h3cEponUniVlanConfiguration

H3C-EPON-UNI-MIB · .1.3.6.1.4.1.2011.10.2.42.5.1.1.1.23
MIB view Table view

Object

column r/w OctetString 
The vlan configuration of the related vlan mode.
Transparent vlan mode: h3cEponUniVlanConfiguration is a
zero length string.
Tag vlan mode: the first four octets were the tag
assigned to untagged frames received on UNI, including TPID,
VID, CFI and priority.
Translation vlan mode: the first four octets were the old tag
(including TPID, VID, CFI and priority), which is replaced
by the new tag(including TPID, VID, CFI and priority),
the second four octets.
Doubletagged vlan mode: the first four octets were the tag
assigned to untagged or tagged frames received on UNI, including TPID,
VID, CFI and priority.
Vlantrunk vlan mode: the first four octets were the old tag
(including TPID, VID, CFI and priority), which is replaced
by the new tag(including TPID, VID, CFI and priority) of
the second four octets, the frames which assigned tag ranges from
the third four octets to fourth four octets were transmited freely
and so on for following octets.
Aggregation vlan mode: the first four octets were the old tag
(including TPID, VID, CFI and priority), which is replaced
by the new tag(including TPID, VID, CFI and priority) of
the second four octets, the frames which assigned tag ranges from
the third four octets to fourth four octets(using low two octets as vlan tag)
were replaced by the new tag(using high two octets as target vlan tag)
and so on for following octets.

Context

MIB
H3C-EPON-UNI-MIB
OID
.1.3.6.1.4.1.2011.10.2.42.5.1.1.1.23
Type
column
Access
readwrite
Status
current
Parent
h3cEponUniSysManEntry
Table
h3cEponUniSysManTable
Siblings
34

Syntax

OctetString

Values & Constraints

Object Constraints
range: 0-255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
h3cEponUniIndex
The index value which uniquely identifies the FE(fast Ethernet) interface of the ONU.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.10.2.42.5.1.1.1.1
h3cEponUniVLANTrunkAllowListHigh
Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Wit…
columnOctetString.1.3.6.1.4.1.2011.10.2.42.5.1.1.1.10
h3cEponUniInboundLineRate
The value of the inbound line-rate. measured with kbps. The upper limit of the line-rate is the value of h3cEponUniLineRateMax in the entry. It must be multiple of the value of …
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.10.2.42.5.1.1.1.11
h3cEponUniOutboundLineRate
The value of the outbound line-rate. measured with kbps. The upper limit of the line-rate is the value of h3cEponUniLineRateMax in the entry. It must be multiple of the value of …
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.10.2.42.5.1.1.1.12
h3cEponUniFlowControl
Flow control status. true(1) - Flow control status enable. false(2) - Flow control status disable.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.10.2.42.5.1.1.1.13
h3cEponUniSpeed
User network interface speed.
columnEnumeration.1.3.6.1.4.1.2011.10.2.42.5.1.1.1.14
h3cEponUniDuplex
User network interface mode.
columnEnumeration.1.3.6.1.4.1.2011.10.2.42.5.1.1.1.15
h3cEponUniVlanVPNStatus
vlan VPN status. true(1) - vlan VPN status enable. false(2) - vlan VPN disable.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.10.2.42.5.1.1.1.16
h3cEponUniCountReset
Reset the counter which is about packets of the interface, then the counter will change to zero. There is no sense in reading this object.
columnEnumeration.1.3.6.1.4.1.2011.10.2.42.5.1.1.1.17
h3cEponUniPortIsolate
enable - enable UNI port isolate setting. disable - disable UNI port isolate setting.
columnEnumeration.1.3.6.1.4.1.2011.10.2.42.5.1.1.1.18
h3cEponUniDescr
A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the interface hardware a…
columnOctetString.1.3.6.1.4.1.2011.10.2.42.5.1.1.1.2
h3cEponUniAutoNegotiation
enable - enable auto negotiation. disable - disable auto negotiation.
columnEnumeration.1.3.6.1.4.1.2011.10.2.42.5.1.1.1.25
h3cEponUniRestartAutoNeg
Force to restart the auto negotiation process.
columnEnumeration.1.3.6.1.4.1.2011.10.2.42.5.1.1.1.26
h3cEponUniLinkStatus
The link status of UNI.
columnEnumeration.1.3.6.1.4.1.2011.10.2.42.5.1.1.1.29
h3cEponUniAdminStatus
The desired state of the user network interface. When a managed system initializes, all user network interfaces start with down(2) state. The testing(3)state indicates that no ope…
columnEnumeration.1.3.6.1.4.1.2011.10.2.42.5.1.1.1.3
h3cEponUniInterfaceType
UNI interface type.
columnEnumeration.1.3.6.1.4.1.2011.10.2.42.5.1.1.1.30
h3cEponUniVitualCableTest
True(1): Virtual cable test enable. False(2): Virtual cable test disable.
columnEnumeration.1.3.6.1.4.1.2011.10.2.42.5.1.1.1.31
h3cEponUniVCTCableStatus
Get the cable status. Normal(1),cable is normal. Abnormal(2),cable is abnormal. AbnormalOpen(3),cable is abnormal because of open circuit. AbnormalShort(4),cable is abnormal becau…
columnEnumeration.1.3.6.1.4.1.2011.10.2.42.5.1.1.1.32
h3cEponUniVCTCableLength
Get the cable length. When h3cEponUniVCTCableStatus is normal, the node stands for the length from the UNI port to the port opposite. When h3cEponUniVCTCableStatus is abnormal, it…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.10.2.42.5.1.1.1.33
h3cEponUniVCTImpedanceMismatch
Get the cable impedance. Not-support(1),the UNI port does not support this function. True(2),impedance match. False(3),impedance mismatch.
columnEnumeration.1.3.6.1.4.1.2011.10.2.42.5.1.1.1.34
h3cEponUniVCTPairSkew
Get the symmetry of cable. If the function is not supported, the default value 0 will be returned. Unit:nanosecond(ns).
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.10.2.42.5.1.1.1.35
h3cEponUniVCTPairSwap
NotSupport(1),the UNI port does not support this function. True(2),pair swap. False(3),not pair swap.
columnEnumeration.1.3.6.1.4.1.2011.10.2.42.5.1.1.1.36
h3cEponUniVCTPolaritySwap
NotSupport(1),the UNI port does not support this function. True(2),polarity swap. False(3),not polarity swap.
columnEnumeration.1.3.6.1.4.1.2011.10.2.42.5.1.1.1.37
h3cEponUniVCTInsertionLoss
If the function is not supported, the default value 0 will be returned. Unit:decibel(db).
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.10.2.42.5.1.1.1.38
h3cEponUniVCTReturnLoss
If the function is not supported, the default value 0 will be returned. Unit:decibel(db).
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.10.2.42.5.1.1.1.39
h3cEponUniMdi
Type of the line connected to UNI interface: mdi-ii(straight-through cable), mdi-x (crossover cable), mdi-auto (auto-sensing).
columnEnumeration.1.3.6.1.4.1.2011.10.2.42.5.1.1.1.4
h3cEponUniVCTNearendCrosstalk
If the function is not supported, the default value 0 will be returned. Unit:decibel(db).
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.10.2.42.5.1.1.1.40
h3cEponUniVlan
If the function is not supported, the default value 0 will be returned. Unit:decibel(db).
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.10.2.42.5.1.1.1.41
h3cEponUniMacMax
The maximum number of MAC addresses that the UNI port can learn. no-limit(65535) others(0~65534)
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.10.2.42.5.1.1.1.42
h3cEponUniPriority
The priority of user network interface. If the value is larger, the priority will be higher.
columnInteger32.1.3.6.1.4.1.2011.10.2.42.5.1.1.1.5
h3cEponUniVlanType
UNI vlan types.
columnEnumeration.1.3.6.1.4.1.2011.10.2.42.5.1.1.1.6
h3cEponUniAccessVlan
The vlan ID assigned to untagged frames or Priority-Tagged frames received on user network interface.
columnInteger32.1.3.6.1.4.1.2011.10.2.42.5.1.1.1.7
h3cEponUniTrunkPvid
PVID(port vlan ID), the vlan ID assigned to untagged frames or Priority-Tagged frames received on user network interface.
columnInteger32.1.3.6.1.4.1.2011.10.2.42.5.1.1.1.8
h3cEponUniVLANTrunkAllowListLow
Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each o…
columnOctetString.1.3.6.1.4.1.2011.10.2.42.5.1.1.1.9