gmplsTunnelDirection
GMPLS-TE-STD-MIB ·
.1.3.6.1.2.1.10.166.13.2.1.1.8
Object
column
r/w
Enumeration
Whether this tunnel carries forward data only (is
unidirectional) or is bidirectional.
Values of this object other than 'forward' are meaningful
only if gmplsTunnelLSPEncoding is not set to
'tunnelLspNotGmpls'.
Context
- MIB
- GMPLS-TE-STD-MIB
- OID
.1.3.6.1.2.1.10.166.13.2.1.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- gmplsTunnelEntry
- Table
- gmplsTunnelTable
- Siblings
- 18
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | forward |
1 | bidirectional |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| gmplsTunnelUnnumIf Denotes whether or not this tunnel corresponds to an unnumbered
interface represented by an entry in the interfaces group table
(the ifTable) with ifType set to mpls(166).
… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.10.166.13.2.1.1.1 |
| gmplsTunnelUpstreamNotifyRecipientType This object is used to aid in interpretation of
gmplsTunnelUpstreamNotifyRecipient. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.2.1.10.166.13.2.1.1.10 |
| gmplsTunnelUpstreamNotifyRecipient Indicates the address of the upstream recipient for Notify
messages relating to this tunnel and issued by this LSR. This
information is typically received from an upstream LSR in… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.10.166.13.2.1.1.11 |
| gmplsTunnelSendResvNotifyRecipientType This object is used to aid in interpretation of
gmplsTunnelSendResvNotifyRecipient. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.2.1.10.166.13.2.1.1.12 |
| gmplsTunnelSendResvNotifyRecipient Indicates to an upstream LSR the address to which it should send
downstream Notify messages relating to this tunnel.
This object is only valid when signaling a tunn… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.10.166.13.2.1.1.13 |
| gmplsTunnelDownstreamNotifyRecipientType This object is used to aid in interpretation of
gmplsTunnelDownstreamNotifyRecipient. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.2.1.10.166.13.2.1.1.14 |
| gmplsTunnelDownstreamNotifyRecipient Indicates the address of the downstream recipient for Notify
messages relating to this tunnel and issued by this LSR. This
information is typically received from an upstream LSR … | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.10.166.13.2.1.1.15 |
| gmplsTunnelSendPathNotifyRecipientType This object is used to aid in interpretation of
gmplsTunnelSendPathNotifyRecipient. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.2.1.10.166.13.2.1.1.16 |
| gmplsTunnelSendPathNotifyRecipient Indicates to a downstream LSR the address to which it should
send upstream Notify messages relating to this tunnel.
This object is only valid when signaling a tunne… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.10.166.13.2.1.1.17 |
| gmplsTunnelAdminStatusFlags Determines the setting of the Admin Status flags in the
Admin Status object or TLV, as described in RFC 3471. Setting
this field to a non-zero value will result in the inclusion … | column | IANA-GMPLS-TC-MIBIANAGmplsAdminStatusInformationTC | .1.3.6.1.2.1.10.166.13.2.1.1.18 |
| gmplsTunnelExtraParamsPtr Some tunnels will run over transports that can usefully support
technology-specific additional parameters (for example,
Synchronous Optical Network (SONET) resource usage). Such
… | column | SNMPv2-TCRowPointer | .1.3.6.1.2.1.10.166.13.2.1.1.19 |
| gmplsTunnelAttributes This bitmask indicates optional parameters for this tunnel.
These bits should be taken in addition to those defined in
mplsTunnelSessionAttributes in order to determine the full s… | column | Bits | .1.3.6.1.2.1.10.166.13.2.1.1.2 |
| gmplsTunnelLSPEncoding This object indicates the encoding of the LSP being requested.
A value of 'tunnelLspNotGmpls' indicates that GMPLS signaling is
not in use. Some objects in this MI… | column | IANA-GMPLS-TC-MIBIANAGmplsLSPEncodingTypeTC | .1.3.6.1.2.1.10.166.13.2.1.1.3 |
| gmplsTunnelSwitchingType Indicates the type of switching that should be performed on
a particular link. This field is needed for links that
advertise more than one type of switching capability.
… | column | IANA-GMPLS-TC-MIBIANAGmplsSwitchingTypeTC | .1.3.6.1.2.1.10.166.13.2.1.1.4 |
| gmplsTunnelLinkProtection This bitmask indicates the level of link protection required. A
value of zero (no bits set) indicates that any protection may be
used. The following describes these bitfields:
… | column | Bits | .1.3.6.1.2.1.10.166.13.2.1.1.5 |
| gmplsTunnelGPid This object indicates the payload carried by the LSP. It is only
required when GMPLS will be used for this LSP.
The values to use are defined in the TEXTUAL-CONVEN… | column | IANA-GMPLS-TC-MIBIANAGmplsGeneralizedPidTC | .1.3.6.1.2.1.10.166.13.2.1.1.6 |
| gmplsTunnelSecondary Indicates that the requested LSP is a secondary LSP.
This object is only meaningful if gmplsTunnelLSPEncoding is not
set to 'tunnelLspNotGmpls'. | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.10.166.13.2.1.1.7 |
| gmplsTunnelPathComp This value instructs the source node on how to perform path
computation on the explicit route specified by the associated
entries in the gmplsTunnelHopTable.
dynami… | column | Enumeration | .1.3.6.1.2.1.10.166.13.2.1.1.9 |