deployProvIfDefaultsTraceTransmitDapiOdu
FspR7-MIB ·
.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.55
Object
column
OctetString
The transmitted DAPI part of the ODU trace (15 character)
Context
- MIB
- FspR7-MIB
- OID
.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.55- Type
- column
- Access
- readonly
- Status
- current
- Parent
- deployProvIfDefaultsEntry
- Table
- deployProvIfDefaultsTable
- Siblings
- 120
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-15
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| deployProvIfDefaultsRowStatus RowStatus | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.1 |
| deployProvIfDefaultsFecType Configuration of FEC type. | column | FspR7FecType | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.10 |
| deployProvIfDefaultsMaxFrameSize Max Frame Size | column | Unsigned32 | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.100 |
| deployProvIfDefaultsVethAid Shows if PORT is a member in the LAG with the VETH AID | column | ADVA-MIBEntityIndex | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.101 |
| deployProvIfDefaultsLagPrio Part of ID. Port pri that defines standby. | column | Unsigned32 | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.102 |
| deployProvIfDefaultsLagPortType Type/Speed of connected ports in the LAG | column | FspR7LagPortType | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.103 |
| deployProvIfDefaultsLagActivePorts The amount of active ports in the LAG. | column | Unsigned32 | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.104 |
| deployProvIfDefaultsLacpMode Enable of LACP state machine | column | FspR7LacpMode | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.105 |
| deployProvIfDefaultsLagLoadBallanceSource What source is used in the load balance calculation | column | FspR7LagLoadBallanceSource | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.106 |
| deployProvIfDefaultsLacpTimeout Timeout of the LACP | column | FspR7LacpTimeout | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.107 |
| deployProvIfDefaultsFarEndCommunication Used for Optojack plugs; Communication to Far End Plug is observed | column | FspR7YesNo | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.108 |
| deployProvIfDefaultsEqlzAdmin Scheduled Equalization Administration | column | FspR7EqlzAdminState | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.109 |
| deployProvIfDefaultsTimingSource The timing source for this interface.
- internal: used in stand-alone, point-to-point topologies stand-alone (dedicated fiber operation).
- loopTiming: e.g. used in point-to-point… | column | ADVA-MIBSonetTimingSource | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.11 |
| deployProvIfDefaultsTxOffDelay Enable or disable TXOFFHOLD Period for Error Forwarding and LKDO-OFF Consequent Action. | column | FspR7EnableDisable | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.110 |
| deployProvIfDefaultsOpuPayloadType OPU Payload Type Indicator | column | FspR7OpuPayloadType | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.111 |
| deployProvIfDefaultsOscOpticalSetpoint Sets the OSC optical power | column | 0.1 dBm Integer32 | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.112 |
| deployProvIfDefaultsFiberBrand Brand of fiber present in the fiber plant | column | FspR7FiberBrand | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.113 |
| deployProvIfDefaultsTiltSet Tilt setting as discrete values versus a range | column | FspR7TiltSet | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.114 |
| deployProvIfDefaultsXfpDecisionThres XFP Decision threshold setting | column | FspR7XfpDecisionThres | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.115 |
| deployProvIfDefaultsAutoPTassignment Auto assignment of ODU PT | column | FspR7ManualAuto | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.116 |
| deployProvIfDefaultsTributarySlotMethod Tributary Slot assignment method | column | FspR7ManualAuto | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.117 |
| deployProvIfDefaultsOduTribPortNo ODU Tributary Port Number | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.118 |
| deployProvIfDefaultsOduTribTimeSlottNo ODU Tributary slot number. Multiple values can be entered as a string, separated by commas or given as a range.
For capabilities objects possible number of slots and valid range a… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.119 |
| deployProvIfDefaultsTcmALevel Configuration of TCMA level. | column | ADVA-MIBOtnTcmLevel | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.12 |
| deployProvIfDefaultsRevertiveMode Revertive Protection Switching | column | ApsRevertMode | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.120 |
| deployProvIfDefaultsBip Bit Interleaved Parity | column | FspR7Bip | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.125 |
| deployProvIfDefaultsTcmBLevel Configuration of TCMB level. | column | ADVA-MIBOtnTcmLevel | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.13 |
| deployProvIfDefaultsSigDegThresSonetLine Bit-Error-Based Degradation Definition for SONET (standard integration period) | column | FspR7BERThreshold | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.14 |
| deployProvIfDefaultsSigDegThresSdhMs Block-Error-Based Degradation Definition for SDH (standard integration period).
Defined as percentage Background Block Errors (30% default) evaluated
over a defined period (SDPER-… | column | % Unsigned32 | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.15 |
| deployProvIfDefaultsSignalDegradePeriod The measurement period in seconds used together with
the deployProvIfSigDegThresSdhRegSect based on the block error counting method.
The valid range is 2..10,
The default being 7. | column | s Unsigned32 | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.16 |
| deployProvIfDefaultsAutonegotiation Autonegotiation of the data rate | column | ADVA-MIBEnableState | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.17 |
| deployProvIfDefaultsBitrate Provisioned data rate | column | FspR7Bitrate | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.18 |
| deployProvIfDefaultsDuplex Duplex Mode Provision. | column | ADVA-MIBEthDuplexMode | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.19 |
| deployProvIfDefaultsForceDestroy Forced Destroy | column | FspR7ForcedStatus | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.2 |
| deployProvIfDefaultsFlowControl Flow Control mechanism | column | FspR7FlowControlMode | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.20 |
| deployProvIfDefaultsOtnStuffing Indicates if bit/byte stuffing is used in the transport signal. | column | FspR7Stuff | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.21 |
| deployProvIfDefaultsSigDegThresOtu Background-Block-Error-Based Signal Degradation Definition for OTU | column | % Integer32 | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.22 |
| deployProvIfDefaultsSigDegPeriodOtu Integration Period for Signal degrade | column | s Unsigned32 | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.23 |
| deployProvIfDefaultsSigDegThresOdu Background-Block-Error-Based Signal Degradation Definition for ODU | column | % Integer32 | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.24 |
| deployProvIfDefaultsSigDegPeriodOdu Integration Period for Signal degrade | column | s Unsigned32 | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.25 |
| deployProvIfDefaultsSigDegThresOduTcmA Background-Block-Error-Based Signal Degradation Definition for TCM-A | column | % Integer32 | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.26 |
| deployProvIfDefaultsSigDegPeriodOduTcmA Integration Period for Signal degrade | column | s Unsigned32 | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.27 |
| deployProvIfDefaultsSigDegThresOduTcmB Background-Block-Error-Based Signal Degradation Definition for TCM-B | column | % Integer32 | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.28 |
| deployProvIfDefaultsSigDegPeriodOduTcmB Integration Period of TCMB Signal Segrade | column | s Unsigned32 | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.29 |
| deployProvIfDefaultsType The TYPE defines the transport service type as wrapper with wrapper layer
termination OR else as payload | column | FspR7InterfaceType | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.3 |
| deployProvIfDefaultsTilt Change of optical channel power in dB over the complete transmission band | column | 0.1 dB Integer32 | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.30 |
| deployProvIfDefaultsGain Gain. | column | FspR7Gain | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.31 |
| deployProvIfDefaultsAdmin The Adminstrative State. | column | FspR7AdminState | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.32 |
| deployProvIfDefaultsAttenuationGradient Attenuation Gradient Threshold on Receive Fiber. Applies to both
TRMT and RCV directions; but threshold violation is reported for
each direction separately by the 'tapping' alarms… | column | 0.1 dB/min Unsigned32 | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.33 |
| deployProvIfDefaultsSigDegThresReceiver Signal Degrade Threshold on Receiver. Reported as ATTRMT-SDHT to far end. | column | 0.1 dB SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.34 |
| deployProvIfDefaultsTcmCLevel Activation of Tandem Connection Monitoring Instance C | column | ADVA-MIBOtnTcmLevel | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.35 |
| deployProvIfDefaultsSigDegThresOduTcmC Background-Block-Error-Based Signal Degradation Definition for TCM-C | column | % Integer32 | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.36 |
| deployProvIfDefaultsSigDegPeriodOduTcmC Integration Period of TCMC Signal Segrade | column | s Unsigned32 | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.37 |
| deployProvIfDefaultsDisparityCorrection Disparity correction | column | ADVA-MIBEnableState | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.38 |
| deployProvIfDefaultsIpAddr IP Address assigned to LAN IP Interface | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.39 |
| deployProvIfDefaultsPayload The payload of the interface (inside a transport overhead).
Relevant e. g. for OTN cards which wrap a payload into an OTU1/2 wrapper. | column | ADVA-MIBOtnPayloadType | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.4 |
| deployProvIfDefaultsIpMask IP MASK assigned to LAN IP Interface | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.40 |
| deployProvIfDefaultsOspf OSPF Routing (Dynamic) | column | FspR7OspfMode | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.41 |
| deployProvIfDefaultsMetric Routing Metric | column | Unsigned32 | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.42 |
| deployProvIfDefaultsAreaId OSPF Area ID for IP Interface | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.43 |
| deployProvIfDefaultsTraceFormSonetSection Byte-Length of Trace Compared to Expected | column | ADVA-MIBSonetTraceForm | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.44 |
| deployProvIfDefaultsTraceExpectedSonetSection Expected Sec/RS trace. NULL TRACE implies that no trace comparison is made. | column | OctetString | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.45 |
| deployProvIfDefaultsTraceTransmitSonetSection Sec/RS Trace to be Transmitted | column | OctetString | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.46 |
| deployProvIfDefaultsTimModeSonetSection Detection of TIM Sonet Section Condition can be configured | column | ADVA-MIBTimMode | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.47 |
| deployProvIfDefaultsTraceExpectedOtu Expected SAPI part of the OTU trace (15 character).
NULL TRACE implies that no trace comparison is made. | column | OctetString | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.48 |
| deployProvIfDefaultsTraceTransmitSapiOtu The transmitted SAPI part of the OTU trace (15 character) | column | OctetString | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.49 |
| deployProvIfDefaultsBehaviour The configured behaviour of the interface. If configured as
a network interface, the interface will use a WDM laser. | column | FspR7PortBehaviour | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.5 |
| deployProvIfDefaultsTraceTransmitDapiOtu The transmitted DAPI part of the OTU trace (15 character) | column | OctetString | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.50 |
| deployProvIfDefaultsTraceTransmitOpspOtu The transmitted Operator Specific part of the OTU trace (32 character) | column | OctetString | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.51 |
| deployProvIfDefaultsTimModeOtu Detection of TIM-OTU Condition can be configured | column | ADVA-MIBTimMode | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.52 |
| deployProvIfDefaultsTraceExpectedOdu Expected SAPI part of the ODU trace (15 character).
NULL TRACE implies that no trace comparison is made. | column | OctetString | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.53 |
| deployProvIfDefaultsTraceTransmitSapiOdu The transmitted SAPI part of the ODU trace (15 character) | column | OctetString | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.54 |
| deployProvIfDefaultsTraceTransmitOpspOdu The transmitted Operator Specific part of the ODU trace (32 character) | column | OctetString | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.56 |
| deployProvIfDefaultsTimModeOdu Detection of TIM-ODU Condition can be configured | column | ADVA-MIBTimMode | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.57 |
| deployProvIfDefaultsTraceExpectedOduTcmA Expected SAPI part of the TCMA trace (15 character).
NULL TRACE-TCM implies that no trace comparison is made. | column | OctetString | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.58 |
| deployProvIfDefaultsTraceTransmitSapiOduTcmA The transmitted SAPI part of the TCMA trace (15 character) | column | OctetString | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.59 |
| deployProvIfDefaultsTerminationLevel Signal Tremination Level of Intrusive Access to Header Information.
Not used in 7.0, monitoring is one layer higher than TERM level,
if applicable. All conditions detected on moni… | column | ADVA-MIBOhTerminationLevel | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.6 |
| deployProvIfDefaultsTraceTransmitDapiOduTcmA The transmitted DAPI part of the TCMA trace (15 character) | column | OctetString | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.60 |
| deployProvIfDefaultsTraceTransmitOpspOduTcmA The transmitted Operator Specific part of the TCMA trace (32 character) | column | OctetString | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.61 |
| deployProvIfDefaultsTimModeOduTcmA Detection of TIM-TCMA Condition can be configured | column | ADVA-MIBTimMode | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.62 |
| deployProvIfDefaultsTraceExpectedOduTcmB Expected SAPI part of the TCMB trace (15 character). NULL TRACE-TCM implies that no trace comparison is made. | column | OctetString | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.63 |
| deployProvIfDefaultsTraceTransmitSapiOduTcmB The transmitted SAPI part of the TCMB trace (15 character) | column | OctetString | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.64 |
| deployProvIfDefaultsTraceTransmitDapiOduTcmB The transmitted DAPI part of the TCMB trace (15 character) | column | OctetString | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.65 |
| deployProvIfDefaultsTraceTransmitOpspOduTcmB The transmitted Operator Specific part of the TCMB trace (32 character) | column | OctetString | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.66 |
| deployProvIfDefaultsTimModeOduTcmB Detection of TIM-TCMB Condition can be configured | column | ADVA-MIBTimMode | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.67 |
| deployProvIfDefaultsTraceExpectedOduTcmC Expected SAPI part of the TCMC trace (15 character).
NULL TRACE-TCM implies that no trace comparison is made. | column | OctetString | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.68 |
| deployProvIfDefaultsTraceTransmitSapiOduTcmC The transmitted SAPI part of the TCMC trace (15 character) | column | OctetString | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.69 |
| deployProvIfDefaultsAlsMode A configuration request for the Automatic Laser Shutdown (ALS)
function. Refer to FspR7AlsMode Textual Convention for details. | column | FspR7AlsMode | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.7 |
| deployProvIfDefaultsTraceTransmitDapiOduTcmC The transmitted DAPI part of the TCMC trace (15 character) | column | OctetString | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.70 |
| deployProvIfDefaultsTraceTransmitOpspOduTcmC The transmitted Operator Specific part of the TCMC trace (32 character) | column | OctetString | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.71 |
| deployProvIfDefaultsTimModeOduTcmC Detection of TIM-TCMC Condition can be configured | column | ADVA-MIBTimMode | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.72 |
| deployProvIfDefaultsChannelProvisioning Channel | column | FspR7ChannelIdentifier | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.73 |
| deployProvIfDefaultsVariableGain Variable Gain of EDFA | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.74 |
| deployProvIfDefaultsBand The The optical band of the module. | column | FspR7OpticalBand | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.75 |
| deployProvIfDefaultsSigDegThreshold Threshold for number of errors (CV or CV+DE) in one second | column | Unsigned32 | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.76 |
| deployProvIfDefaultsSigDegPeriodIntegration Integration Period for Signal degrade | column | s Unsigned32 | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.77 |
| deployProvIfDefaultsVoaMode VOA operating mode | column | FspR7VoaMode | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.78 |
| deployProvIfDefaultsOpticalSetPoint Sets the optical power for power equalization in ROADM or for channel power control in OPCM | column | 0.1 dBm Integer32 | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.79 |
| deployProvIfDefaultsErrorForwarding A configuration request for the error forwarding
function. Refer to FspR7ErrorFwdMode Textual Convention for details. | column | FspR7ErrorFwdMode | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.8 |
| deployProvIfDefaultsVoaSetpoint Sets the optical attenuation of VOA | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.80 |
| deployProvIfDefaultsLanAid AID of LAN | column | ADVA-MIBEntityIndex | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.81 |
| deployProvIfDefaultsAprHighThreshold Automatic Power Reduction High Threshold | column | 0.1 dBm SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.82 |
| deployProvIfDefaultsPumpPower Total raman pump power | column | 0.2 dBm Integer32 | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.83 |
| deployProvIfDefaultsIpType Type of IP configuration | column | FspR7IpType | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.84 |
| deployProvIfDefaultsWdmRxChannel Configuration of Rx optical channel | column | FspR7ChannelIdentifier | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.85 |
| deployProvIfDefaultsSigDegThresSonetSection Bit-Error-Based Degradation Definition for SONET (standard integration period) | column | FspR7BERThresholdSection | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.86 |
| deployProvIfDefaultsSigDegThresSdhSection Block-Error-Based Degradation Definition for SDH (standard integration period).
Defined as percentage Background Block Errors (30% default) evaluated
over a defined period (SDPER-… | column | % Unsigned32 | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.87 |
| deployProvIfDefaultsSigDegPeriodSdhSection Provisionable Signal Degrade Integration Period for SDH | column | s Unsigned32 | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.88 |
| deployProvIfDefaultsDispersionMode Dispersion Compensation Mode | column | FspR7DispersionModes | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.89 |
| deployProvIfDefaultsLaserOffDelayFunction A configuration request for the Laser Off Delay function. This function
delays turning off the laser as a consequent action to a defect. | column | ADVA-MIBEnableState | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.9 |
| deployProvIfDefaultsDispersionSetting Dispersion setting of dispersion comensating module | column | ps/nm Integer32 | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.90 |
| deployProvIfDefaultsOffset Sets the offset for the mean optical power for power equalization in ROADM | column | 0.1 dB Integer32 | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.91 |
| deployProvIfDefaultsFunction Interface Function | column | FspR7InterfaceFunction | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.92 |
| deployProvIfDefaultsPortMode Port Mode | column | FspR7PortMode | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.93 |
| deployProvIfDefaultsPortRole ADVA cloud Port Roles | column | FspR7PortRole | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.94 |
| deployProvIfDefaultsUtag If untagged frames shall be enabled on this port or not. | column | FspR7UntaggedFrames | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.95 |
| deployProvIfDefaultsPvid Default VLAN ID (both STAG/CTAG mode) in case UTAG is enabled | column | Unsigned32 | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.96 |
| deployProvIfDefaultsPriority Default PCP in case UTAG is Enabled. The Prio may be remapped in the EVC. | column | Unsigned32 | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.97 |
| deployProvIfDefaultsStagType TAG type field | column | FspR7SnmpHexString | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.98 |
| deployProvIfDefaultsCac Enable of CAC | column | FspR7L2CacEnable | .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.99 |