h3cIfOperStatus
H3C-IF-EXT-MIB ·
.1.3.6.1.4.1.2011.10.2.40.2.3.2.1.9
Object
column
Enumeration
Current status of the interface. In testing state, no operational packets can be forwarded. If ifAdminStatus is down, h3cIfOperStatus should be admindown. If ifAdminStatus is changed to up, h3cIfOperStatus should change to up if the interface is ready to send and receive network traffic; otherwise, it should stay in down state.
Context
- MIB
- H3C-IF-EXT-MIB
- OID
.1.3.6.1.4.1.2011.10.2.40.2.3.2.1.9- Type
- column
- Access
- readonly
- Status
- current
- Parent
- h3cIfEntry
- Table
- h3cIfTable
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | up |
2 | down |
3 | testing |
4 | admindown |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| h3cIfUpDownTimes The interface's up/down times, since the device was initialized. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.40.2.3.2.1.1 |
| h3cIfDownTimes Number of times the interface went down, since the device was initialized. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.40.2.3.2.1.10 |
| h3cIfPfcStatus Pfc (Priority-based Flow Control) status.
Forcibly enable Pfc by enable(1).
Disable Pfc by disable(2).
Set Pfc to auto mode by auto(3).
In auto mode, the local end automatic… | column | Enumeration | .1.3.6.1.4.1.2011.10.2.40.2.3.2.1.11 |
| h3cIfPfcDot1pNoDrop Pfc (Priority-based Flow Control) dot1q list,
bit 0 through bit 7 corresponding to priority 0 through priority 7.
See h3cIfPfcStatus. | column | Bits | .1.3.6.1.4.1.2011.10.2.40.2.3.2.1.12 |
| h3cIfDescription This object is also an 'alias' name for the interface specified by a
network manager, like the object of ifAlias. However, the size of
this object is larger than ifAlias. When t… | column | OctetString | .1.3.6.1.4.1.2011.10.2.40.2.3.2.1.13 |
| h3cIfFwdErrDiscards The number of packets that were discarded when being forwarded. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.10.2.40.2.3.2.1.14 |
| h3cIfMtu The size of the largest datagram that can be sent or received on the
interface, specified in octets. For interfaces that are used for
transmitting network datagram, this is the s… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.40.2.3.2.1.2 |
| h3cIfBandwidthRate The rate of the bandwidth for an interface. | column | Integer32 | .1.3.6.1.4.1.2011.10.2.40.2.3.2.1.3 |
| h3cIfDiscardPktRate The rate of the discarded packets for an interface. | column | Integer32 | .1.3.6.1.4.1.2011.10.2.40.2.3.2.1.4 |
| h3cIfStatusKeepTime The time since the interface
entered its current operational state. | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.2011.10.2.40.2.3.2.1.5 |
| h3cIfInNUcastPkts The number of non-unicast (i.e., subnetwork-
broadcast or subnetwork-multicast) packets
delivered to a higher-layer protocol. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2011.10.2.40.2.3.2.1.6 |
| h3cIfOutNUcastPkts The total number of packets that higher-level
protocols requested be transmitted to a non-
unicast (i.e., a subnetwork-broadcast or
subnetwork-multicast) address. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2011.10.2.40.2.3.2.1.7 |
| h3cIfIsPoe Whether the interface supports PoE. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.40.2.3.2.1.8 |