h3cDot11RadioCfgChannel
H3C-DOT11-CFG-MIB ·
.1.3.6.1.4.1.2011.10.2.75.4.4.1.1.10
Object
Represents the channel allocation of radio.
Context
- MIB
- H3C-DOT11-CFG-MIB
- OID
.1.3.6.1.4.1.2011.10.2.75.4.4.1.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- h3cDot11RadioIntfConfigEntry
- Table
- h3cDot11RadioIntfConfigTable
- Siblings
- 15
Syntax
H3C-DOT11-REF-MIBH3cDot11ChannelScopeType
- Source
- H3C-DOT11-REF-MIBH3cDot11ChannelScopeType
- Base type
Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| h3cDot11RadioIfIdx Represents the Radio IfIndex of radio in AP. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.75.4.4.1.1.1 |
| h3cDot11RadioCfgMaxTxPwrLvl Represents the maximal transmit power scope for AP. | column | dbm H3C-DOT11-REF-MIBH3cDot11TxPwrLevelScopeType | .1.3.6.1.4.1.2011.10.2.75.4.4.1.1.11 |
| h3cDot11RadioCfgPreambleLen Represents whether use long or short preamble for 802.11 MAC
frame. | column | H3C-DOT11-REF-MIBH3cDot11PreambleType | .1.3.6.1.4.1.2011.10.2.75.4.4.1.1.12 |
| h3cDot11RadioCfgWorkMode Represents work mode of the radio. | column | H3C-DOT11-REF-MIBH3cDot11WorkMode | .1.3.6.1.4.1.2011.10.2.75.4.4.1.1.13 |
| h3cDot11RadioCfgOnly11gEnable Represents whether enable only 802.11g radio mode or not.
'true' : Only 802.11g radio mode is enabled.
'false': Only 802.11g radio mode is disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.75.4.4.1.1.14 |
| h3cDot11RadioCfgType2 Represents the radio will work with which 802.11 radio type. | column | H3C-DOT11-REF-MIBH3cDot11RadioType2 | .1.3.6.1.4.1.2011.10.2.75.4.4.1.1.15 |
| h3cDot11RadioCfgRssithresholdCM Represents the minimum value of the RSSI.
The clients with RSSI below this value will be refused to associate. | column | dBm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.75.4.4.1.1.16 |
| h3cDot11RadioCfgBeaconIntvl Represents the interval for Beacon management frame. | column | TU SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.75.4.4.1.1.2 |
| h3cDot11RadioCfgDtimIntvl Represents the number of beacon intervals that shall elapse
between transmission of Beacons frames containing a Traffic
Indication Map (TIM) element whose DTIM Count field is 0.
T… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.75.4.4.1.1.3 |
| h3cDot11RadioCfgRtsThreshold Represents the current minimum size,in octets,of the MAC
protocol data unit (MPDU), below which a Request to send/Clear
to send (RTS/CTS) handshake shall not be performed. | column | Byte SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.75.4.4.1.1.4 |
| h3cDot11RadioCfgFragThreshold Represents the current maximum size, in octets, of the MPDU that
may be delivered to the PHY. A MSDU shall be broken into
fragments if its size exceeds the value of this attribut… | column | Byte SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.75.4.4.1.1.5 |
| h3cDot11RadioCfgShtRetryThld Represents the maximum number of transmission attempts of a
frame, the length of which is less than or equal to
h3cDot11RadioRTSThreshold, that shall be made before a failure
cond… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.75.4.4.1.1.6 |
| h3cDot11RadioCfglongRtrThld Represents the maximum number of transmission attempts of a
frame, the length of which is longer than
h3cDot11RadioRTSThreshold, that shall be made before a
failure condition is i… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.75.4.4.1.1.7 |
| h3cDot11RadioCfgMaxRxLifetime Represents the elapsed time. After the time specified by
h3cDot11RadioCfgMaxRxLifetime, the further attempts to reassemble
the MSDU shall be terminated. | column | millisecond SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.10.2.75.4.4.1.1.8 |
| h3cDot11RadioCfgType Represents the radio will work with which 802.11 radio type. | column | H3C-DOT11-REF-MIBH3cDot11RadioType | .1.3.6.1.4.1.2011.10.2.75.4.4.1.1.9 |