upsStatusgen
GESINGLEUPS-MIB ·
.1.3.6.1.4.1.818.1.1.10.10.12
Object
scalar
NonNegativeInteger32
The global UPS status is returned. Every bit reflects a specific
status condition. Unused bits returns as 0. The status value can
also be found on other commands. The value SNMPNOSUCHNAME means
'invalid status' or 'status value non available'.
Status
1 0000 0001h upsStatusEcomodeIsOn
2 0000 0002h upsStatusBatteryIsCharging
4 0000 0004h upsStatusBatteryIsDischarging
8 0000 0008h upsStatusAlarmIsActive
16 0000 0010h upsStatusRectifierIsOn
32 0000 0020h upsStatusLowBattery
64 0000 0040h upsStatusOnBypass
128 0000 0080h upsStatusMainsBypassOK
256 0000 0100h upsStatusMainsRectifierOK
512 0000 0200h upsStatusDetourIsOn
1024 0000 0400h upsStatusAcousticAlarmIsOn
2048 0000 0800h upsStatusGlobalServiceCheck
4096 0000 1000h upsStatusInverterIsOn
8192 0000 2000h upsStatusNotInParallel (Q1 open)
16384 0000 4000h upsStatusResetLoadOff
32768 0000 8000h upsStatusLoadOff
65536 0001 0000h upsStatusBoostMode
131072 0002 0000h upsStatusBuckMode
262144 0004 0000h upsStatusIemModeIsOn
524288 0008 0000h upsStatus5thFilterIsOn
1048576 0010 0000h upsStatus11thFilterIsOn
2097152 0020 0000h upsStatus2ndRectifierBridgeIsOn
4194304 0040 0000h - reserved -
8388608 0080 0000h - reserved -
16777216 0100 0000h - reserved -
33554432 0200 0000h - reserved -
67108864 0400 0000h - reserved -
134217728 0800 0000h - reserved -
268435456 1000 0000h upsGlobalParallelValues
Context
- MIB
- GESINGLEUPS-MIB
- OID
.1.3.6.1.4.1.818.1.1.10.10.12- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- upsGetSetgen
- Siblings
- 23
Syntax
NonNegativeInteger32
- Source
- NonNegativeInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: 0..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| upsEventGetNextgen The number of events to retreive from the UPS event buffer.
When this object is set the EventTable will be filled with the
requested number of entries. The value upsEventSetStarti… | scalar | PositiveInteger32 | .1.3.6.1.4.1.818.1.1.10.10.1 |
| upsParameterTableSizegen The number of entries in the parameter table.
This object indicates the number of rows in the parameter table. | scalar | NonNegativeInteger32 | .1.3.6.1.4.1.818.1.1.10.10.10 |
| upsParameterGenTable A list of parameter entries. The number of entries is always
16, and the value of upsParameterTableSize gives the number of valid
entries from the begging of the table. Invalid en… | table | - | .1.3.6.1.4.1.818.1.1.10.10.11 |
| upsMainsStatisticsMBfailgen Count of main bypass failures (>200 ms), since UPS installation. | scalar | NonNegativeInteger32 | .1.3.6.1.4.1.818.1.1.10.10.13 |
| upsMainsStatisticsMRfailgen Count of mains rectifier failures (>200 ms), since UPS installation. | scalar | NonNegativeInteger32 | .1.3.6.1.4.1.818.1.1.10.10.14 |
| upsMainsStatisticsB2gen Count of transients on the mains bypass (0..2 ms), during the last 7 days. | scalar | NonNegativeInteger32 | .1.3.6.1.4.1.818.1.1.10.10.15 |
| upsMainsStatisticsB5gen Count of transients on the mains bypass (2..5 ms), during the last 7 days. | scalar | NonNegativeInteger32 | .1.3.6.1.4.1.818.1.1.10.10.16 |
| upsMainsStatisticsB10gen Count of transients on the mains bypass (5..10 ms), during the last 7 days. | scalar | NonNegativeInteger32 | .1.3.6.1.4.1.818.1.1.10.10.17 |
| upsMainsStatisticsB200gen Count of transients on the mains bypass (10..200 ms), during the last 7 days. | scalar | NonNegativeInteger32 | .1.3.6.1.4.1.818.1.1.10.10.18 |
| upsMainsStatisticsBypRelgen Bypass reliability degree [0..100%;255]. The value NOSUCHNAME means 'not available'. | scalar | NonNegativeInteger32 | .1.3.6.1.4.1.818.1.1.10.10.19 |
| upsEventGetPreviousgen The number of events to retreive from the UPS event buffer.
When this object is set the EventTable will be filled with the
requested number of entries. The value upsEventLastTime … | scalar | PositiveInteger32 | .1.3.6.1.4.1.818.1.1.10.10.2 |
| upsTimegen The current timestamp (or real-time) of the UPS. For the format,
see 'Timestamp' specifications. The write-command has to comply with the
correct timestamp format expected by th… | scalar | NonNegativeInteger32 | .1.3.6.1.4.1.818.1.1.10.10.20 |
| upsRequestPermissiongen An encrypted code is send to enable use of restricted write objects during
a limited period of time. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.818.1.1.10.10.21 |
| upsEventGetCodegen The code which is used as starting point to downloading the events from the
UPS event buffer. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.818.1.1.10.10.22 |
| upsEventSpinLockgen A spin lock on the event subsystem. | scalar | SNMPv2-TCTestAndIncr | .1.3.6.1.4.1.818.1.1.10.10.23 |
| upsParameterSpinLockgen A spin lock on the parameters subsystem. | scalar | SNMPv2-TCTestAndIncr | .1.3.6.1.4.1.818.1.1.10.10.24 |
| upsEventSetStartingTimeStampgen The timestamp which is used as starting point for downloading
events from the UPS event buffer | scalar | NonNegativeInteger32 | .1.3.6.1.4.1.818.1.1.10.10.3 |
| upsEventRetreiveCurrentTimeStampgen The current timestamp is retreived from the UPS | scalar | NonNegativeInteger32 | .1.3.6.1.4.1.818.1.1.10.10.4 |
| upsEventTableSizegen The number of entries in the event table.
This object indicates the number of rows in the event table. | scalar | NonNegativeInteger32 | .1.3.6.1.4.1.818.1.1.10.10.5 |
| upsEventGenTable A list of event table entries. The number of entries is always
10, and the value of upsEventTableSize gives the number of valid
entries from the begging of the table. Invalid en… | table | - | .1.3.6.1.4.1.818.1.1.10.10.6 |
| upsParametersReadgen The number of parameters to retreive from the UPS.
When this object is set the ParameterTable will be filled with the
requested number of entries. The value upsParametersStartAddr… | scalar | PositiveInteger32 | .1.3.6.1.4.1.818.1.1.10.10.7 |
| upsParametersWritegen The number of parameters to write to the UPS.
When this object is set the ParameterTable will be send to the ups.
The value upsParametersStartAddress will be used for the first v… | scalar | PositiveInteger32 | .1.3.6.1.4.1.818.1.1.10.10.8 |
| upsParametersStartAddressgen The address which is used as starting point for downloading
parameters from the UPS | scalar | NonNegativeInteger32 | .1.3.6.1.4.1.818.1.1.10.10.9 |