h3cDot11APControlAddressState
H3C-DOT11-CFG-MIB ·
.1.3.6.1.4.1.2011.10.2.75.4.3.1.1.24
Object
column
r/w
Enumeration
Represents the status of control address for an AP. The following values are supported: enable - AC rediscovery will be enabled. disable - AC rediscovery will be disabled.
Context
- MIB
- H3C-DOT11-CFG-MIB
- OID
.1.3.6.1.4.1.2011.10.2.75.4.3.1.1.24- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- h3cDot11APTemplateEntry
- Table
- h3cDot11APTemplateTable
- Siblings
- 27
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| h3cDot11APTemplateName Represents the name of AP template. | column | OctetString | .1.3.6.1.4.1.2011.10.2.75.4.3.1.1.1 |
| h3cDot11StaIdleTimerInterv Represents the interval for which the link between AP and STA
( power-save or awake ) can be idle. | column | second SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.75.4.3.1.1.10 |
| h3cDot11StaKeepAliveTimerInterv Represents the interval of the keep alive requests sent between
AP and STA. | column | second SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.75.4.3.1.1.11 |
| h3cDot11APCir Represents the committed information rate between AP and AC. | column | Kbps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.75.4.3.1.1.12 |
| h3cDot11APCbs Represents the committed burst size between AP and AC. | column | Bytes SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.75.4.3.1.1.13 |
| h3cDot11APPriorityLevel This object represents the connection priority for the AP.
If the connection priority is 7, the AC is considered as the
primary AC for the AP. | column | Integer32 | .1.3.6.1.4.1.2011.10.2.75.4.3.1.1.14 |
| h3cDot11APElementID This object represents the AP element ID. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.75.4.3.1.1.15 |
| h3cDot11APDevDetectEnable Represents whether device detection is enabled or not.
'true' : Device detection is enabled.
'false': Device detection is disabled.
If device detection is enabled, the AP will pro… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.75.4.3.1.1.16 |
| h3cDot11APGetIPMethod This object represents the method how AP gets IP address. | column | Enumeration | .1.3.6.1.4.1.2011.10.2.75.4.3.1.1.17 |
| h3cDot11StatisIntervMode This object represents the mode of statics interval.
normal - statics interval value between 10s to 120s
realtime - statics interval value between 2s to 5s | column | Enumeration | .1.3.6.1.4.1.2011.10.2.75.4.3.1.1.18 |
| h3cDot11ApTrapEnabled Represents whether the trap status is enabled or not.
'true' : Enable the trap status;
'false' : Disable the trap status. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.75.4.3.1.1.19 |
| h3cDot11APSerialID Represents AP serial id. | column | OctetString | .1.3.6.1.4.1.2011.10.2.75.4.3.1.1.2 |
| h3cDot11ApFmwUpdState Represents the status of version auto-update for an AP.
The following values are supported:
enable - AP version will be updated automatically.
disable - AP version will not be … | column | Enumeration | .1.3.6.1.4.1.2011.10.2.75.4.3.1.1.20 |
| h3cDot11StatisIntervModeCM This object represents the mode of statistic interval.
off - statistic interval value between 10s to 120s
on - statistic interval value between 2s to 5s | column | Enumeration | .1.3.6.1.4.1.2011.10.2.75.4.3.1.1.21 |
| h3cDot11ApNasIDCM Represents the NAS-ID of current service policy for each
specific radio of AP. | column | OctetString | .1.3.6.1.4.1.2011.10.2.75.4.3.1.1.22 |
| h3cDot11ApCoveragetype This object represents the coverage type of AP.
school - the coverage type is school
traffic - the coverage type is traffic
shop - the coverage type is shop
company - the coverage… | column | Enumeration | .1.3.6.1.4.1.2011.10.2.75.4.3.1.1.23 |
| h3cDot11APControlAddressIPv4 Represents an AC IPv4 address for AC rediscovery. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.10.2.75.4.3.1.1.25 |
| h3cDot11APControlAddressIPv6 Represents an AC IPv6 address for AC rediscovery. | column | OctetString | .1.3.6.1.4.1.2011.10.2.75.4.3.1.1.26 |
| h3cDot11APLocalACName Represents the local AC name the AP belongs to. | column | OctetString | .1.3.6.1.4.1.2011.10.2.75.4.3.1.1.27 |
| h3cDot11APEchoInterval This object represents the echo-interval of the AP. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.75.4.3.1.1.28 |
| h3cDot11TemplateAPModelAlias Represents the alias of AP model name. | column | OctetString | .1.3.6.1.4.1.2011.10.2.75.4.3.1.1.3 |
| h3cDot11Description This attribute will give more information about AP.
Administrator could suggest the location, owner or
other information for each AP.
If the value is set to NULL, the description … | column | OctetString | .1.3.6.1.4.1.2011.10.2.75.4.3.1.1.4 |
| h3cDot11APWorkMode Represents what work mode for AP.
The following values are supported:
normal - AP will supply WLAN service.
monitor - AP will be a monitor to find attack.
hybrid - A… | column | Enumeration | .1.3.6.1.4.1.2011.10.2.75.4.3.1.1.5 |
| h3cDot11APTemplateRowStatus The status of this table entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.10.2.75.4.3.1.1.6 |
| h3cDot11APName Represents the AP name. | column | OctetString | .1.3.6.1.4.1.2011.10.2.75.4.3.1.1.7 |
| h3cDot11StatisInterv Represents the interval of radio statistic. | column | second SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.75.4.3.1.1.8 |
| h3cDot11APBroadcastProbeReply Represents enable the AP to reply broadcast probe or not.
'true' : The AP to reply broadcast probe is enabled.
'false': The AP to reply broadcast probe is disabled | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.75.4.3.1.1.9 |