h3cNqaCtlFtpOperationType
H3C-NQA-MIB ·
.1.3.6.1.4.1.2011.10.8.3.1.2.1.8
Object
column
r/w
Enumeration
Ftp operation type.
Context
- MIB
- H3C-NQA-MIB
- OID
.1.3.6.1.4.1.2011.10.8.3.1.2.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- h3cNqaCtlEntry
- Table
- h3cNqaCtlTable
- Siblings
- 15
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | get |
2 | put |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| h3cNqaCtlTargetPort The destination port that may be used by udpEcho,
tcpConnect and jitter probes. | column | Integer32 | .1.3.6.1.4.1.2011.10.8.3.1.2.1.1 |
| h3cNqaCtlFtpPassword Ftp password. | column | OctetString | .1.3.6.1.4.1.2011.10.8.3.1.2.1.10 |
| h3cNqaCtlFtpOperationString Ftp operation string. If the ftp operation type is get,
the string must be the file name which will be gotten from ftp server. | column | OctetString | .1.3.6.1.4.1.2011.10.8.3.1.2.1.11 |
| h3cNqaCtlVPNInstance VPN name by which system finds route in the specified VPN
to send NQA probe packets. | column | OctetString | .1.3.6.1.4.1.2011.10.8.3.1.2.1.12 |
| h3cNqaCtlHistoryKeptTime To indicate how long the history records will be saved
in the pingProbeHistoryTable table after the test stopped. | column | minutes Integer32 | .1.3.6.1.4.1.2011.10.8.3.1.2.1.13 |
| h3cNqaCtlHistoryEnable To indicate whether the history should be recorded in the
PingProbeHistoryTable or not.
enabled(1) --history will be recorded
disabled(2) --history will not be recorded. | column | Enumeration | .1.3.6.1.4.1.2011.10.8.3.1.2.1.14 |
| h3cNqaCtlICPIFAdvFactor The advantage factor depends on the type of access and how the service
is to be used. This object will be used while calculating the ICPIF
(Calculated Planning Impairment Factor) … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.8.3.1.2.1.15 |
| h3cNqaCtlCodecType To indicate the codec type to be used with jitter probe. This is
applicable only for the jitter probe. | column | Enumeration | .1.3.6.1.4.1.2011.10.8.3.1.2.1.16 |
| h3cNqaCtlSourcePort The source port that may be used by all tests except
for dns and dlsw.
If no source port is specified, system will create
a random port as source port. | column | Integer32 | .1.3.6.1.4.1.2011.10.8.3.1.2.1.2 |
| h3cNqaCtlTTL Specifies the value to store in the TTL Field in the IP packet used to
encapsulate the NQA probe. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.8.3.1.2.1.3 |
| h3cNqaCtlJitterAdminInterval Time value in milliseconds that is an interval between two continuous
probes in jitter test.
This object is only used by jitter test. | column | milliseconds Integer32 | .1.3.6.1.4.1.2011.10.8.3.1.2.1.4 |
| h3cNqaCtlJitterAdminNumPackets Packet number that specifys how many packets will be sent in
one jitter test.
This object is only used by jitter test. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.8.3.1.2.1.5 |
| h3cNqaCtlHttpOperationType Http operation type: get, post or raw. | column | Enumeration | .1.3.6.1.4.1.2011.10.8.3.1.2.1.6 |
| h3cNqaCtlHttpOperationString Http operation string. For example, if the http operation type is get,
the string will be url, home page and http version. | column | OctetString | .1.3.6.1.4.1.2011.10.8.3.1.2.1.7 |
| h3cNqaCtlFtpUsername Ftp username. | column | OctetString | .1.3.6.1.4.1.2011.10.8.3.1.2.1.9 |