a3ComVlanIfStatus

GENERIC-3COM-VLAN-MIB-1-0-1 · .1.3.6.1.4.1.43.10.1.14.1.2.1.6

Object

column mandatory r/w RowStatus

The status column for this VLAN interface. 
This OBJECT can be set to:
              
		active(1)
		createAndGo(4)
		createAndWait(5)
		destroy(6)
              
The following values may be read:
		active(1)
		notInService(2)
		notReady(3).
              		
		Setting this object to createAndGo(4) causes the agent
		to attempt to create and commit the row based on 
		the contents of the objects in the row.  If all necessary
		information is present in the row and the values are
		acceptible to the agent, the agent will change the 
		status to active(1).  If any of the necessary objects  
		are not available, the agent will reject the creation
		request.	
              
		Setting this object to createAndWait(5) causes a row
		in this table to be created.  The agent sets the
		status to notInService(2) if all of the information is
		present in the row and the values are acceptable to the
		agent; otherwise, the agent sets the status to
		notReady(3).
              
		Setting this object to active(1) is only valid when
		the current status is active(1) or notInService(2).  
              
		When the state of the row transitions is set to active(1),
		the agent creates the corresponding row in the ifTable..
              
		Setting this object to destroy(6) will remove the corresponding
		VLAN interface, remove the entry in this table, and the
		corresponding entries in the a3ComVlanGlobalMappingTable
		and the ifTable.
              
		In order for a set of this object to destroy(6) to succeed,
		all dependencies on this row must have been removed.  These
		will include any stacking dependencies in the ifStackTable and
		any protocol specific tables dependencies.

Context

MIB: GENERIC-3COM-VLAN-MIB-1-0-1
OID: .1.3.6.1.4.1.43.10.1.14.1.2.1.6
Type: column
Access: readwrite
Status: mandatory
Parent: a3ComVlanIfEntry
Table: a3ComVlanIfTable
Siblings: 6

Syntax

RowStatus

Source: RowStatus
Base type: Integer32

Values & Constraints

Type Constraints

range: 1..6

Related Objects

Sibling Objects

Object	Type	Syntax	OID
a3ComVlanIfIndex mandatory The index value of this row and the vlan's ifIndex in the ifTable. The NMS obtains the index value for this row by reading the a3ComNextAvailableVirtIfIndex object.	column	Integer32	`.1.3.6.1.4.1.43.10.1.14.1.2.1.1`
a3ComVlanIfDescr mandatory This is a description of the VLAN interface.	column	OctetString	`.1.3.6.1.4.1.43.10.1.14.1.2.1.2`
a3ComVlanIfType mandatory The VLAN interface type.	column	A3ComVlanType	`.1.3.6.1.4.1.43.10.1.14.1.2.1.3`
a3ComVlanIfGlobalIdentifier mandatory An administratively assigned global VLAN identifier. For VLAN interfaces, on different network devices, which are part of the same globally identified VLAN, the value of this obj…	column	Integer32	`.1.3.6.1.4.1.43.10.1.14.1.2.1.4`
a3ComVlanIfInfo mandatory A TLV encoded information string for the VLAN interface. The information contained within this string corresponds to VLAN information not contained within this table, but containe…	column	OctetString	`.1.3.6.1.4.1.43.10.1.14.1.2.1.5`
a3ComVlanIfIgnoreStpFlag mandatory Enable/disable STP for this VLAN interface. Setting this object to true will cause the ports on this VLAN to ignore STP BPDUs. When a vlan is first created, the Default value is …	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.43.10.1.14.1.2.1.7`