h3cDot11Channel
H3C-DOT11-APMT-MIB ·
.1.3.6.1.4.1.2011.10.2.75.2.1.3.1.5
Object
column
H3C-DOT11-REF-MIBH3cDot11ChannelScopeType
Represents the current channel allocation for radio.
Context
- MIB
- H3C-DOT11-APMT-MIB
- OID
.1.3.6.1.4.1.2011.10.2.75.2.1.3.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- h3cDot11APRadioEntry
- Table
- h3cDot11APRadioTable
- Siblings
- 28
Syntax
H3C-DOT11-REF-MIBH3cDot11ChannelScopeType
- Source
- H3C-DOT11-REF-MIBH3cDot11ChannelScopeType
- Base type
Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| h3cDot11CurAPID To uniquely identify a AP in running status. | column | OctetString | .1.3.6.1.4.1.2011.10.2.75.2.1.3.1.1 |
| h3cDot11ResourceUseRatio Represents the ratio of radio resource usage. | column | onepercent SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.75.2.1.3.1.10 |
| h3cDot11RadioModeSupport Represents radio type supported by the radio.
The WLAN system supports the following possible radio type:
dot11a(1),
dot11b(2),
dot11g(4),
dot11gn(16),
dot11an(32),
dot11ac(64),
d… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.10.2.75.2.1.3.1.11 |
| h3cDot11TxPowerLevel2 The TxPowerLevel N currently being used to transmit data. | column | Integer32 | .1.3.6.1.4.1.2011.10.2.75.2.1.3.1.12 |
| h3cDot11PowerMgmtStatus Represents status of power management of the radio. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.75.2.1.3.1.13 |
| h3cDot11ChannelSwitchTimes Represents the channel switch times. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.10.2.75.2.1.3.1.14 |
| h3cDot11AntennaType Represents type of the antenna which radio used. | column | OctetString | .1.3.6.1.4.1.2011.10.2.75.2.1.3.1.15 |
| h3cDot11DiversitySelectionRx Represents the diversity selection received. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.75.2.1.3.1.16 |
| h3cDot11MaxTxPwrLvl Represents the maximum transmit power. | column | OctetString | .1.3.6.1.4.1.2011.10.2.75.2.1.3.1.17 |
| h3cDot11PwrAttRange Represents the range of power attenuation. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.75.2.1.3.1.18 |
| h3cDot11AvgRxSignalStrength Represents the average received signal strength. | column | dBm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.75.2.1.3.1.19 |
| h3cDot11RadioID Represents each radio. | column | Integer32 | .1.3.6.1.4.1.2011.10.2.75.2.1.3.1.2 |
| h3cDot11HighestRxSignalStrength Represents the highest received signal strength. | column | dBm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.75.2.1.3.1.20 |
| h3cDot11LowestRxSignalStrength Represents the lowest received signal strength. | column | dBm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.75.2.1.3.1.21 |
| h3cDot11RadioIfUpdownTimes Represents the up/down times on radio interface. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.10.2.75.2.1.3.1.22 |
| h3cDot11RadioIfLastChange Represents time at last change that occurred on radio interface. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2011.10.2.75.2.1.3.1.23 |
| h3cDot11RadioModeSupport2 Represents radio type supported by the radio.
The WLAN system supports the following possible radio type:
dot11a(1),
dot11b(2),
dot11g(4),
dot11an(8),
dot11gn(16),
dot11gac(32),
d… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.10.2.75.2.1.3.1.24 |
| h3cDot11OperStatusCM Represents the operational status of radio. | column | Enumeration | .1.3.6.1.4.1.2011.10.2.75.2.1.3.1.25 |
| h3cDot11AirPrimChnlBusy Represents air interface utilization on the primary channel.
The value 255 represents an invalid value. | column | Integer32 | .1.3.6.1.4.1.2011.10.2.75.2.1.3.1.26 |
| h3cDot11AirPrimChnlTxBusy Represents air interface utilization for signal sending on the
primary channel.
The value 255 represents an invalid value. | column | Integer32 | .1.3.6.1.4.1.2011.10.2.75.2.1.3.1.27 |
| h3cDot11AirPrimChnlRxBusy Represents air interface utilization for signal receiving on the
primary channel.
The value 255 represents an invalid value. | column | Integer32 | .1.3.6.1.4.1.2011.10.2.75.2.1.3.1.28 |
| h3cDot11AirExtChnlBusy Represents air interface utilization on the secondary channel.
The value 255 represents an invalid value. | column | Integer32 | .1.3.6.1.4.1.2011.10.2.75.2.1.3.1.29 |
| h3cDot11AdminStatus Represents the administrator status of radio. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.75.2.1.3.1.3 |
| h3cDot11OperStatus Represents the operational status of radio. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.75.2.1.3.1.4 |
| h3cDot11TxPowerLevel Represents the current transmit power level for radio. | column | dbm H3C-DOT11-REF-MIBH3cDot11TxPwrLevelScopeType | .1.3.6.1.4.1.2011.10.2.75.2.1.3.1.6 |
| h3cDot11APRadioIfIndex Represents the interface index for the radio. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.75.2.1.3.1.7 |
| h3cDot11AntennaGain Represents the current gain for antenna. | column | dBi SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.75.2.1.3.1.8 |
| h3cDot11MaxBandwidth Represents the maximum bandwidth for the radio. | column | Mbps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.75.2.1.3.1.9 |