQA probe failed because errors related to sockets.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.10.8.3.1.11.1.14
h3cNqaStatResRttNoConnections
The number of times that a NQA probe failed because the probe destination is unavailable. For connectionless protocol pingCtlTypes, this number should be zero.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.10.8.3.1.11.1.15
h3cNqaStatResRttDrops
The number of times that a NQA operation failed to initiate for unavailibility of necessary internal resources.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.10.8.3.1.11.1.16
h3cNqaStatResRttSequenceErrors
The number of packets arrived out of sequence.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.10.8.3.1.11.1.17
h3cNqaStatResRttErrors
The number of other errors.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.10.8.3.1.11.1.18
h3cNqaStatResLostPacketRatio
The value of this object reflects the drop rate of NQA test packet. For example, if the value is 30, that means source device only had received 70 percent packets of total sent pa…
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.2011.10.8.3.1.11.1.19
h3cNqaStatResIpTargetAddressType
This object indicates the type of address stored in the corresponding h3cNqaStatResIpTargetAddress object.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.2011.10.8.3.1.11.1.2
h3cNqaStatResPacketLateArrival
The value of this object reflects the number of the packets that arrived after the timeout.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.10.8.3.1.11.1.20
h3cNqaStatResRttSum
This object contains the sum for all NQA responses received during the test lifetime. The value of this object MUST be reported as 0 when no NQA responses have been received.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.10.8.3.1.11.1.21
h3cNqaStatResNumOfDelaySD
The number of one way times from source to destination that are successfully measured.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.10.8.3.1.11.1.22
h3cNqaStatResMinDelaySD
The minimum one way times from source to destination.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.2011.10.8.3.1.11.1.23
h3cNqaStatResMaxDelaySD
The maximum one way times from source to destination.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.2011.10.8.3.1.11.1.24
h3cNqaStatResSumDelaySD
The sum of one way times from source to destination.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.10.8.3.1.11.1.25
h3cNqaStatResSum2DelaySD
The sum of squares of one way times from source to destination.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.10.8.3.1.11.1.26
h3cNqaStatResNumOfDelayDS
The number of one way times from destination to source that are successfully measured.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.10.8.3.1.11.1.27
h3cNqaStatResMinDelayDS
The minimum one way times from destination to source.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.2011.10.8.3.1.11.1.28
h3cNqaStatResMaxDelayDS
The maximum one way times from destination to source.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.2011.10.8.3.1.11.1.29
h3cNqaStatResIpTargetAddress
This object represent the host address to be used at a remote host for performing a network analysis operation.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2011.10.8.3.1.11.1.3
h3cNqaStatResSumDelayDS
The sum of one way times from destination to source.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.10.8.3.1.11.1.30
h3cNqaStatResSum2DelayDS
The sum of squares of one way times from destination to source.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.10.8.3.1.11.1.31
h3cNqaStatResMinRtt
The minimum NQA probe round-trip-time (RTT) received. The value of 0 for this object implies that no RTT has been received.
columnmilliseconds SNMPv2-SMIGauge32.1.3.6.1.4.1.2011.10.8.3.1.11.1.4
h3cNqaStatResMaxRtt
The maximum NQA probe round-trip-time (RTT) received. The value of 0 for this object implies that no RTT has been received.
columnmilliseconds SNMPv2-SMIGauge32.1.3.6.1.4.1.2011.10.8.3.1.11.1.5
h3cNqaStatResAverageRtt
The average NQA probe round-trip-time (RTT).
columnmilliseconds SNMPv2-SMIGauge32.1.3.6.1.4.1.2011.10.8.3.1.11.1.6
h3cNqaStatResProbeResponses
The number of responses received. The value of this object MUST be reported as 0 when no probe responses have been received.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.10.8.3.1.11.1.7
h3cNqaStatResRttSumOfSquares
This object contains the sum of the squares for all NQA responses received. The value of this object MUST be reported as 0 when no NQA responses have been received.
columnmilliseconds SNMPv2-SMICounter32.1.3.6.1.4.1.2011.10.8.3.1.11.1.9