gmplsTunnelAdminStatusFlags

GMPLS-TE-STD-MIB · .1.3.6.1.2.1.10.166.13.2.1.1.18
MIB view Table view

Object

column r/w IANA-GMPLS-TC-MIBIANAGmplsAdminStatusInformationTC 
Determines the setting of the Admin Status flags in the
Admin Status object or TLV, as described in RFC 3471.  Setting
this field to a non-zero value will result in the inclusion of
the Admin Status object on signaling messages.
              
The values to use are defined in the TEXTUAL-CONVENTION
IANAGmplsAdminStatusInformationTC found in the
IANA-GMPLS-TC-MIB module.
              
This value of this object can be modified when the
corresponding mplsTunnelRowStatus and mplsTunnelAdminStatus
is active(1).  By doing so, a new signaling message will be
              
triggered including the requested Admin Status object or
TLV.

Context

MIB
GMPLS-TE-STD-MIB
OID
.1.3.6.1.2.1.10.166.13.2.1.1.18
Type
column
Access
readwrite
Status
current
Parent
gmplsTunnelEntry
Table
gmplsTunnelTable
Siblings
18

Syntax

IANA-GMPLS-TC-MIBIANAGmplsAdminStatusInformationTC
Source
IANA-GMPLS-TC-MIBIANAGmplsAdminStatusInformationTC
Base type
Bits

Values & Constraints

Type Values
0reflect
1reserved1
2reserved2
3reserved3
4reserved4
5reserved5
6reserved6
7reserved7
8reserved8
9reserved9
10reserved10
11reserved11
12reserved12
13reserved13
14reserved14
15reserved15
16reserved16
17reserved17
18reserved18
19reserved19
20reserved20
21reserved21
22reserved22
23oamFlowsEnabled
24oamAlarmsEnabled
25handover
26lockout
27inhibitAlarmCommunication
28callControl
29testing
30administrativelyDown
31deleteInProgress

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
gmplsTunnelUnnumIf
Denotes whether or not this tunnel corresponds to an unnumbered interface represented by an entry in the interfaces group table (the ifTable) with ifType set to mpls(166). …
columnSNMPv2-TCTruthValue.1.3.6.1.2.1.10.166.13.2.1.1.1
gmplsTunnelUpstreamNotifyRecipientType
This object is used to aid in interpretation of gmplsTunnelUpstreamNotifyRecipient.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.2.1.10.166.13.2.1.1.10
gmplsTunnelUpstreamNotifyRecipient
Indicates the address of the upstream recipient for Notify messages relating to this tunnel and issued by this LSR. This information is typically received from an upstream LSR in…
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.2.1.10.166.13.2.1.1.11
gmplsTunnelSendResvNotifyRecipientType
This object is used to aid in interpretation of gmplsTunnelSendResvNotifyRecipient.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.2.1.10.166.13.2.1.1.12
gmplsTunnelSendResvNotifyRecipient
Indicates to an upstream LSR the address to which it should send downstream Notify messages relating to this tunnel. This object is only valid when signaling a tunn…
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.2.1.10.166.13.2.1.1.13
gmplsTunnelDownstreamNotifyRecipientType
This object is used to aid in interpretation of gmplsTunnelDownstreamNotifyRecipient.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.2.1.10.166.13.2.1.1.14
gmplsTunnelDownstreamNotifyRecipient
Indicates the address of the downstream recipient for Notify messages relating to this tunnel and issued by this LSR. This information is typically received from an upstream LSR …
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.2.1.10.166.13.2.1.1.15
gmplsTunnelSendPathNotifyRecipientType
This object is used to aid in interpretation of gmplsTunnelSendPathNotifyRecipient.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.2.1.10.166.13.2.1.1.16
gmplsTunnelSendPathNotifyRecipient
Indicates to a downstream LSR the address to which it should send upstream Notify messages relating to this tunnel. This object is only valid when signaling a tunne…
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.2.1.10.166.13.2.1.1.17
gmplsTunnelExtraParamsPtr
Some tunnels will run over transports that can usefully support technology-specific additional parameters (for example, Synchronous Optical Network (SONET) resource usage). Such …
columnSNMPv2-TCRowPointer.1.3.6.1.2.1.10.166.13.2.1.1.19
gmplsTunnelAttributes
This bitmask indicates optional parameters for this tunnel. These bits should be taken in addition to those defined in mplsTunnelSessionAttributes in order to determine the full s…
columnBits.1.3.6.1.2.1.10.166.13.2.1.1.2
gmplsTunnelLSPEncoding
This object indicates the encoding of the LSP being requested. A value of 'tunnelLspNotGmpls' indicates that GMPLS signaling is not in use. Some objects in this MI…
columnIANA-GMPLS-TC-MIBIANAGmplsLSPEncodingTypeTC.1.3.6.1.2.1.10.166.13.2.1.1.3
gmplsTunnelSwitchingType
Indicates the type of switching that should be performed on a particular link. This field is needed for links that advertise more than one type of switching capability. …
columnIANA-GMPLS-TC-MIBIANAGmplsSwitchingTypeTC.1.3.6.1.2.1.10.166.13.2.1.1.4
gmplsTunnelLinkProtection
This bitmask indicates the level of link protection required. A value of zero (no bits set) indicates that any protection may be used. The following describes these bitfields: …
columnBits.1.3.6.1.2.1.10.166.13.2.1.1.5
gmplsTunnelGPid
This object indicates the payload carried by the LSP. It is only required when GMPLS will be used for this LSP. The values to use are defined in the TEXTUAL-CONVEN…
columnIANA-GMPLS-TC-MIBIANAGmplsGeneralizedPidTC.1.3.6.1.2.1.10.166.13.2.1.1.6
gmplsTunnelSecondary
Indicates that the requested LSP is a secondary LSP. This object is only meaningful if gmplsTunnelLSPEncoding is not set to 'tunnelLspNotGmpls'.
columnSNMPv2-TCTruthValue.1.3.6.1.2.1.10.166.13.2.1.1.7
gmplsTunnelDirection
Whether this tunnel carries forward data only (is unidirectional) or is bidirectional. Values of this object other than 'forward' are meaningful only if gmplsTunnel…
columnEnumeration.1.3.6.1.2.1.10.166.13.2.1.1.8
gmplsTunnelPathComp
This value instructs the source node on how to perform path computation on the explicit route specified by the associated entries in the gmplsTunnelHopTable. dynami…
columnEnumeration.1.3.6.1.2.1.10.166.13.2.1.1.9