deployProvIfDefaultsTcmALevel

FspR7-MIB · .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.12
MIB view Table view

Object

column ADVA-MIBOtnTcmLevel 
Configuration of TCMA level.

Context

MIB
FspR7-MIB
OID
.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.12
Type
column
Access
readonly
Status
current
Parent
deployProvIfDefaultsEntry
Table
deployProvIfDefaultsTable
Siblings
120

Syntax

ADVA-MIBOtnTcmLevel
Source
ADVA-MIBOtnTcmLevel
Base type
Enumeration

Values & Constraints

Type Values
0undefined
1tcm1
2tcm2
3tcm3
4tcm4
5tcm5
6tcm6
7disabled

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
deployProvIfDefaultsRowStatus
RowStatus
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.1
deployProvIfDefaultsFecType
Configuration of FEC type.
columnFspR7FecType.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.10
deployProvIfDefaultsMaxFrameSize
Max Frame Size
columnUnsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.100
deployProvIfDefaultsVethAid
Shows if PORT is a member in the LAG with the VETH AID
columnADVA-MIBEntityIndex.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.101
deployProvIfDefaultsLagPrio
Part of ID. Port pri that defines standby.
columnUnsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.102
deployProvIfDefaultsLagPortType
Type/Speed of connected ports in the LAG
columnFspR7LagPortType.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.103
deployProvIfDefaultsLagActivePorts
The amount of active ports in the LAG.
columnUnsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.104
deployProvIfDefaultsLacpMode
Enable of LACP state machine
columnFspR7LacpMode.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.105
deployProvIfDefaultsLagLoadBallanceSource
What source is used in the load balance calculation
columnFspR7LagLoadBallanceSource.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.106
deployProvIfDefaultsLacpTimeout
Timeout of the LACP
columnFspR7LacpTimeout.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.107
deployProvIfDefaultsFarEndCommunication
Used for Optojack plugs; Communication to Far End Plug is observed
columnFspR7YesNo.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.108
deployProvIfDefaultsEqlzAdmin
Scheduled Equalization Administration
columnFspR7EqlzAdminState.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.109
deployProvIfDefaultsTimingSource
The timing source for this interface. - internal: used in stand-alone, point-to-point topologies stand-alone (dedicated fiber operation). - loopTiming: e.g. used in point-to-point…
columnADVA-MIBSonetTimingSource.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.11
deployProvIfDefaultsTxOffDelay
Enable or disable TXOFFHOLD Period for Error Forwarding and LKDO-OFF Consequent Action.
columnFspR7EnableDisable.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.110
deployProvIfDefaultsOpuPayloadType
OPU Payload Type Indicator
columnFspR7OpuPayloadType.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.111
deployProvIfDefaultsOscOpticalSetpoint
Sets the OSC optical power
column0.1 dBm Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.112
deployProvIfDefaultsFiberBrand
Brand of fiber present in the fiber plant
columnFspR7FiberBrand.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.113
deployProvIfDefaultsTiltSet
Tilt setting as discrete values versus a range
columnFspR7TiltSet.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.114
deployProvIfDefaultsXfpDecisionThres
XFP Decision threshold setting
columnFspR7XfpDecisionThres.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.115
deployProvIfDefaultsAutoPTassignment
Auto assignment of ODU PT
columnFspR7ManualAuto.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.116
deployProvIfDefaultsTributarySlotMethod
Tributary Slot assignment method
columnFspR7ManualAuto.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.117
deployProvIfDefaultsOduTribPortNo
ODU Tributary Port Number
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.118
deployProvIfDefaultsOduTribTimeSlottNo
ODU Tributary slot number. Multiple values can be entered as a string, separated by commas or given as a range. For capabilities objects possible number of slots and valid range a…
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.119
deployProvIfDefaultsRevertiveMode
Revertive Protection Switching
columnApsRevertMode.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.120
deployProvIfDefaultsBip
Bit Interleaved Parity
columnFspR7Bip.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.125
deployProvIfDefaultsTcmBLevel
Configuration of TCMB level.
columnADVA-MIBOtnTcmLevel.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.13
deployProvIfDefaultsSigDegThresSonetLine
Bit-Error-Based Degradation Definition for SONET (standard integration period)
columnFspR7BERThreshold.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.14
deployProvIfDefaultsSigDegThresSdhMs
Block-Error-Based Degradation Definition for SDH (standard integration period). Defined as percentage Background Block Errors (30% default) evaluated over a defined period (SDPER-…
column% Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.15
deployProvIfDefaultsSignalDegradePeriod
The measurement period in seconds used together with the deployProvIfSigDegThresSdhRegSect based on the block error counting method. The valid range is 2..10, The default being 7.
columns Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.16
deployProvIfDefaultsAutonegotiation
Autonegotiation of the data rate
columnADVA-MIBEnableState.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.17
deployProvIfDefaultsBitrate
Provisioned data rate
columnFspR7Bitrate.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.18
deployProvIfDefaultsDuplex
Duplex Mode Provision.
columnADVA-MIBEthDuplexMode.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.19
deployProvIfDefaultsForceDestroy
Forced Destroy
columnFspR7ForcedStatus.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.2
deployProvIfDefaultsFlowControl
Flow Control mechanism
columnFspR7FlowControlMode.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.20
deployProvIfDefaultsOtnStuffing
Indicates if bit/byte stuffing is used in the transport signal.
columnFspR7Stuff.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.21
deployProvIfDefaultsSigDegThresOtu
Background-Block-Error-Based Signal Degradation Definition for OTU
column% Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.22
deployProvIfDefaultsSigDegPeriodOtu
Integration Period for Signal degrade
columns Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.23
deployProvIfDefaultsSigDegThresOdu
Background-Block-Error-Based Signal Degradation Definition for ODU
column% Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.24
deployProvIfDefaultsSigDegPeriodOdu
Integration Period for Signal degrade
columns Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.25
deployProvIfDefaultsSigDegThresOduTcmA
Background-Block-Error-Based Signal Degradation Definition for TCM-A
column% Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.26
deployProvIfDefaultsSigDegPeriodOduTcmA
Integration Period for Signal degrade
columns Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.27
deployProvIfDefaultsSigDegThresOduTcmB
Background-Block-Error-Based Signal Degradation Definition for TCM-B
column% Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.28
deployProvIfDefaultsSigDegPeriodOduTcmB
Integration Period of TCMB Signal Segrade
columns Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.29
deployProvIfDefaultsType
The TYPE defines the transport service type as wrapper with wrapper layer termination OR else as payload
columnFspR7InterfaceType.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.3
deployProvIfDefaultsTilt
Change of optical channel power in dB over the complete transmission band
column0.1 dB Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.30
deployProvIfDefaultsGain
Gain.
columnFspR7Gain.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.31
deployProvIfDefaultsAdmin
The Adminstrative State.
columnFspR7AdminState.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.32
deployProvIfDefaultsAttenuationGradient
Attenuation Gradient Threshold on Receive Fiber. Applies to both TRMT and RCV directions; but threshold violation is reported for each direction separately by the 'tapping' alarms…
column0.1 dB/min Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.33
deployProvIfDefaultsSigDegThresReceiver
Signal Degrade Threshold on Receiver. Reported as ATTRMT-SDHT to far end.
column0.1 dB SNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.34
deployProvIfDefaultsTcmCLevel
Activation of Tandem Connection Monitoring Instance C
columnADVA-MIBOtnTcmLevel.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.35
deployProvIfDefaultsSigDegThresOduTcmC
Background-Block-Error-Based Signal Degradation Definition for TCM-C
column% Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.36
deployProvIfDefaultsSigDegPeriodOduTcmC
Integration Period of TCMC Signal Segrade
columns Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.37
deployProvIfDefaultsDisparityCorrection
Disparity correction
columnADVA-MIBEnableState.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.38
deployProvIfDefaultsIpAddr
IP Address assigned to LAN IP Interface
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.39
deployProvIfDefaultsPayload
The payload of the interface (inside a transport overhead). Relevant e. g. for OTN cards which wrap a payload into an OTU1/2 wrapper.
columnADVA-MIBOtnPayloadType.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.4
deployProvIfDefaultsIpMask
IP MASK assigned to LAN IP Interface
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.40
deployProvIfDefaultsOspf
OSPF Routing (Dynamic)
columnFspR7OspfMode.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.41
deployProvIfDefaultsMetric
Routing Metric
columnUnsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.42
deployProvIfDefaultsAreaId
OSPF Area ID for IP Interface
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.43
deployProvIfDefaultsTraceFormSonetSection
Byte-Length of Trace Compared to Expected
columnADVA-MIBSonetTraceForm.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.44
deployProvIfDefaultsTraceExpectedSonetSection
Expected Sec/RS trace. NULL TRACE implies that no trace comparison is made.
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.45
deployProvIfDefaultsTraceTransmitSonetSection
Sec/RS Trace to be Transmitted
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.46
deployProvIfDefaultsTimModeSonetSection
Detection of TIM Sonet Section Condition can be configured
columnADVA-MIBTimMode.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.47
deployProvIfDefaultsTraceExpectedOtu
Expected SAPI part of the OTU trace (15 character). NULL TRACE implies that no trace comparison is made.
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.48
deployProvIfDefaultsTraceTransmitSapiOtu
The transmitted SAPI part of the OTU trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.49
deployProvIfDefaultsBehaviour
The configured behaviour of the interface. If configured as a network interface, the interface will use a WDM laser.
columnFspR7PortBehaviour.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.5
deployProvIfDefaultsTraceTransmitDapiOtu
The transmitted DAPI part of the OTU trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.50
deployProvIfDefaultsTraceTransmitOpspOtu
The transmitted Operator Specific part of the OTU trace (32 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.51
deployProvIfDefaultsTimModeOtu
Detection of TIM-OTU Condition can be configured
columnADVA-MIBTimMode.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.52
deployProvIfDefaultsTraceExpectedOdu
Expected SAPI part of the ODU trace (15 character). NULL TRACE implies that no trace comparison is made.
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.53
deployProvIfDefaultsTraceTransmitSapiOdu
The transmitted SAPI part of the ODU trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.54
deployProvIfDefaultsTraceTransmitDapiOdu
The transmitted DAPI part of the ODU trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.55
deployProvIfDefaultsTraceTransmitOpspOdu
The transmitted Operator Specific part of the ODU trace (32 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.56
deployProvIfDefaultsTimModeOdu
Detection of TIM-ODU Condition can be configured
columnADVA-MIBTimMode.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.57
deployProvIfDefaultsTraceExpectedOduTcmA
Expected SAPI part of the TCMA trace (15 character). NULL TRACE-TCM implies that no trace comparison is made.
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.58
deployProvIfDefaultsTraceTransmitSapiOduTcmA
The transmitted SAPI part of the TCMA trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.59
deployProvIfDefaultsTerminationLevel
Signal Tremination Level of Intrusive Access to Header Information. Not used in 7.0, monitoring is one layer higher than TERM level, if applicable. All conditions detected on moni…
columnADVA-MIBOhTerminationLevel.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.6
deployProvIfDefaultsTraceTransmitDapiOduTcmA
The transmitted DAPI part of the TCMA trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.60
deployProvIfDefaultsTraceTransmitOpspOduTcmA
The transmitted Operator Specific part of the TCMA trace (32 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.61
deployProvIfDefaultsTimModeOduTcmA
Detection of TIM-TCMA Condition can be configured
columnADVA-MIBTimMode.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.62
deployProvIfDefaultsTraceExpectedOduTcmB
Expected SAPI part of the TCMB trace (15 character). NULL TRACE-TCM implies that no trace comparison is made.
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.63
deployProvIfDefaultsTraceTransmitSapiOduTcmB
The transmitted SAPI part of the TCMB trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.64
deployProvIfDefaultsTraceTransmitDapiOduTcmB
The transmitted DAPI part of the TCMB trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.65
deployProvIfDefaultsTraceTransmitOpspOduTcmB
The transmitted Operator Specific part of the TCMB trace (32 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.66
deployProvIfDefaultsTimModeOduTcmB
Detection of TIM-TCMB Condition can be configured
columnADVA-MIBTimMode.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.67
deployProvIfDefaultsTraceExpectedOduTcmC
Expected SAPI part of the TCMC trace (15 character). NULL TRACE-TCM implies that no trace comparison is made.
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.68
deployProvIfDefaultsTraceTransmitSapiOduTcmC
The transmitted SAPI part of the TCMC trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.69
deployProvIfDefaultsAlsMode
A configuration request for the Automatic Laser Shutdown (ALS) function. Refer to FspR7AlsMode Textual Convention for details.
columnFspR7AlsMode.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.7
deployProvIfDefaultsTraceTransmitDapiOduTcmC
The transmitted DAPI part of the TCMC trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.70
deployProvIfDefaultsTraceTransmitOpspOduTcmC
The transmitted Operator Specific part of the TCMC trace (32 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.71
deployProvIfDefaultsTimModeOduTcmC
Detection of TIM-TCMC Condition can be configured
columnADVA-MIBTimMode.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.72
deployProvIfDefaultsChannelProvisioning
Channel
columnFspR7ChannelIdentifier.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.73
deployProvIfDefaultsVariableGain
Variable Gain of EDFA
column0.1 dB Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.74
deployProvIfDefaultsBand
The The optical band of the module.
columnFspR7OpticalBand.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.75
deployProvIfDefaultsSigDegThreshold
Threshold for number of errors (CV or CV+DE) in one second
columnUnsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.76
deployProvIfDefaultsSigDegPeriodIntegration
Integration Period for Signal degrade
columns Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.77
deployProvIfDefaultsVoaMode
VOA operating mode
columnFspR7VoaMode.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.78
deployProvIfDefaultsOpticalSetPoint
Sets the optical power for power equalization in ROADM or for channel power control in OPCM
column0.1 dBm Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.79
deployProvIfDefaultsErrorForwarding
A configuration request for the error forwarding function. Refer to FspR7ErrorFwdMode Textual Convention for details.
columnFspR7ErrorFwdMode.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.8
deployProvIfDefaultsVoaSetpoint
Sets the optical attenuation of VOA
column0.1 dB Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.80
deployProvIfDefaultsLanAid
AID of LAN
columnADVA-MIBEntityIndex.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.81
deployProvIfDefaultsAprHighThreshold
Automatic Power Reduction High Threshold
column0.1 dBm SNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.82
deployProvIfDefaultsPumpPower
Total raman pump power
column0.2 dBm Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.83
deployProvIfDefaultsIpType
Type of IP configuration
columnFspR7IpType.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.84
deployProvIfDefaultsWdmRxChannel
Configuration of Rx optical channel
columnFspR7ChannelIdentifier.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.85
deployProvIfDefaultsSigDegThresSonetSection
Bit-Error-Based Degradation Definition for SONET (standard integration period)
columnFspR7BERThresholdSection.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.86
deployProvIfDefaultsSigDegThresSdhSection
Block-Error-Based Degradation Definition for SDH (standard integration period). Defined as percentage Background Block Errors (30% default) evaluated over a defined period (SDPER-…
column% Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.87
deployProvIfDefaultsSigDegPeriodSdhSection
Provisionable Signal Degrade Integration Period for SDH
columns Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.88
deployProvIfDefaultsDispersionMode
Dispersion Compensation Mode
columnFspR7DispersionModes.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.89
deployProvIfDefaultsLaserOffDelayFunction
A configuration request for the Laser Off Delay function. This function delays turning off the laser as a consequent action to a defect.
columnADVA-MIBEnableState.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.9
deployProvIfDefaultsDispersionSetting
Dispersion setting of dispersion comensating module
columnps/nm Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.90
deployProvIfDefaultsOffset
Sets the offset for the mean optical power for power equalization in ROADM
column0.1 dB Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.91
deployProvIfDefaultsFunction
Interface Function
columnFspR7InterfaceFunction.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.92
deployProvIfDefaultsPortMode
Port Mode
columnFspR7PortMode.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.93
deployProvIfDefaultsPortRole
ADVA cloud Port Roles
columnFspR7PortRole.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.94
deployProvIfDefaultsUtag
If untagged frames shall be enabled on this port or not.
columnFspR7UntaggedFrames.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.95
deployProvIfDefaultsPvid
Default VLAN ID (both STAG/CTAG mode) in case UTAG is enabled
columnUnsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.96
deployProvIfDefaultsPriority
Default PCP in case UTAG is Enabled. The Prio may be remapped in the EVC.
columnUnsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.97
deployProvIfDefaultsStagType
TAG type field
columnFspR7SnmpHexString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.98
deployProvIfDefaultsCac
Enable of CAC
columnFspR7L2CacEnable.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.99