gigamonSnmpPowerSource

GIGAMON-SNMP-MIB · .1.3.6.1.4.1.26866.1.2.28

Object

scalar Enumeration

power source:
0 - main power
1 - poe(Power over Ethernet)
2 - -48V Power

Context

MIB: GIGAMON-SNMP-MIB
OID: .1.3.6.1.4.1.26866.1.2.28
Type: scalar
Access: readonly
Status: current
Parent: gigamonSnmpNotificationObjects
Siblings: 28

Syntax

Enumeration

Values & Constraints

Enumerated Values

`0`	mainPower
`1`	poe
`2`	power48V

Related Objects

Sibling Objects

Object	Type	Syntax	OID
gigamonSnmpNotifLevel It acts as a payload for the level of Gigamon's Notifications.	scalar	Enumeration	`.1.3.6.1.4.1.26866.1.2.1`
gigamonSnmpNotifFirmwareName Name of GigaVUE firmware.	scalar	OctetString	`.1.3.6.1.4.1.26866.1.2.10`
gigamonSnmpNotifModuleOperationType It indicates the operation performed on module	scalar	Enumeration	`.1.3.6.1.4.1.26866.1.2.11`
gigamonSnmpNotifModuleName Module name of GigaVUE module	scalar	OctetString	`.1.3.6.1.4.1.26866.1.2.12`
gigamonNotifSlotNumber Slot number	scalar	Enumeration	`.1.3.6.1.4.1.26866.1.2.13`
gigamonSnmpNotifUserName User login name typed in	scalar	OctetString	`.1.3.6.1.4.1.26866.1.2.14`
gigamonSnmpNotifFileName Saved configuration file name	scalar	OctetString	`.1.3.6.1.4.1.26866.1.2.15`
gigamonNotifPowerStatus Power Status	scalar	Enumeration	`.1.3.6.1.4.1.26866.1.2.16`
gigamonSnmpNotifHardWareName Description of Hardware	scalar	OctetString	`.1.3.6.1.4.1.26866.1.2.17`
gigamonSnmpNotifGigaVUE420SlotNumber Slot number	scalar	Enumeration	`.1.3.6.1.4.1.26866.1.2.18`
gigamonSnmpNotifFanName Name of fan	scalar	OctetString	`.1.3.6.1.4.1.26866.1.2.19`
gigamonSnmpNotifDescription It acts as a payload for the description of Gigamon's Notifications. The value is to describe the reason for the notification.	scalar	OctetString	`.1.3.6.1.4.1.26866.1.2.2`
gigamonNotifFanStatus Fan Status	scalar	Enumeration	`.1.3.6.1.4.1.26866.1.2.20`
gigamonSnmpNotifUtilizationAlarm It indicates over-threshold port utilization alarm of Gigamon's Notifications.	scalar	Enumeration	`.1.3.6.1.4.1.26866.1.2.21`
gigamonSnmpNotifUtilizationThreshold Utilization threshold percentage	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.26866.1.2.22`
gigamonSnmpBatteryLevel battery level: 0 - battery charge complete 1 - battery level has been down below 75% 2 - battery level has been down below 50% 3 - battery level has been down below 25% 4 - batte…	scalar	Enumeration	`.1.3.6.1.4.1.26866.1.2.23`
gigamonSnmpPortLinkSpeed port link speed: 0 - Not Apply if link is down 1 - 10 Mbps 2 - 100 Mbps 3 - 1000 Mbps 4 - 10000 Mbps 5 - 40000 Mbps 6 - 100000 Mbps	scalar	Enumeration	`.1.3.6.1.4.1.26866.1.2.24`
gigamonSnmpPortLinkDuplex port link duplex: 0 - Not Apply if link is down 1 - full duplex 2 - half duplex	scalar	Enumeration	`.1.3.6.1.4.1.26866.1.2.25`
gigamonSnmpNotifCpuIndex Index of CPU, starting from 0	scalar	Unsigned32	`.1.3.6.1.4.1.26866.1.2.26`
gigamonSnmpNotifFsMountPoint Mount point for this filesystem	scalar	OctetString	`.1.3.6.1.4.1.26866.1.2.27`
gigamonSnmpNotifBpsUnitName Name of BPS unit	scalar	OctetString	`.1.3.6.1.4.1.26866.1.2.29`
gigamonSnmpNotifOpType It specifies the type of operation of Gigamon's Notifications.	scalar	Enumeration	`.1.3.6.1.4.1.26866.1.2.3`
gigamonSnmpNotifPortName The alpha-numerical name of a port shown in Gigamon's Notifications.	scalar	OctetString	`.1.3.6.1.4.1.26866.1.2.4`
gigamonSnmpNotifPortLinkStatus It indicates port link status of Gigamon's Notifications.	scalar	Enumeration	`.1.3.6.1.4.1.26866.1.2.5`
gigamonSnmpNotifTAPRelayStatus It indicates TAP relay status of Gigamon's Notifications.	scalar	Enumeration	`.1.3.6.1.4.1.26866.1.2.6`
gigamonSnmpNotifRxTxType It indicates Incoming/RX or outgoing/TX packets	scalar	Enumeration	`.1.3.6.1.4.1.26866.1.2.7`
gigamonSnmpNotifRxTxErrorType It indicates RX/TX error type of Gigamon's Notifications.	scalar	Enumeration	`.1.3.6.1.4.1.26866.1.2.8`
gigamonSnmpNotifCounter 32-bit Counter.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.26866.1.2.9`