gsmpSwitchPartitionId
GSMP-MIB ·
.1.3.6.1.2.1.98.1.2.1.8
Object
column
r/w
GsmpPartitionIdType
The Id for this specific switch partition that the switch entity represents. If partitions are not used, i.e. Partition Type = noPartition(1), then this object is undefined.
Context
- MIB
- GSMP-MIB
- OID
.1.3.6.1.2.1.98.1.2.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- gsmpSwitchEntry
- Table
- gsmpSwitchTable
- Siblings
- 13
Syntax
GsmpPartitionIdType
- Source
- GsmpPartitionIdType
- Base type
OctetString
Values & Constraints
Type Constraints
range: 1
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| gsmpSwitchEntityId The Switch Entity Id is unique
within the operational context of the device. | column | GsmpNameType | .1.3.6.1.2.1.98.1.2.1.1 |
| gsmpSwitchSwitchType A 16-bit field allocated by the manufacturer
of the switch. The Switch Type
identifies the product. When the Switch Type is combined
with the OUI from the Switch Name the product … | column | OctetString | .1.3.6.1.2.1.98.1.2.1.10 |
| gsmpSwitchWindowSize The maximum number of unacknowledged request messages
that may be transmitted by the controller without the
possibility of loss. This field is used to prevent
request messages fro… | column | Unsigned32 | .1.3.6.1.2.1.98.1.2.1.11 |
| gsmpSwitchSessionState The state for the existing or potential session that
this entity is concerned with.
The NULL state is returned if the proper encapsulation
data is not yet configured, if the row i… | column | Enumeration | .1.3.6.1.2.1.98.1.2.1.12 |
| gsmpSwitchStorageType The storage type for this switch entity.
Conceptual rows having the value 'permanent' need not allow
write-access to any columnar objects in the row. | column | SNMPv2-TCStorageType | .1.3.6.1.2.1.98.1.2.1.13 |
| gsmpSwitchRowStatus An object that allows entries in this table to
be created and deleted using the
RowStatus convention.
While the row is in active state it's not
possible to modify the value of any… | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.98.1.2.1.14 |
| gsmpSwitchMaxVersion The max version number of the GSMP protocol being
supported by this Switch. The version is negotiated by
the adjacency protocol. | column | GsmpVersion | .1.3.6.1.2.1.98.1.2.1.2 |
| gsmpSwitchTimer The timer specifies the nominal time between
periodic adjacency protocol messages. It is a constant
for the duration of a GSMP session. The timer is
specified in units of 100ms. | column | 100ms Unsigned32 | .1.3.6.1.2.1.98.1.2.1.3 |
| gsmpSwitchName The name of the Switch. The first three octets must be an
Organisationally Unique Identifier (OUI) that identifies
the manufacturer of the Switch. This is by default set to
the sa… | column | GsmpNameType | .1.3.6.1.2.1.98.1.2.1.4 |
| gsmpSwitchPort The local port number for this Switch Entity. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.98.1.2.1.5 |
| gsmpSwitchInstance The instance number for the Switch Entity.
The Instance number is a 24-bit number
that should be guaranteed to be unique within
the recent past and to change when the link
or node… | column | Unsigned32 | .1.3.6.1.2.1.98.1.2.1.6 |
| gsmpSwitchPartitionType A switch can assign the specific partition identifier to
the session by setting the Partition Type to
fixedPartitionAssigned(3). A switch can specify
that no partitions are handle… | column | GsmpPartitionType | .1.3.6.1.2.1.98.1.2.1.7 |
| gsmpSwitchNotificationMap This bitmap defines whether a corresponding SNMP
notification should be sent if an GSMP event is sent
by the Switch Entity. If the bit is set to 1 a
notification should be sent. T… | column | Bits | .1.3.6.1.2.1.98.1.2.1.9 |