natStatTotalNumberOfPktsDropped
FutureNat-MIB ·
.1.3.6.1.4.1.2076.14.1.1.11
Object
scalar
SNMPv2-SMICounter32
Gives the total number of packets that have been dropped by the NAT module due to various causes .
Context
- MIB
- FutureNat-MIB
- OID
.1.3.6.1.4.1.2076.14.1.1.11- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- natStatInfo
- Siblings
- 18
Syntax
SNMPv2-SMICounter32
- Source
- SNMPv2-SMICounter32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| natEnable Enables or Disables NAT globally. | scalar | Status | .1.3.6.1.4.1.10876.101.1.14.1.1.1 |
| natStatTotalNumberOfActiveSessions This gives the total number of currently active sessions (both UDP and
TCP) on all interfaces | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.10876.101.1.14.1.1.10 |
| natStatTotalNumberOfSessionsClosed Gives the total number of idle sessions that are removed from NAT
table. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.10876.101.1.14.1.1.12 |
| natIKEPortTranslation This is used to enable or disable IKE port translation feature . | scalar | Status | .1.3.6.1.4.1.10876.101.1.14.1.1.13 |
| natIKETimeout This gives the amount of time the IKE session entry can be present in the
NAT IKE session table without being used or referred, before being removed from
the NAT session table. He… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.1.14.1.1.14 |
| natIPSecTimeout This gives the amount of time the IPSec session entry can be present in the
NAT IPSec session table without being used or referred, before being removed from
the NAT session table… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.1.14.1.1.15 |
| natIPSecPendingTimeout This gives the amount of time the IPSec pending entry can be present in the
NAT IPSec Pending table without being used or referred, before being removed from the NAT session table… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.1.14.1.1.16 |
| natIPSecMaxRetry This is used to set the maximum number of retries allowed for IPSec session in the pending Table. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.1.14.1.1.17 |
| sipAlgPort Gives the the port to be used for sip signaling. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.1.14.1.1.18 |
| natSipAlgPartialEntryTimeOut This gives the amount of time until which a connection can stay idle,
after which the connection will be terminated. The time is given in
seconds. | scalar | Integer32 | .1.3.6.1.4.1.10876.101.1.14.1.1.19 |
| natTypicalNumberOfEntries This gives the initial number of entries in the Dynamic Table for
which the memory should be alloted at initialisation time.
When changed dynamically, the updation will occur only… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.1.14.1.1.2 |
| natTranslatedLocalPortStart Gives the start of next free translated local port to be
used (in case it is set) if NAPT is enabled and a new
connection arrives at the NAT Router. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.1.14.1.1.3 |
| natIdleTimeOut This gives the amount of time until which a connection can stay idle,
after which the connection will be terminated. The time is given in
seconds. | scalar | Integer32 | .1.3.6.1.4.1.10876.101.1.14.1.1.4 |
| natTcpTimeOut This gives the amount of time the TCP session entry can be present in the
NAT session table without being used or referred, before being removed from
the NAT session table. Here t… | scalar | Integer32 | .1.3.6.1.4.1.10876.101.1.14.1.1.5 |
| natUdpTimeOut This gives the amount of time the UDP session entry can be present in the
NAT session table without being used or referred, before being removed from
the NAT session table. Here t… | scalar | Integer32 | .1.3.6.1.4.1.10876.101.1.14.1.1.6 |
| natTrcFlag The value given enables the respective trace options. Each value of
the flag corresponds to a certain trace option.
Flag Value Trace Option
0 … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.1.14.1.1.7 |
| natStatDynamicAllocFailureCount This gives number of times dynamic allocation (malloc) has failed. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.10876.101.1.14.1.1.8 |
| natStatTotalNumberOfTranslations This gives the total number of packets that are translated by NAT
module on all the interfaces | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.10876.101.1.14.1.1.9 |