opticalIfConfigPrbsPmReset

FspR7-MIB · .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.45
MIB view Table view

Object

column r/w FspR7PrbsPmReset 
Reset PRBS PM counters

Context

MIB
FspR7-MIB
OID
.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.45
Type
column
Access
readwrite
Status
current
Parent
opticalIfConfigEntry
Table
opticalIfConfigTable
Siblings
48

Syntax

FspR7PrbsPmReset
Source
FspR7PrbsPmReset
Base type
Enumeration

Values & Constraints

Type Values
0undefined
1none
2all

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
opticalIfConfigAlsMode
A configuration request for the Automatic Laser Shutdown (ALS) function. Refer to FspR7AlsMode Textual Convention for details.
columnFspR7AlsMode.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.1
opticalIfConfigSigDegThresOtu
Background-Block-Error-Based Signal Degradation Definition for OTU
column% Integer32.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.10
opticalIfConfigSigDegPeriodOtu
Integration Period for Signal degrade
columns Unsigned32.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.11
opticalIfConfigSigDegThresOdu
Background-Block-Error-Based Signal Degradation Definition for ODU
column% Integer32.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.12
opticalIfConfigSigDegPeriodOdu
Integration Period for Signal degrade
columns Unsigned32.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.13
opticalIfConfigSigDegThresSonetSection
Bit-Error-Based Degradation Definition for SONET (standard integration period)
columnFspR7BERThresholdSection.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.14
opticalIfConfigSigDegThresSdhSection
Block-Error-Based Degradation Definition for SDH (standard integration period). Defined as percentage Background Block Errors (30% default) evaluated over a defined period (SDPER-…
column% Unsigned32.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.15
opticalIfConfigSigDegPeriodSdhSection
Provisionable Signal Degrade Integration Period for SDH
columns Unsigned32.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.16
opticalIfConfigDispersionMode
Dispersion Compensation Mode
columnFspR7DispersionModes.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.17
opticalIfConfigDispersionSetting
Dispersion setting of dispersion comensating module
columnps/nm Integer32.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.18
opticalIfConfigOpticalSetPoint
Sets the optical power for power equalization in ROADM or for channel power control in OPCM
column0.1 dBm Integer32.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.19
opticalIfConfigErrorForwarding
A configuration request for the error forwarding function. Refer to FspR7ErrorFwdMode Textual Convention for details.
columnFspR7ErrorFwdMode.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.2
opticalIfConfigOffset
Sets the offset for the mean optical power for power equalization in ROADM
column0.1 dB Integer32.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.20
opticalIfConfigTilt
Change of optical channel power in dB over the complete transmission band
column0.1 dB Integer32.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.21
opticalIfConfigAreaId
OSPF Area ID for IP Interface
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.22
opticalIfConfigAutoThresReset
This object is used for reseting the Adaptive Threshold value to the factory default.
columnFspR7AutoThresReset.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.23
opticalIfConfigUtag
If untagged frames shall be enabled on this port or not.
columnFspR7UntaggedFrames.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.24
opticalIfConfigPvid
Default VLAN ID (both STAG/CTAG mode) in case UTAG is enabled
columnUnsigned32.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.25
opticalIfConfigPriority
Default PCP in case UTAG is Enabled. The Prio may be remapped in the EVC.
columnUnsigned32.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.26
opticalIfConfigStagType
TAG type field
columnFspR7SnmpHexString.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.27
opticalIfConfigCac
Enable of CAC
columnFspR7L2CacEnable.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.28
opticalIfConfigMaxFrameSize
Max Frame Size
columnUnsigned32.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.29
opticalIfConfigFecType
Configuration of FEC type.
columnFspR7FecType.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.3
opticalIfConfigLagActivePorts
The amount of active ports in the LAG.
columnUnsigned32.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.30
opticalIfConfigLagPrio
Part of ID. Port pri that defines standby.
columnUnsigned32.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.31
opticalIfConfigLagLoadBallanceSource
What source is used in the load balance calculation
columnFspR7LagLoadBallanceSource.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.32
opticalIfConfigLacpTimeout
Timeout of the LACP
columnFspR7LacpTimeout.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.33
opticalIfConfigTransmitChannel
Channel
columnFspR7ChannelIdentifier.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.34
opticalIfConfigFarEndCommunication
Used for Optojack plugs; Communication to Far End Plug is observed
columnFspR7YesNo.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.35
opticalIfConfigLacpMode
Enable of LACP state machine
columnFspR7LacpMode.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.36
opticalIfConfigTxOffDelay
Enable or disable TXOFFHOLD Period for Error Forwarding and LKDO-OFF Consequent Action.
columnFspR7EnableDisable.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.37
opticalIfConfigOpuPayloadType
OPU Payload Type Indicator
columnFspR7OpuPayloadType.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.38
opticalIfConfigOscOpticalSetpoint
Sets the OSC optical power
column0.1 dBm Integer32.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.39
opticalIfConfigLaserOffDelayFunction
A configuration request for the Laser Off Delay function. This function delays turning off the laser as a consequent action to a defect.
columnADVA-MIBEnableState.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.4
opticalIfConfigFiberBrand
Brand of fiber present in the fiber plant
columnFspR7FiberBrand.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.40
opticalIfConfigTiltSet
Tilt setting as discrete values versus a range
columnFspR7TiltSet.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.41
opticalIfConfigForceFwdAsePilotOn
Force the BWD Raman pilot on to allow building of FWD Raman ASE Table
columnFspR7LaserForcedOperation.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.42
opticalIfConfigXfpDecisionThres
XFP Decision threshold setting
columnFspR7XfpDecisionThres.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.43
opticalIfConfigDisparityCorrection
Disparity correction
columnADVA-MIBEnableState.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.44
opticalIfConfigTestPrbsRcvMode
PRBS test pattern received
column-.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.46
opticalIfConfigTestPrbsTrmtMode
PRBS test pattern transmitted
column-.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.47
opticalIfConfigTributarySlotMethod
Tributary Slot assignment method
columnFspR7ManualAuto.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.48
opticalIfConfigForceLaserOn
Laser Forced On
columnFspR7LaserForcedOperation.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.5
opticalIfConfigBip
Bit Interleaved Parity
columnFspR7Bip.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.53
opticalIfConfigLossAttenuation
LOS Attenuation Finding in progress
columnFspR7LossAttenuation.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.6
opticalIfConfigAprHighThreshold
Automatic Power Reduction High Threshold
column0.1 dBm SNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.7
opticalIfConfigAseTabCreation
ASE Table creation in process
columnFspR7AseTabOpr.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.8
opticalIfConfigWdmRxChannel
Configuration of Rx optical channel
columnFspR7ChannelIdentifier.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.9