forceDeployProvApsApsType
FspR7-MIB ·
.1.3.6.1.4.1.2544.1.11.2.5.7.3.1.12
Object
column
r/w
ApsType
The type of APS implemented in this protection group.
Context
- MIB
- FspR7-MIB
- OID
.1.3.6.1.4.1.2544.1.11.2.5.7.3.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- forceDeployProvApsEntry
- Table
- forceDeployProvApsTable
- Siblings
- 14
Syntax
ApsType
- Source
- ApsType
- Base type
Enumeration
Values & Constraints
Type Values
0 | undefined |
2 | line |
3 | sncN |
4 | sncI |
5 | sncS |
6 | eth |
7 | phys |
8 | sncNPM |
9 | sncNTCM |
10 | sncISM |
11 | mux |
12 | pcs |
13 | ethSncI |
14 | ethSncN |
15 | ethSncS |
16 | ethSncT |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| forceDeployProvApsRowStatus RowStatus | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2544.1.11.2.5.7.3.1.1 |
| forceDeployProvApsFarEndIp IP Address assigned to PPP Termination Point on Far-End NE. Default
is set by NE System on LINK establishment if FENDIPACPT = Y | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2544.1.11.2.5.7.3.1.10 |
| forceDeployProvApsPeerAid AID of Protection Partner involved in the protection group. | column | ADVA-MIBEntityIndex | .1.3.6.1.4.1.2544.1.11.2.5.7.3.1.11 |
| forceDeployProvApsRevertMode Revertive Protection Switching | column | ApsRevertMode | .1.3.6.1.4.1.2544.1.11.2.5.7.3.1.13 |
| forceDeployProvApsWaitToRestore Wait to Restore | column | min Unsigned32 | .1.3.6.1.4.1.2544.1.11.2.5.7.3.1.14 |
| forceDeployProvApsDirection Indicates whether the APS function is 'unidirectional' (single-ended)
or 'bidirectional' (dual-ended). | column | ApsDirection | .1.3.6.1.4.1.2544.1.11.2.5.7.3.1.15 |
| forceDeployProvApsForceDestroy Forced Destroy | column | FspR7ForcedStatus | .1.3.6.1.4.1.2544.1.11.2.5.7.3.1.2 |
| forceDeployProvApsSDswitching This state controls whether the switch criteria for the APS group will
include the Signal Degrade alarm. | column | ADVA-MIBEnableState | .1.3.6.1.4.1.2544.1.11.2.5.7.3.1.3 |
| forceDeployProvApsHoldOffTime This value controls the switch delay (0 to 10 seconds in
100ms steps) for the protection group. Changing the hold-off
time when the timer is active will not affect the active
time… | column | ADVA-MIBApsHoldoffTime | .1.3.6.1.4.1.2544.1.11.2.5.7.3.1.4 |
| forceDeployProvApsProtectionMech The protection type of this protection group. | column | ADVA-MIBProtectionMech | .1.3.6.1.4.1.2544.1.11.2.5.7.3.1.5 |
| forceDeployProvApsWorkingAid AID of working port involved in the protection group. | column | ADVA-MIBEntityIndex | .1.3.6.1.4.1.2544.1.11.2.5.7.3.1.6 |
| forceDeployProvApsProtectionAid AID of protection entity involved in the protection group. | column | ADVA-MIBEntityIndex | .1.3.6.1.4.1.2544.1.11.2.5.7.3.1.7 |
| forceDeployProvApsSignalDegradeSwitching Switch Trigger Additionally on Signal Degrade Link Detection | column | ADVA-MIBEnableState | .1.3.6.1.4.1.2544.1.11.2.5.7.3.1.8 |
| forceDeployProvApsSignalFailureSwitching Switch Trigger on Signal Failure Link Detection | column | ADVA-MIBEnableState | .1.3.6.1.4.1.2544.1.11.2.5.7.3.1.9 |