deployProvIfPortRole

FspR7-MIB · .1.3.6.1.4.1.2544.1.11.2.5.4.1.1.94
MIB view Table view

Object

column r/w FspR7PortRole 
ADVA cloud Port Roles

Context

MIB
FspR7-MIB
OID
.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.94
Type
column
Access
readwrite
Status
current
Parent
deployProvIfEntry
Table
deployProvIfTable
Siblings
120

Syntax

FspR7PortRole
Source
FspR7PortRole
Base type
Enumeration

Values & Constraints

Type Values
0undefined
1uni
2i-nni
3nni

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
deployProvIfRowStatus
RowStatus
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.1
deployProvIfFecType
Configuration of FEC type.
columnFspR7FecType.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.10
deployProvIfMaxFrameSize
Max Frame Size
columnUnsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.100
deployProvIfVethAid
Shows if PORT is a member in the LAG with the VETH AID
columnADVA-MIBEntityIndex.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.101
deployProvIfLagPrio
Part of ID. Port pri that defines standby.
columnUnsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.102
deployProvIfLagPortType
Type/Speed of connected ports in the LAG
columnFspR7LagPortType.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.103
deployProvIfLagActivePorts
The amount of active ports in the LAG.
columnUnsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.104
deployProvIfLacpMode
Enable of LACP state machine
columnFspR7LacpMode.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.105
deployProvIfLagLoadBallanceSource
What source is used in the load balance calculation
columnFspR7LagLoadBallanceSource.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.106
deployProvIfLacpTimeout
Timeout of the LACP
columnFspR7LacpTimeout.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.107
deployProvIfFarEndCommunication
Used for Optojack plugs; Communication to Far End Plug is observed
columnFspR7YesNo.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.108
deployProvIfEqlzAdmin
Scheduled Equalization Administration
columnFspR7EqlzAdminState.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.109
deployProvIfTimingSource
The timing source for this interface. - internal: used in stand-alone, point-to-point topologies stand-alone (dedicated fiber operation). - loopTiming: e.g. used in point-to-point…
columnADVA-MIBSonetTimingSource.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.11
deployProvIfTxOffDelay
Enable or disable TXOFFHOLD Period for Error Forwarding and LKDO-OFF Consequent Action.
columnFspR7EnableDisable.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.110
deployProvIfOpuPayloadType
OPU Payload Type Indicator
columnFspR7OpuPayloadType.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.111
deployProvIfOscOpticalSetpoint
Sets the OSC optical power
column0.1 dBm Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.112
deployProvIfFiberBrand
Brand of fiber present in the fiber plant
columnFspR7FiberBrand.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.113
deployProvIfTiltSet
Tilt setting as discrete values versus a range
columnFspR7TiltSet.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.114
deployProvIfXfpDecisionThres
XFP Decision threshold setting
columnFspR7XfpDecisionThres.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.115
deployProvIfAutoPTassignment
Auto assignment of ODU PT
columnFspR7ManualAuto.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.116
deployProvIfTributarySlotMethod
Tributary Slot assignment method
columnFspR7ManualAuto.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.117
deployProvIfOduTribPortNo
ODU Tributary Port Number
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.118
deployProvIfOduTribTimeSlottNo
ODU Tributary slot number. Multiple values can be entered as a string, separated by commas or given as a range. For capabilities objects possible number of slots and valid range a…
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.119
deployProvIfTcmALevel
Configuration of TCMA level.
columnADVA-MIBOtnTcmLevel.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.12
deployProvIfRevertiveMode
Revertive Protection Switching
columnApsRevertMode.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.120
deployProvIfBip
Bit Interleaved Parity
columnFspR7Bip.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.125
deployProvIfTcmBLevel
Configuration of TCMB level.
columnADVA-MIBOtnTcmLevel.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.13
deployProvIfSigDegThresSonetLine
Bit-Error-Based Degradation Definition for SONET (standard integration period)
columnFspR7BERThreshold.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.14
deployProvIfSigDegThresSdhMs
Block-Error-Based Degradation Definition for SDH (standard integration period). Defined as percentage Background Block Errors (30% default) evaluated over a defined period (SDPER-…
column% Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.15
deployProvIfSignalDegradePeriod
The measurement period in seconds used together with the deployProvIfSigDegThresSdhRegSect based on the block error counting method. The valid range is 2..10, The default being 7.
columns Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.16
deployProvIfAutonegotiation
Autonegotiation of the data rate
columnADVA-MIBEnableState.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.17
deployProvIfBitrate
Provisioned data rate
columnFspR7Bitrate.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.18
deployProvIfDuplex
Duplex Mode Provision.
columnADVA-MIBEthDuplexMode.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.19
deployProvIfForceDestroy
Forced Destroy
columnFspR7ForcedStatus.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.2
deployProvIfFlowControl
Flow Control mechanism
columnFspR7FlowControlMode.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.20
deployProvIfOtnStuffing
Indicates if bit/byte stuffing is used in the transport signal.
columnFspR7Stuff.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.21
deployProvIfSigDegThresOtu
Background-Block-Error-Based Signal Degradation Definition for OTU
column% Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.22
deployProvIfSigDegPeriodOtu
Integration Period for Signal degrade
columns Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.23
deployProvIfSigDegThresOdu
Background-Block-Error-Based Signal Degradation Definition for ODU
column% Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.24
deployProvIfSigDegPeriodOdu
Integration Period for Signal degrade
columns Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.25
deployProvIfSigDegThresOduTcmA
Background-Block-Error-Based Signal Degradation Definition for TCM-A
column% Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.26
deployProvIfSigDegPeriodOduTcmA
Integration Period for Signal degrade
columns Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.27
deployProvIfSigDegThresOduTcmB
Background-Block-Error-Based Signal Degradation Definition for TCM-B
column% Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.28
deployProvIfSigDegPeriodOduTcmB
Integration Period of TCMB Signal Segrade
columns Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.29
deployProvIfType
The TYPE defines the transport service type as wrapper with wrapper layer termination OR else as payload
columnFspR7InterfaceType.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.3
deployProvIfTilt
Change of optical channel power in dB over the complete transmission band
column0.1 dB Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.30
deployProvIfGain
Gain.
columnFspR7Gain.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.31
deployProvIfAdmin
The Adminstrative State.
columnFspR7AdminState.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.32
deployProvIfAttenuationGradient
Attenuation Gradient Threshold on Receive Fiber. Applies to both TRMT and RCV directions; but threshold violation is reported for each direction separately by the 'tapping' alarms…
column0.1 dB/min Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.33
deployProvIfSigDegThresReceiver
Signal Degrade Threshold on Receiver. Reported as ATTRMT-SDHT to far end.
column0.1 dB SNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.34
deployProvIfTcmCLevel
Activation of Tandem Connection Monitoring Instance C
columnADVA-MIBOtnTcmLevel.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.35
deployProvIfSigDegThresOduTcmC
Background-Block-Error-Based Signal Degradation Definition for TCM-C
column% Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.36
deployProvIfSigDegPeriodOduTcmC
Integration Period of TCMC Signal Segrade
columns Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.37
deployProvIfDisparityCorrection
Disparity correction
columnADVA-MIBEnableState.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.38
deployProvIfIpAddr
IP Address assigned to LAN IP Interface
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.39
deployProvIfPayload
The payload of the interface (inside a transport overhead). Relevant e. g. for OTN cards which wrap a payload into an OTU1/2 wrapper.
columnADVA-MIBOtnPayloadType.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.4
deployProvIfIpMask
IP MASK assigned to LAN IP Interface
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.40
deployProvIfOspf
OSPF Routing (Dynamic)
columnFspR7OspfMode.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.41
deployProvIfMetric
Routing Metric
columnUnsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.42
deployProvIfAreaId
OSPF Area ID for IP Interface
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.43
deployProvIfTraceFormSonetSection
Byte-Length of Trace Compared to Expected
columnADVA-MIBSonetTraceForm.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.44
deployProvIfTraceExpectedSonetSection
Expected Sec/RS trace. NULL TRACE implies that no trace comparison is made.
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.45
deployProvIfTraceTransmitSonetSection
Sec/RS Trace to be Transmitted
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.46
deployProvIfTimModeSonetSection
Detection of TIM Sonet Section Condition can be configured
columnADVA-MIBTimMode.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.47
deployProvIfTraceExpectedOtu
Expected SAPI part of the OTU trace (15 character). NULL TRACE implies that no trace comparison is made.
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.48
deployProvIfTraceTransmitSapiOtu
The transmitted SAPI part of the OTU trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.49
deployProvIfBehaviour
The configured behaviour of the interface. If configured as a network interface, the interface will use a WDM laser.
columnFspR7PortBehaviour.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.5
deployProvIfTraceTransmitDapiOtu
The transmitted DAPI part of the OTU trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.50
deployProvIfTraceTransmitOpspOtu
The transmitted Operator Specific part of the OTU trace (32 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.51
deployProvIfTimModeOtu
Detection of TIM-OTU Condition can be configured
columnADVA-MIBTimMode.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.52
deployProvIfTraceExpectedOdu
Expected SAPI part of the ODU trace (15 character). NULL TRACE implies that no trace comparison is made.
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.53
deployProvIfTraceTransmitSapiOdu
The transmitted SAPI part of the ODU trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.54
deployProvIfTraceTransmitDapiOdu
The transmitted DAPI part of the ODU trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.55
deployProvIfTraceTransmitOpspOdu
The transmitted Operator Specific part of the ODU trace (32 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.56
deployProvIfTimModeOdu
Detection of TIM-ODU Condition can be configured
columnADVA-MIBTimMode.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.57
deployProvIfTraceExpectedOduTcmA
Expected SAPI part of the TCMA trace (15 character). NULL TRACE-TCM implies that no trace comparison is made.
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.58
deployProvIfTraceTransmitSapiOduTcmA
The transmitted SAPI part of the TCMA trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.59
deployProvIfTerminationLevel
Signal Tremination Level of Intrusive Access to Header Information. Not used in 7.0, monitoring is one layer higher than TERM level, if applicable. All conditions detected on moni…
columnADVA-MIBOhTerminationLevel.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.6
deployProvIfTraceTransmitDapiOduTcmA
The transmitted DAPI part of the TCMA trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.60
deployProvIfTraceTransmitOpspOduTcmA
The transmitted Operator Specific part of the TCMA trace (32 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.61
deployProvIfTimModeOduTcmA
Detection of TIM-TCMA Condition can be configured
columnADVA-MIBTimMode.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.62
deployProvIfTraceExpectedOduTcmB
Expected SAPI part of the TCMB trace (15 character). NULL TRACE-TCM implies that no trace comparison is made.
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.63
deployProvIfTraceTransmitSapiOduTcmB
The transmitted SAPI part of the TCMB trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.64
deployProvIfTraceTransmitDapiOduTcmB
The transmitted DAPI part of the TCMB trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.65
deployProvIfTraceTransmitOpspOduTcmB
The transmitted Operator Specific part of the TCMB trace (32 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.66
deployProvIfTimModeOduTcmB
Detection of TIM-TCMB Condition can be configured
columnADVA-MIBTimMode.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.67
deployProvIfTraceExpectedOduTcmC
Expected SAPI part of the TCMC trace (15 character). NULL TRACE-TCM implies that no trace comparison is made.
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.68
deployProvIfTraceTransmitSapiOduTcmC
The transmitted SAPI part of the TCMC trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.69
deployProvIfAlsMode
A configuration request for the Automatic Laser Shutdown (ALS) function. Refer to FspR7AlsMode Textual Convention for details.
columnFspR7AlsMode.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.7
deployProvIfTraceTransmitDapiOduTcmC
The transmitted DAPI part of the TCMC trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.70
deployProvIfTraceTransmitOpspOduTcmC
The transmitted Operator Specific part of the TCMC trace (32 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.71
deployProvIfTimModeOduTcmC
Detection of TIM-TCMC Condition can be configured
columnADVA-MIBTimMode.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.72
deployProvIfChannelProvisioning
Channel
columnFspR7ChannelIdentifier.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.73
deployProvIfVariableGain
Variable Gain of EDFA
column0.1 dB Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.74
deployProvIfBand
The The optical band of the module.
columnFspR7OpticalBand.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.75
deployProvIfSigDegThreshold
Threshold for number of errors (CV or CV+DE) in one second
columnUnsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.76
deployProvIfSigDegPeriodIntegration
Integration Period for Signal degrade
columns Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.77
deployProvIfVoaMode
VOA operating mode
columnFspR7VoaMode.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.78
deployProvIfOpticalSetPoint
Sets the optical power for power equalization in ROADM or for channel power control in OPCM
column0.1 dBm Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.79
deployProvIfErrorForwarding
A configuration request for the error forwarding function. Refer to FspR7ErrorFwdMode Textual Convention for details.
columnFspR7ErrorFwdMode.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.8
deployProvIfVoaSetpoint
Sets the optical attenuation of VOA
column0.1 dB Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.80
deployProvIfLanAid
AID of LAN
columnADVA-MIBEntityIndex.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.81
deployProvIfAprHighThreshold
Automatic Power Reduction High Threshold
column0.1 dBm SNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.82
deployProvIfPumpPower
Total raman pump power
column0.2 dBm Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.83
deployProvIfIpType
Type of IP configuration
columnFspR7IpType.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.84
deployProvIfWdmRxChannel
Configuration of Rx optical channel
columnFspR7ChannelIdentifier.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.85
deployProvIfSigDegThresSonetSection
Bit-Error-Based Degradation Definition for SONET (standard integration period)
columnFspR7BERThresholdSection.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.86
deployProvIfSigDegThresSdhSection
Block-Error-Based Degradation Definition for SDH (standard integration period). Defined as percentage Background Block Errors (30% default) evaluated over a defined period (SDPER-…
column% Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.87
deployProvIfSigDegPeriodSdhSection
Provisionable Signal Degrade Integration Period for SDH
columns Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.88
deployProvIfDispersionMode
Dispersion Compensation Mode
columnFspR7DispersionModes.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.89
deployProvIfLaserOffDelayFunction
A configuration request for the Laser Off Delay function. This function delays turning off the laser as a consequent action to a defect.
columnADVA-MIBEnableState.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.9
deployProvIfDispersionSetting
Dispersion setting of dispersion comensating module
columnps/nm Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.90
deployProvIfOffset
Sets the offset for the mean optical power for power equalization in ROADM
column0.1 dB Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.91
deployProvIfFunction
Interface Function
columnFspR7InterfaceFunction.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.92
deployProvIfPortMode
Port Mode
columnFspR7PortMode.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.93
deployProvIfUtag
If untagged frames shall be enabled on this port or not.
columnFspR7UntaggedFrames.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.95
deployProvIfPvid
Default VLAN ID (both STAG/CTAG mode) in case UTAG is enabled
columnUnsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.96
deployProvIfPriority
Default PCP in case UTAG is Enabled. The Prio may be remapped in the EVC.
columnUnsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.97
deployProvIfStagType
TAG type field
columnFspR7SnmpHexString.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.98
deployProvIfCac
Enable of CAC
columnFspR7L2CacEnable.1.3.6.1.4.1.2544.1.11.2.5.4.1.1.99