portConfigMstpDefaultPriority
G6-STP-MIB ·
.1.3.6.1.4.1.3181.10.6.2.42.2.1.9
Object
column
r/w
Integer32
The port priority used in all MSTP instances unless otherwise configured in mstp_port_priority.
Context
- MIB
- G6-STP-MIB
- OID
.1.3.6.1.4.1.3181.10.6.2.42.2.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- portConfigEntry
- Table
- portConfigTable
- Siblings
- 15
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| portConfigPortIndex Automatically generated | column | Integer32 | .1.3.6.1.4.1.3181.10.6.2.42.2.1.1 |
| portConfigMstpPortPriority The port priority used in all specific MSTP instances. Syntax: mstp_id:port_priority. E.g.: 1:32, 2:128, 5:128 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.2.42.2.1.10 |
| portConfigMstpDefaultAdminPathCost The port path cost used in all MSTP instances unless otherwise configured in mstp_port_admin_path_cost. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3181.10.6.2.42.2.1.11 |
| portConfigMstpPortAdminPathCost The port path cost used in specific MSTP instances. Syntax: mstp_id:port_path_cost. E.g.: 1:4, 2:100 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.2.42.2.1.12 |
| portConfigBpduGuard When enabled STP attempts from a user port are blocked. This prevents a malicious user from influencing the overall network routing. | column | Enumeration | .1.3.6.1.4.1.3181.10.6.2.42.2.1.13 |
| portConfigBpduReceiveOnly When enabled this port listens to incoming BPDU packets for spanning tree algorithm but never transmits any. | column | Enumeration | .1.3.6.1.4.1.3181.10.6.2.42.2.1.14 |
| portConfigRestrictTcn When enabled the port does not forward topology change notification BPDUs. | column | Enumeration | .1.3.6.1.4.1.3181.10.6.2.42.2.1.15 |
| portConfigRestrictRoot When enabled this port cannot become a root bridge port for the spanning tree protocol. | column | Enumeration | .1.3.6.1.4.1.3181.10.6.2.42.2.1.16 |
| portConfigEnable Enable (R)STP for this port. | column | Enumeration | .1.3.6.1.4.1.3181.10.6.2.42.2.1.2 |
| portConfigPriority Port priority value. | column | Integer32 | .1.3.6.1.4.1.3181.10.6.2.42.2.1.3 |
| portConfigAdminP2pPort A value of forceTrue indicates that this port should always be treated as if it is connected to a point-to-point link. A value of forceFalse indicates that this port should be tre… | column | Enumeration | .1.3.6.1.4.1.3181.10.6.2.42.2.1.4 |
| portConfigAdminEdgePort When enabled this port is assumed to be an edge port. | column | Enumeration | .1.3.6.1.4.1.3181.10.6.2.42.2.1.5 |
| portConfigAdminPathCost The contribution of this port to the path cost of paths towards the spanning tree root which include this port. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3181.10.6.2.42.2.1.6 |
| portConfigProtocolMigration When operating in RSTP mode, setting this object forces this port to transmit RSTP BPDUs. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.2.42.2.1.7 |
| portConfigBridgeAssurance The bridge assurance is used to detectunidirectional link failures or remote devices that stop sending spanning tree information due to a software fault. Important: Only enable wh… | column | Enumeration | .1.3.6.1.4.1.3181.10.6.2.42.2.1.8 |