opticalIfConfigAutoThresReset
FspR7-MIB ·
.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.23
Object
column
r/w
FspR7AutoThresReset
This object is used for reseting the Adaptive Threshold value to the factory default.
Context
- MIB
- FspR7-MIB
- OID
.1.3.6.1.4.1.2544.1.11.2.4.3.3.1.23- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- opticalIfConfigEntry
- Table
- opticalIfConfigTable
- Siblings
- 48
Syntax
FspR7AutoThresReset
- Source
- FspR7AutoThresReset
- Base type
Enumeration
Values & Constraints
Type Values
0 | undefined |
1 | rls |
2 | rtf |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| opticalIfConfigAlsMode A configuration request for the Automatic Laser Shutdown
(ALS) function. Refer to FspR7AlsMode Textual Convention for details. | column | FspR7AlsMode | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.1 |
| opticalIfConfigSigDegThresOtu Background-Block-Error-Based Signal Degradation Definition for OTU | column | % Integer32 | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.10 |
| opticalIfConfigSigDegPeriodOtu Integration Period for Signal degrade | column | s Unsigned32 | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.11 |
| opticalIfConfigSigDegThresOdu Background-Block-Error-Based Signal Degradation Definition for ODU | column | % Integer32 | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.12 |
| opticalIfConfigSigDegPeriodOdu Integration Period for Signal degrade | column | s Unsigned32 | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.13 |
| opticalIfConfigSigDegThresSonetSection Bit-Error-Based Degradation Definition for SONET (standard integration period) | column | FspR7BERThresholdSection | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.14 |
| opticalIfConfigSigDegThresSdhSection Block-Error-Based Degradation Definition for SDH (standard integration period).
Defined as percentage Background Block Errors (30% default) evaluated
over a defined period (SDPER-… | column | % Unsigned32 | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.15 |
| opticalIfConfigSigDegPeriodSdhSection Provisionable Signal Degrade Integration Period for SDH | column | s Unsigned32 | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.16 |
| opticalIfConfigDispersionMode Dispersion Compensation Mode | column | FspR7DispersionModes | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.17 |
| opticalIfConfigDispersionSetting Dispersion setting of dispersion comensating module | column | ps/nm Integer32 | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.18 |
| opticalIfConfigOpticalSetPoint Sets the optical power for power equalization in ROADM or for channel power
control in OPCM | column | 0.1 dBm Integer32 | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.19 |
| opticalIfConfigErrorForwarding A configuration request for the error forwarding function. Refer to
FspR7ErrorFwdMode Textual Convention for details. | column | FspR7ErrorFwdMode | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.2 |
| opticalIfConfigOffset Sets the offset for the mean optical power for power equalization in ROADM | column | 0.1 dB Integer32 | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.20 |
| opticalIfConfigTilt Change of optical channel power in dB over the complete transmission band | column | 0.1 dB Integer32 | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.21 |
| opticalIfConfigAreaId OSPF Area ID for IP Interface | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.22 |
| opticalIfConfigUtag If untagged frames shall be enabled on this port or not. | column | FspR7UntaggedFrames | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.24 |
| opticalIfConfigPvid Default VLAN ID (both STAG/CTAG mode) in case UTAG is enabled | column | Unsigned32 | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.25 |
| opticalIfConfigPriority Default PCP in case UTAG is Enabled. The Prio may be remapped in the EVC. | column | Unsigned32 | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.26 |
| opticalIfConfigStagType TAG type field | column | FspR7SnmpHexString | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.27 |
| opticalIfConfigCac Enable of CAC | column | FspR7L2CacEnable | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.28 |
| opticalIfConfigMaxFrameSize Max Frame Size | column | Unsigned32 | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.29 |
| opticalIfConfigFecType Configuration of FEC type. | column | FspR7FecType | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.3 |
| opticalIfConfigLagActivePorts The amount of active ports in the LAG. | column | Unsigned32 | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.30 |
| opticalIfConfigLagPrio Part of ID. Port pri that defines standby. | column | Unsigned32 | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.31 |
| opticalIfConfigLagLoadBallanceSource What source is used in the load balance calculation | column | FspR7LagLoadBallanceSource | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.32 |
| opticalIfConfigLacpTimeout Timeout of the LACP | column | FspR7LacpTimeout | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.33 |
| opticalIfConfigTransmitChannel Channel | column | FspR7ChannelIdentifier | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.34 |
| opticalIfConfigFarEndCommunication Used for Optojack plugs; Communication to Far End Plug is observed | column | FspR7YesNo | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.35 |
| opticalIfConfigLacpMode Enable of LACP state machine | column | FspR7LacpMode | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.36 |
| opticalIfConfigTxOffDelay Enable or disable TXOFFHOLD Period for Error Forwarding and LKDO-OFF Consequent Action. | column | FspR7EnableDisable | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.37 |
| opticalIfConfigOpuPayloadType OPU Payload Type Indicator | column | FspR7OpuPayloadType | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.38 |
| opticalIfConfigOscOpticalSetpoint Sets the OSC optical power | column | 0.1 dBm Integer32 | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.39 |
| opticalIfConfigLaserOffDelayFunction A configuration request for the Laser Off Delay function.
This function delays turning off the laser as a consequent action to
a defect. | column | ADVA-MIBEnableState | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.4 |
| opticalIfConfigFiberBrand Brand of fiber present in the fiber plant | column | FspR7FiberBrand | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.40 |
| opticalIfConfigTiltSet Tilt setting as discrete values versus a range | column | FspR7TiltSet | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.41 |
| opticalIfConfigForceFwdAsePilotOn Force the BWD Raman pilot on to allow building of FWD Raman ASE Table | column | FspR7LaserForcedOperation | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.42 |
| opticalIfConfigXfpDecisionThres XFP Decision threshold setting | column | FspR7XfpDecisionThres | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.43 |
| opticalIfConfigDisparityCorrection Disparity correction | column | ADVA-MIBEnableState | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.44 |
| opticalIfConfigPrbsPmReset Reset PRBS PM counters | column | FspR7PrbsPmReset | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.45 |
| opticalIfConfigTestPrbsRcvMode PRBS test pattern received | column | - | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.46 |
| opticalIfConfigTestPrbsTrmtMode PRBS test pattern transmitted | column | - | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.47 |
| opticalIfConfigTributarySlotMethod Tributary Slot assignment method | column | FspR7ManualAuto | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.48 |
| opticalIfConfigForceLaserOn Laser Forced On | column | FspR7LaserForcedOperation | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.5 |
| opticalIfConfigBip Bit Interleaved Parity | column | FspR7Bip | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.53 |
| opticalIfConfigLossAttenuation LOS Attenuation Finding in progress | column | FspR7LossAttenuation | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.6 |
| opticalIfConfigAprHighThreshold Automatic Power Reduction High Threshold | column | 0.1 dBm SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.7 |
| opticalIfConfigAseTabCreation ASE Table creation in process | column | FspR7AseTabOpr | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.8 |
| opticalIfConfigWdmRxChannel Configuration of Rx optical channel | column | FspR7ChannelIdentifier | .1.3.6.1.4.1.2544.1.11.2.4.3.3.1.9 |