h3cDot11ServicePolicyID
H3C-DOT11-CFG-MIB ·
.1.3.6.1.4.1.2011.10.2.75.4.2.2.1.1
Object
column
H3C-DOT11-REF-MIBH3cDot11ServicePolicyIDType
Represents the ID of each service policy.
Context
- MIB
- H3C-DOT11-CFG-MIB
- OID
.1.3.6.1.4.1.2011.10.2.75.4.2.2.1.1- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- h3cDot11ServicePolicyEntry
- Table
- h3cDot11ServicePolicyTable
- Siblings
- 32
Syntax
H3C-DOT11-REF-MIBH3cDot11ServicePolicyIDType
- Source
- H3C-DOT11-REF-MIBH3cDot11ServicePolicyIDType
- Base type
Integer32
Values & Constraints
Object Constraints
range: 0-31
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| h3cDot11SPInCirMode CIR(committed information rate) mode of inbound direction.
This object is useful only when the corresponding CIR is nonzero.
If value of this object is changed, corresponding CIR … | column | H3C-DOT11-REF-MIBH3cDot11CirMode | .1.3.6.1.4.1.2011.10.2.75.4.2.2.1.10 |
| h3cDot11SPInCirValue Represents the CIR of inbound direction of this service policy.
If the value is 0, it means that no flow control is applied to
the service policy, and the corresponding CIR mode i… | column | Kbps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.75.4.2.2.1.11 |
| h3cDot11SPOutCirMode CIR(committed information rate) mode of outbound direction.
This object is useful only when the corresponding CIR is nonzero.
If value of this object is changed, corresponding CIR… | column | H3C-DOT11-REF-MIBH3cDot11CirMode | .1.3.6.1.4.1.2011.10.2.75.4.2.2.1.12 |
| h3cDot11SPOutCirValue Represents the CIR of outbound direction of this service policy.
If the value is 0, it means that no flow control is applied to
the service policy, and the corresponding CIR mode … | column | Kbps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.75.4.2.2.1.13 |
| h3cDot11WlanInfPVID Represents the VLAN ID of SSID. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.75.4.2.2.1.14 |
| h3cDot11SPInCirStaticValue Represents the CIR of inbound direction for static CIR mode. | column | Kbps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.75.4.2.2.1.15 |
| h3cDot11SPOutCirStaticValue Represents the CIR of outbound direction for static CIR mode. | column | Kbps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.75.4.2.2.1.16 |
| h3cDot11SPIsolate If it is true, then stations connected with the service policy are
isolated. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.75.4.2.2.1.17 |
| h3cDot11WlanexAuthServerIP Represents the IP address of the Wlanex Authentication server | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.10.2.75.4.2.2.1.18 |
| h3cDot11SPBeaconMeasEnable If it is true, then beacon-measurement is enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.75.4.2.2.1.19 |
| h3cDot11SSIDName Represents the ESS. As per CLI, the value of
service policy name will be SSID. | column | H3C-DOT11-REF-MIBH3cDot11SSIDStringType | .1.3.6.1.4.1.2011.10.2.75.4.2.2.1.2 |
| h3cDot11SPBeaconMeasType Represents what the work mode for BeaconMeasurement type.
The following values are supported:
passive, - BeaconMeasurement will use the passive type.
active - BeaconMe… | column | Enumeration | .1.3.6.1.4.1.2011.10.2.75.4.2.2.1.20 |
| h3cDot11SPBeaconMeasInterval Represents the beacon-measurement interval. | column | second Integer32 | .1.3.6.1.4.1.2011.10.2.75.4.2.2.1.21 |
| h3cDot11AuthenModeCM Represents the Authentication mode defined by 802.11. | column | Enumeration | .1.3.6.1.4.1.2011.10.2.75.4.2.2.1.22 |
| h3cDot11SecIEStatusCM To enable the security Information element in the beacon and
probe response frames sent by AP. | column | Enumeration | .1.3.6.1.4.1.2011.10.2.75.4.2.2.1.23 |
| h3cDot11SecurityCiphersCM The WLAN system support the following cipher type for data frame
encryption.
none
wep40
wep104
tkip
aesccmp
wpi-SMS4
When the value of node equals to zero, it means no configurati… | column | Enumeration | .1.3.6.1.4.1.2011.10.2.75.4.2.2.1.24 |
| h3cDot11SrvPolicyStatusCM The status of the Service Policy. | column | Enumeration | .1.3.6.1.4.1.2011.10.2.75.4.2.2.1.25 |
| h3cDot11SSIDHiddenCM This attribute controls whether the SSID will be advertised in
beacon frames.
If it is dot11true, the SSID will not be advertised in beacon
frames. | column | H3C-DOT11-REF-MIBH3cDot11TruthValueCM | .1.3.6.1.4.1.2011.10.2.75.4.2.2.1.26 |
| h3cDot11SPIsolateCM If it is dot11true, the clients connected with the service policy are
isolated to each other. | column | H3C-DOT11-REF-MIBH3cDot11TruthValueCM | .1.3.6.1.4.1.2011.10.2.75.4.2.2.1.27 |
| h3cDot11FwdVlanBitMapLow Each octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 1 through 8,
the second octet specifying VLANs 9 through 16, etc.
Within each oc… | column | OctetString | .1.3.6.1.4.1.2011.10.2.75.4.2.2.1.28 |
| h3cDot11FwdVlanBitMapHigh Each octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 1 through 8,
the second octet specifying VLANs 9 through 16, etc.
Within each oc… | column | OctetString | .1.3.6.1.4.1.2011.10.2.75.4.2.2.1.29 |
| h3cDot11SSIDHidden This attribute controls whether the SSID will be advertised in
the beacon frame.
If it is true, then SSID will not be advertised in the beacon
frame. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.75.4.2.2.1.3 |
| h3cDot11ServicePolicyName Represents the name of each service policy. | column | OctetString | .1.3.6.1.4.1.2011.10.2.75.4.2.2.1.30 |
| h3cDot11SecurityModeCM Determines the security modes of the WLAN port.
none - The default value. No security mode is set.
psk - Access to the port is denied until the por… | column | Enumeration | .1.3.6.1.4.1.2011.10.2.75.4.2.2.1.31 |
| h3cDot11SPInCbsValue Represents the CBS of inbound direction of this service policy.
If the value is 0, it means that the CBS is automatically calculated
from the value of CIR. | column | byte SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.75.4.2.2.1.32 |
| h3cDot11SPOutCbsValue Represents the CBS of outbound direction of this service policy.
If the value is 0, it means that the CBS is automatically calculated
from the value of CIR. | column | byte SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.75.4.2.2.1.33 |
| h3cDot11AuthenMode Represents the Authentication mode defined by 802.11. | column | H3C-DOT11-REF-MIBH3cDot11AuthenType | .1.3.6.1.4.1.2011.10.2.75.4.2.2.1.4 |
| h3cDot11SSIDEncryptionMode Represents the encryption mode for this ESS. | column | H3C-DOT11-REF-MIBH3cDot11SSIDEncryptModeType | .1.3.6.1.4.1.2011.10.2.75.4.2.2.1.5 |
| h3cDot11WlanInfBindingType Represents the service policy will bind to what kind of
data forwarding interface. | column | OctetString | .1.3.6.1.4.1.2011.10.2.75.4.2.2.1.6 |
| h3cDot11WlanInfBindingID Represents the interface ID of the interface that ESS will
bind to.
If the value is set to -1, the binding will be removed. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.75.4.2.2.1.7 |
| h3cDot11SrvPolicyRowStatus The status of this table entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.10.2.75.4.2.2.1.8 |
| h3cDot11ClientMaxCount Represent the maximum number of stations supported by
this service policy. | column | Integer32 | .1.3.6.1.4.1.2011.10.2.75.4.2.2.1.9 |