deployProvIfDefaultsSignalDegradePeriod

FspR7-MIB · .1.3.6.1.4.1.2544.1.11.2.5.4.3.1.16
MIB view Table view

Object

column s Unsigned32 
The measurement period in seconds used together with
the deployProvIfSigDegThresSdhRegSect based on the block error counting method.
The valid range is 2..10,
The default being 7.

Context

MIB
FspR7-MIB
OID
.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.16
Type
column
Access
readonly
Status
current
Units
s
Parent
deployProvIfDefaultsEntry
Table
deployProvIfDefaultsTable
Siblings
120

Syntax

s Unsigned32

Values & Constraints

Object Constraints
range: 2-10 range: 4294967295-4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
deployProvIfDefaultsRowStatus
RowStatus
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.1
deployProvIfDefaultsFecType
Configuration of FEC type.
columnFspR7FecType.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.10
deployProvIfDefaultsMaxFrameSize
Max Frame Size
columnUnsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.100
deployProvIfDefaultsVethAid
Shows if PORT is a member in the LAG with the VETH AID
columnADVA-MIBEntityIndex.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.101
deployProvIfDefaultsLagPrio
Part of ID. Port pri that defines standby.
columnUnsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.102
deployProvIfDefaultsLagPortType
Type/Speed of connected ports in the LAG
columnFspR7LagPortType.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.103
deployProvIfDefaultsLagActivePorts
The amount of active ports in the LAG.
columnUnsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.104
deployProvIfDefaultsLacpMode
Enable of LACP state machine
columnFspR7LacpMode.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.105
deployProvIfDefaultsLagLoadBallanceSource
What source is used in the load balance calculation
columnFspR7LagLoadBallanceSource.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.106
deployProvIfDefaultsLacpTimeout
Timeout of the LACP
columnFspR7LacpTimeout.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.107
deployProvIfDefaultsFarEndCommunication
Used for Optojack plugs; Communication to Far End Plug is observed
columnFspR7YesNo.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.108
deployProvIfDefaultsEqlzAdmin
Scheduled Equalization Administration
columnFspR7EqlzAdminState.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.109
deployProvIfDefaultsTimingSource
The timing source for this interface. - internal: used in stand-alone, point-to-point topologies stand-alone (dedicated fiber operation). - loopTiming: e.g. used in point-to-point…
columnADVA-MIBSonetTimingSource.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.11
deployProvIfDefaultsTxOffDelay
Enable or disable TXOFFHOLD Period for Error Forwarding and LKDO-OFF Consequent Action.
columnFspR7EnableDisable.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.110
deployProvIfDefaultsOpuPayloadType
OPU Payload Type Indicator
columnFspR7OpuPayloadType.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.111
deployProvIfDefaultsOscOpticalSetpoint
Sets the OSC optical power
column0.1 dBm Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.112
deployProvIfDefaultsFiberBrand
Brand of fiber present in the fiber plant
columnFspR7FiberBrand.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.113
deployProvIfDefaultsTiltSet
Tilt setting as discrete values versus a range
columnFspR7TiltSet.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.114
deployProvIfDefaultsXfpDecisionThres
XFP Decision threshold setting
columnFspR7XfpDecisionThres.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.115
deployProvIfDefaultsAutoPTassignment
Auto assignment of ODU PT
columnFspR7ManualAuto.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.116
deployProvIfDefaultsTributarySlotMethod
Tributary Slot assignment method
columnFspR7ManualAuto.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.117
deployProvIfDefaultsOduTribPortNo
ODU Tributary Port Number
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.118
deployProvIfDefaultsOduTribTimeSlottNo
ODU Tributary slot number. Multiple values can be entered as a string, separated by commas or given as a range. For capabilities objects possible number of slots and valid range a…
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.119
deployProvIfDefaultsTcmALevel
Configuration of TCMA level.
columnADVA-MIBOtnTcmLevel.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.12
deployProvIfDefaultsRevertiveMode
Revertive Protection Switching
columnApsRevertMode.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.120
deployProvIfDefaultsBip
Bit Interleaved Parity
columnFspR7Bip.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.125
deployProvIfDefaultsTcmBLevel
Configuration of TCMB level.
columnADVA-MIBOtnTcmLevel.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.13
deployProvIfDefaultsSigDegThresSonetLine
Bit-Error-Based Degradation Definition for SONET (standard integration period)
columnFspR7BERThreshold.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.14
deployProvIfDefaultsSigDegThresSdhMs
Block-Error-Based Degradation Definition for SDH (standard integration period). Defined as percentage Background Block Errors (30% default) evaluated over a defined period (SDPER-…
column% Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.15
deployProvIfDefaultsAutonegotiation
Autonegotiation of the data rate
columnADVA-MIBEnableState.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.17
deployProvIfDefaultsBitrate
Provisioned data rate
columnFspR7Bitrate.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.18
deployProvIfDefaultsDuplex
Duplex Mode Provision.
columnADVA-MIBEthDuplexMode.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.19
deployProvIfDefaultsForceDestroy
Forced Destroy
columnFspR7ForcedStatus.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.2
deployProvIfDefaultsFlowControl
Flow Control mechanism
columnFspR7FlowControlMode.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.20
deployProvIfDefaultsOtnStuffing
Indicates if bit/byte stuffing is used in the transport signal.
columnFspR7Stuff.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.21
deployProvIfDefaultsSigDegThresOtu
Background-Block-Error-Based Signal Degradation Definition for OTU
column% Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.22
deployProvIfDefaultsSigDegPeriodOtu
Integration Period for Signal degrade
columns Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.23
deployProvIfDefaultsSigDegThresOdu
Background-Block-Error-Based Signal Degradation Definition for ODU
column% Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.24
deployProvIfDefaultsSigDegPeriodOdu
Integration Period for Signal degrade
columns Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.25
deployProvIfDefaultsSigDegThresOduTcmA
Background-Block-Error-Based Signal Degradation Definition for TCM-A
column% Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.26
deployProvIfDefaultsSigDegPeriodOduTcmA
Integration Period for Signal degrade
columns Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.27
deployProvIfDefaultsSigDegThresOduTcmB
Background-Block-Error-Based Signal Degradation Definition for TCM-B
column% Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.28
deployProvIfDefaultsSigDegPeriodOduTcmB
Integration Period of TCMB Signal Segrade
columns Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.29
deployProvIfDefaultsType
The TYPE defines the transport service type as wrapper with wrapper layer termination OR else as payload
columnFspR7InterfaceType.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.3
deployProvIfDefaultsTilt
Change of optical channel power in dB over the complete transmission band
column0.1 dB Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.30
deployProvIfDefaultsGain
Gain.
columnFspR7Gain.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.31
deployProvIfDefaultsAdmin
The Adminstrative State.
columnFspR7AdminState.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.32
deployProvIfDefaultsAttenuationGradient
Attenuation Gradient Threshold on Receive Fiber. Applies to both TRMT and RCV directions; but threshold violation is reported for each direction separately by the 'tapping' alarms…
column0.1 dB/min Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.33
deployProvIfDefaultsSigDegThresReceiver
Signal Degrade Threshold on Receiver. Reported as ATTRMT-SDHT to far end.
column0.1 dB SNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.34
deployProvIfDefaultsTcmCLevel
Activation of Tandem Connection Monitoring Instance C
columnADVA-MIBOtnTcmLevel.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.35
deployProvIfDefaultsSigDegThresOduTcmC
Background-Block-Error-Based Signal Degradation Definition for TCM-C
column% Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.36
deployProvIfDefaultsSigDegPeriodOduTcmC
Integration Period of TCMC Signal Segrade
columns Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.37
deployProvIfDefaultsDisparityCorrection
Disparity correction
columnADVA-MIBEnableState.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.38
deployProvIfDefaultsIpAddr
IP Address assigned to LAN IP Interface
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.39
deployProvIfDefaultsPayload
The payload of the interface (inside a transport overhead). Relevant e. g. for OTN cards which wrap a payload into an OTU1/2 wrapper.
columnADVA-MIBOtnPayloadType.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.4
deployProvIfDefaultsIpMask
IP MASK assigned to LAN IP Interface
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.40
deployProvIfDefaultsOspf
OSPF Routing (Dynamic)
columnFspR7OspfMode.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.41
deployProvIfDefaultsMetric
Routing Metric
columnUnsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.42
deployProvIfDefaultsAreaId
OSPF Area ID for IP Interface
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.43
deployProvIfDefaultsTraceFormSonetSection
Byte-Length of Trace Compared to Expected
columnADVA-MIBSonetTraceForm.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.44
deployProvIfDefaultsTraceExpectedSonetSection
Expected Sec/RS trace. NULL TRACE implies that no trace comparison is made.
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.45
deployProvIfDefaultsTraceTransmitSonetSection
Sec/RS Trace to be Transmitted
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.46
deployProvIfDefaultsTimModeSonetSection
Detection of TIM Sonet Section Condition can be configured
columnADVA-MIBTimMode.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.47
deployProvIfDefaultsTraceExpectedOtu
Expected SAPI part of the OTU trace (15 character). NULL TRACE implies that no trace comparison is made.
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.48
deployProvIfDefaultsTraceTransmitSapiOtu
The transmitted SAPI part of the OTU trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.49
deployProvIfDefaultsBehaviour
The configured behaviour of the interface. If configured as a network interface, the interface will use a WDM laser.
columnFspR7PortBehaviour.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.5
deployProvIfDefaultsTraceTransmitDapiOtu
The transmitted DAPI part of the OTU trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.50
deployProvIfDefaultsTraceTransmitOpspOtu
The transmitted Operator Specific part of the OTU trace (32 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.51
deployProvIfDefaultsTimModeOtu
Detection of TIM-OTU Condition can be configured
columnADVA-MIBTimMode.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.52
deployProvIfDefaultsTraceExpectedOdu
Expected SAPI part of the ODU trace (15 character). NULL TRACE implies that no trace comparison is made.
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.53
deployProvIfDefaultsTraceTransmitSapiOdu
The transmitted SAPI part of the ODU trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.54
deployProvIfDefaultsTraceTransmitDapiOdu
The transmitted DAPI part of the ODU trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.55
deployProvIfDefaultsTraceTransmitOpspOdu
The transmitted Operator Specific part of the ODU trace (32 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.56
deployProvIfDefaultsTimModeOdu
Detection of TIM-ODU Condition can be configured
columnADVA-MIBTimMode.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.57
deployProvIfDefaultsTraceExpectedOduTcmA
Expected SAPI part of the TCMA trace (15 character). NULL TRACE-TCM implies that no trace comparison is made.
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.58
deployProvIfDefaultsTraceTransmitSapiOduTcmA
The transmitted SAPI part of the TCMA trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.59
deployProvIfDefaultsTerminationLevel
Signal Tremination Level of Intrusive Access to Header Information. Not used in 7.0, monitoring is one layer higher than TERM level, if applicable. All conditions detected on moni…
columnADVA-MIBOhTerminationLevel.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.6
deployProvIfDefaultsTraceTransmitDapiOduTcmA
The transmitted DAPI part of the TCMA trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.60
deployProvIfDefaultsTraceTransmitOpspOduTcmA
The transmitted Operator Specific part of the TCMA trace (32 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.61
deployProvIfDefaultsTimModeOduTcmA
Detection of TIM-TCMA Condition can be configured
columnADVA-MIBTimMode.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.62
deployProvIfDefaultsTraceExpectedOduTcmB
Expected SAPI part of the TCMB trace (15 character). NULL TRACE-TCM implies that no trace comparison is made.
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.63
deployProvIfDefaultsTraceTransmitSapiOduTcmB
The transmitted SAPI part of the TCMB trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.64
deployProvIfDefaultsTraceTransmitDapiOduTcmB
The transmitted DAPI part of the TCMB trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.65
deployProvIfDefaultsTraceTransmitOpspOduTcmB
The transmitted Operator Specific part of the TCMB trace (32 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.66
deployProvIfDefaultsTimModeOduTcmB
Detection of TIM-TCMB Condition can be configured
columnADVA-MIBTimMode.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.67
deployProvIfDefaultsTraceExpectedOduTcmC
Expected SAPI part of the TCMC trace (15 character). NULL TRACE-TCM implies that no trace comparison is made.
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.68
deployProvIfDefaultsTraceTransmitSapiOduTcmC
The transmitted SAPI part of the TCMC trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.69
deployProvIfDefaultsAlsMode
A configuration request for the Automatic Laser Shutdown (ALS) function. Refer to FspR7AlsMode Textual Convention for details.
columnFspR7AlsMode.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.7
deployProvIfDefaultsTraceTransmitDapiOduTcmC
The transmitted DAPI part of the TCMC trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.70
deployProvIfDefaultsTraceTransmitOpspOduTcmC
The transmitted Operator Specific part of the TCMC trace (32 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.71
deployProvIfDefaultsTimModeOduTcmC
Detection of TIM-TCMC Condition can be configured
columnADVA-MIBTimMode.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.72
deployProvIfDefaultsChannelProvisioning
Channel
columnFspR7ChannelIdentifier.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.73
deployProvIfDefaultsVariableGain
Variable Gain of EDFA
column0.1 dB Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.74
deployProvIfDefaultsBand
The The optical band of the module.
columnFspR7OpticalBand.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.75
deployProvIfDefaultsSigDegThreshold
Threshold for number of errors (CV or CV+DE) in one second
columnUnsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.76
deployProvIfDefaultsSigDegPeriodIntegration
Integration Period for Signal degrade
columns Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.77
deployProvIfDefaultsVoaMode
VOA operating mode
columnFspR7VoaMode.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.78
deployProvIfDefaultsOpticalSetPoint
Sets the optical power for power equalization in ROADM or for channel power control in OPCM
column0.1 dBm Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.79
deployProvIfDefaultsErrorForwarding
A configuration request for the error forwarding function. Refer to FspR7ErrorFwdMode Textual Convention for details.
columnFspR7ErrorFwdMode.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.8
deployProvIfDefaultsVoaSetpoint
Sets the optical attenuation of VOA
column0.1 dB Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.80
deployProvIfDefaultsLanAid
AID of LAN
columnADVA-MIBEntityIndex.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.81
deployProvIfDefaultsAprHighThreshold
Automatic Power Reduction High Threshold
column0.1 dBm SNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.82
deployProvIfDefaultsPumpPower
Total raman pump power
column0.2 dBm Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.83
deployProvIfDefaultsIpType
Type of IP configuration
columnFspR7IpType.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.84
deployProvIfDefaultsWdmRxChannel
Configuration of Rx optical channel
columnFspR7ChannelIdentifier.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.85
deployProvIfDefaultsSigDegThresSonetSection
Bit-Error-Based Degradation Definition for SONET (standard integration period)
columnFspR7BERThresholdSection.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.86
deployProvIfDefaultsSigDegThresSdhSection
Block-Error-Based Degradation Definition for SDH (standard integration period). Defined as percentage Background Block Errors (30% default) evaluated over a defined period (SDPER-…
column% Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.87
deployProvIfDefaultsSigDegPeriodSdhSection
Provisionable Signal Degrade Integration Period for SDH
columns Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.88
deployProvIfDefaultsDispersionMode
Dispersion Compensation Mode
columnFspR7DispersionModes.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.89
deployProvIfDefaultsLaserOffDelayFunction
A configuration request for the Laser Off Delay function. This function delays turning off the laser as a consequent action to a defect.
columnADVA-MIBEnableState.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.9
deployProvIfDefaultsDispersionSetting
Dispersion setting of dispersion comensating module
columnps/nm Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.90
deployProvIfDefaultsOffset
Sets the offset for the mean optical power for power equalization in ROADM
column0.1 dB Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.91
deployProvIfDefaultsFunction
Interface Function
columnFspR7InterfaceFunction.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.92
deployProvIfDefaultsPortMode
Port Mode
columnFspR7PortMode.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.93
deployProvIfDefaultsPortRole
ADVA cloud Port Roles
columnFspR7PortRole.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.94
deployProvIfDefaultsUtag
If untagged frames shall be enabled on this port or not.
columnFspR7UntaggedFrames.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.95
deployProvIfDefaultsPvid
Default VLAN ID (both STAG/CTAG mode) in case UTAG is enabled
columnUnsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.96
deployProvIfDefaultsPriority
Default PCP in case UTAG is Enabled. The Prio may be remapped in the EVC.
columnUnsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.97
deployProvIfDefaultsStagType
TAG type field
columnFspR7SnmpHexString.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.98
deployProvIfDefaultsCac
Enable of CAC
columnFspR7L2CacEnable.1.3.6.1.4.1.2544.1.11.2.5.4.3.1.99