neAINSProvEnabled
FspR7-MIB ·
.1.3.6.1.4.1.2544.1.11.2.2.1.9
Object
scalar
r/w
FspR7YesNo
Global system variable. Automatic IN-Service Provisioning ENAbled flag. This value is controlled by settings in the system configuration file. If Y, entities which are autoprovisioned will be created with an initial state of OOS-AU,AINS. If N, autoprovisioned entities will be created in an ISNR state. Entities in an OOS-AU,AINS state will automatically transition to an in-service state after a continuous interval without any active service affecting conditions. The duration of this interval is equal to that given by the AISPDEFTM attribute at the start of the continuous interval.
Syntax
FspR7YesNo
- Source
- FspR7YesNo
- Base type
Enumeration
Values & Constraints
Type Values
0 | undefined |
1 | yes |
2 | no |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| neSystemId System Identifier | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2544.1.11.2.2.1.1 |
| neAINSDefaultTimer AINS Default Signal Timer. The length of time in minutes for which an
entity must be free of service affecting conditions in order to automatically
transition from an OOS-AU,AINS … | scalar | Min Unsigned32 | .1.3.6.1.4.1.2544.1.11.2.2.1.10 |
| nePreferredFacilityType Default type of facility model to use for automatically created
facilities. SDH will cause STM64, STM16, VC4, VC3 type
facilities to be auto-created. SONET will cause OC192,
OC48,… | scalar | FspR7PreferredFacilityType | .1.3.6.1.4.1.2544.1.11.2.2.1.11 |
| neForceDelete Force Delete | scalar | ADVA-MIBEnableState | .1.3.6.1.4.1.2544.1.11.2.2.1.12 |
| neSdhSesThreshold Severely Errorred Seconds percentage for SDH facilities. Sets the default
relative percentage of Errorred Seconds within a PM interval at which Severely Errorred
Seconds will be d… | scalar | % Unsigned32 | .1.3.6.1.4.1.2544.1.11.2.2.1.14 |
| neOtnSesThreshold Severely Errorred Seconds percentage for OTN facilities. Sets the default
relative percentage of Errorred Seconds within a PM interval at which Severely Errorred
Seconds will be d… | scalar | % Unsigned32 | .1.3.6.1.4.1.2544.1.11.2.2.1.15 |
| neTopologyType deprecated Monitored Topology Type | scalar | FspR7TopologyType | .1.3.6.1.4.1.2544.1.11.2.2.1.16 |
| neDatabaseSerialNumber read from Master Shelf and stored in the DB 'once'; only changed when a command which implies a change is given (INIT__SYS with DBSRST = ACCEPT) | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2544.1.11.2.2.1.17 |
| neDatabaseType this shows whether the system is running on a temporary auxiliary DB or on the DB in ACT, which is the normal situation | scalar | FspR7DatabaseType | .1.3.6.1.4.1.2544.1.11.2.2.1.18 |
| neRackSize Size of the Rack in HU | scalar | Unsigned32 | .1.3.6.1.4.1.2544.1.11.2.2.1.19 |
| neSysType Type of Network Element | scalar | FspR7SysType | .1.3.6.1.4.1.2544.1.11.2.2.1.2 |
| neDatabaseNcuType DB Type of NCU | scalar | FspR7EquipmentType | .1.3.6.1.4.1.2544.1.11.2.2.1.20 |
| neDatabaseNcuAid Aid of NCU in database | scalar | ADVA-MIBEntityIndex | .1.3.6.1.4.1.2544.1.11.2.2.1.21 |
| neModusLastRestart Information over the modus of the last restart | scalar | FspR7ModusLastRestart | .1.3.6.1.4.1.2544.1.11.2.2.1.22 |
| neSystemIp System IP | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2544.1.11.2.2.1.23 |
| neSystemIpMask System IP Mask | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2544.1.11.2.2.1.24 |
| neAreaId OSPF Area ID for IP Interface | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2544.1.11.2.2.1.25 |
| neBackupScuAvailable DB Backup on SCU available | scalar | FspR7ScuDbBackup | .1.3.6.1.4.1.2544.1.11.2.2.1.26 |
| neRouteRedistribution Redistribution of routes in OSPF | scalar | FspR7RouteRedist | .1.3.6.1.4.1.2544.1.11.2.2.1.27 |
| neAlarmActivationTime Alarm activation time. The hold-off period during which a defect must persist in order to be raised as an alarmed event (in seconds). | scalar | 0.1 s Unsigned32 | .1.3.6.1.4.1.2544.1.11.2.2.1.28 |
| neAlarmDeactivationTime Alarm deactivation time. The hold-on period during
which a defect must remain absent in order for the corresponding
previously raised alarm reporting the condition will be cleared… | scalar | 0.1 s Unsigned32 | .1.3.6.1.4.1.2544.1.11.2.2.1.29 |
| neAutoProvisioning Global system variable. Enables or disables athe auto-provisioning functionality. | scalar | FspR7YesNo | .1.3.6.1.4.1.2544.1.11.2.2.1.3 |
| neTimeConfig | node | - | .1.3.6.1.4.1.2544.1.11.2.2.1.30 |
| neTimerForceOprToRls The length of time in minutes for which
a FRCD__OPERATION OPR state will automatically changed to RLS state.
The value is set via the system configuration file. | scalar | min Unsigned32 | .1.3.6.1.4.1.2544.1.11.2.2.1.31 |
| neScuRing SCU ring interconnect | scalar | FspR7ScuRing | .1.3.6.1.4.1.2544.1.11.2.2.1.32 |
| neScuRingCap SCU ring interconnect | scalar | FspR7ScuRingCaps | .1.3.6.1.4.1.2544.1.11.2.2.1.33 |
| neAlarmProfileApply Apply Alarm Profile to all existing entities | scalar | FspR7ApplyAlarmProfile | .1.3.6.1.4.1.2544.1.11.2.2.1.34 |
| neAlarmProfileApplyCap Apply Alarm Profile to all existing entities | scalar | FspR7ApplyAlarmProfileCaps | .1.3.6.1.4.1.2544.1.11.2.2.1.35 |
| neFtpServer FTP server enable/disable configuration | scalar | FspR7FtpServer | .1.3.6.1.4.1.2544.1.11.2.2.1.36 |
| neFtpServerCap FTP server enable/disable configuration | scalar | FspR7FtpServerCaps | .1.3.6.1.4.1.2544.1.11.2.2.1.37 |
| neFtpClient FTP client enable/disable configuration | scalar | FspR7FtpClient | .1.3.6.1.4.1.2544.1.11.2.2.1.38 |
| neSshDeamon Secure Shell Server enable/disable configuration | scalar | FspR7SshDeamon | .1.3.6.1.4.1.2544.1.11.2.2.1.39 |
| neType Type of Network Element | scalar | FspR7NeType | .1.3.6.1.4.1.2544.1.11.2.2.1.4 |
| neEqlzAdmin Scheduled Equalization Administration | scalar | FspR7EqlzAdminState | .1.3.6.1.4.1.2544.1.11.2.2.1.40 |
| neEqlzAdminCap Scheduled Equalization Administration | scalar | FspR7EqlzAdminStateCaps | .1.3.6.1.4.1.2544.1.11.2.2.1.41 |
| neEqlzInterval Scheduled Equalization Interval | scalar | FspR7EqlzInterval | .1.3.6.1.4.1.2544.1.11.2.2.1.42 |
| neEqlzIntervalCap Scheduled Equalization Interval | scalar | FspR7EqlzIntervalCaps | .1.3.6.1.4.1.2544.1.11.2.2.1.43 |
| neEqlzStartDate Scheduled Equalization Start Date | scalar | FspR7Date | .1.3.6.1.4.1.2544.1.11.2.2.1.44 |
| neEqlzStartTime Scheduled Equalization Start Time | scalar | FspR7Time | .1.3.6.1.4.1.2544.1.11.2.2.1.45 |
| neDefaultGateway Default gateway for IP routing | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2544.1.11.2.2.1.46 |
| neSwType Network Elemtent SW Type | scalar | FspR7EquipmentType | .1.3.6.1.4.1.2544.1.11.2.2.1.47 |
| neCpPcsPriority Path Computation Server Priority | scalar | Unsigned32 | .1.3.6.1.4.1.2544.1.11.2.2.1.48 |
| neScuAutoRestoreEnabled Enable/Disable Automatic Data Base Restore from SCU. | scalar | FspR7ScuDbBackup | .1.3.6.1.4.1.2544.1.11.2.2.1.49 |
| neSwVersion Software Version of the NCU software. <x>.<y>[.<z>] | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2544.1.11.2.2.1.5 |
| neNodeNameSyntax Node Name Syntax | scalar | FspR7NodeId | .1.3.6.1.4.1.2544.1.11.2.2.1.50 |
| neAutoProvLifCp Automatic Provisioning of LIF-CP | scalar | FspR7AutopLif | .1.3.6.1.4.1.2544.1.11.2.2.1.51 |
| neGradeInventory Used to distinguish between NCU capabilities (range of supported services or applications) | scalar | ADVA-MIBGrade | .1.3.6.1.4.1.2544.1.11.2.2.1.6 |
| authTrapSrcIp Source IP address of sending NE. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2544.1.11.2.2.1.60 |
| authTrapLctIp IP address of LCT used in NE access. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2544.1.11.2.2.1.61 |
| authTrapStatus Indication whether authentication was succesful/unsuccessful. | scalar | FspR7AccessStatus | .1.3.6.1.4.1.2544.1.11.2.2.1.62 |
| authTrapSessionId Session name used in NE access. | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2544.1.11.2.2.1.63 |
| authTrapProtocol Protocol type used in NE access. | scalar | FspR7AccessProtocol | .1.3.6.1.4.1.2544.1.11.2.2.1.64 |
| authTrapPort Port number used in NE access. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.11.2.2.1.65 |
| authTrapUserName The name string for user authentication purposes | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2544.1.11.2.2.1.66 |
| authTrapRadUserName The name string for radius authentication purposes | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2544.1.11.2.2.1.67 |
| authTrapSuccessfulAuthCount Number of successful authentications. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.11.2.2.1.68 |
| authTrapUnsuccessfulAuthCount Number of unsuccessful authentications. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.11.2.2.1.69 |
| neModel Marketing model name of System | scalar | FspR7Model | .1.3.6.1.4.1.2544.1.11.2.2.1.7 |
| systemBusy System Busy state. | scalar | FspR7SystemBusy | .1.3.6.1.4.1.2544.1.11.2.2.1.70 |
| snmpAgentStartupDate Date | scalar | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2544.1.11.2.2.1.71 |
| lastErrorStatusCounter | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.11.2.2.1.72 |
| lastErrorStatus | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2544.1.11.2.2.1.73 |
| startPmSnapshot Apply reference values | scalar | FspR7StartPmSnapshot | .1.3.6.1.4.1.2544.1.11.2.2.1.74 |
| pmSnapshotStatus Reference value Status | scalar | FspR7PmSnapshotStatus | .1.3.6.1.4.1.2544.1.11.2.2.1.75 |
| maxBackplaneBandwidth Parameter stores information about maximum backplane bandwidth that can be used. | scalar | kbit/s SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.11.2.2.1.76 |
| usedBackplaneBandwidth Parameter stores information about currenty used backplane bandwidth. Its value is limited by Maximum Backplane Bandwidth (BCKPLBW-MAX). | scalar | kbit/s SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.11.2.2.1.77 |
| neSecurityMode The switch for handling Security Mode of a Network Element. It supports basic(1) and enhanced(2) security mode.
After switch is performed, a user is forced to change the password … | scalar | FspR7SecurityMode | .1.3.6.1.4.1.2544.1.11.2.2.1.78 |
| neSecurityModeCapability Security Mode | scalar | FspR7SecurityModeCaps | .1.3.6.1.4.1.2544.1.11.2.2.1.79 |
| neVendorId The name of the manufacturer | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2544.1.11.2.2.1.8 |
| neMinPasswordLength Minimum password length settable in range 8..31 characters. It is
accessible only using SNMPv3 protocol version with authentication
and privacy | scalar | Unsigned32 | .1.3.6.1.4.1.2544.1.11.2.2.1.80 |