sIfMauDefaultType
GBNDeviceSWAPI-MIB ·
.1.3.6.1.4.1.13464.1.2.2.2.6.2.1.1.11
Object
column
r/w
ObjectIdentifier
This object identifies the default administrative
10 or 100 Mb/s baseband MAU type, to be used in
conjunction with the operational MAU type denoted
by sIfMauType.
The set of possible values for this object is the
same as the set defined for the sIfMauType object.
This object represents the administratively-
configured type of the MAU. If auto-negotiation
is not enabled or is not implemented for this MAU,
the value of this object determines the
operational type of the MAU. In this case, a set
to this object will force the MAU into the
specified operating mode.
If auto-negotiation is implemented and enabled for
this MAU, the operational type of the MAU is
determined by auto-negotiation, and the value of
this object denotes the type to which the MAU will
automatically revert if/when auto-negotiation is
later disabled.
NOTE TO IMPLEMENTORS: It may be necessary to
provide for underlying hardware implementations
which do not follow the exact behavior specified
above. In particular, when
sIfMauAutoNegAdminStatus transitions from enabled
to disabled, the agent implementation must ensure
that the operational type of the MAU (as reported
by sIfMauType) correctly transitions to the value
specified by this object, rather than continuing
to operate at the value earlier determined by the
auto-negotiation function.
Context
- MIB
- GBNDeviceSWAPI-MIB
- OID
.1.3.6.1.4.1.13464.1.2.2.2.6.2.1.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- sIfMauEntry
- Table
- sIfMauTable
- Siblings
- 4
Syntax
ObjectIdentifier
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sIfMauIndex This variable uniquely identifies the MAU
described by this entry from among other MAUs
connected to the same interface (sIfMauIfIndex). | column | Integer32 | .1.3.6.1.4.1.13464.1.2.2.2.6.2.1.1.2 |
| sIfMauType This object identifies the 10 or 100 Mb/s
baseband or broadband MAU type. An initial set of
MAU types are defined above. The assignment of
OBJECT IDENTIFIERs to new types of MAU… | column | ObjectIdentifier | .1.3.6.1.4.1.13464.1.2.2.2.6.2.1.1.3 |
| sIfMauMediaAvailable If the MAU is a link or fiber type (FOIRL,
10BASE-T, 10BASE-F) then this is equivalent to
the link test fail state/low light function.
For an AUI or a coax (including broadband) M… | column | Enumeration | .1.3.6.1.4.1.13464.1.2.2.2.6.2.1.1.5 |
| sIfMauJabberState The value other(1) is returned if the jabber
state is not 2, 3, or 4. The agent must always
return other(1) for MAU type dot3MauTypeAUI.
The value unknown(2) is re… | column | Enumeration | .1.3.6.1.4.1.13464.1.2.2.2.6.2.1.1.7 |