deployProvApsCapApsType
FspR7-MIB ·
.1.3.6.1.4.1.2544.1.11.2.5.4.8.1.12
Object
column
ApsTypeCaps
The type of APS implemented in this protection group.
Context
- MIB
- FspR7-MIB
- OID
.1.3.6.1.4.1.2544.1.11.2.5.4.8.1.12- Type
- column
- Access
- readonly
- Status
- current
- Parent
- deployProvApsCapEntry
- Table
- deployProvApsCapTable
- Siblings
- 14
Syntax
ApsTypeCaps
- Source
- ApsTypeCaps
- Base type
Bits
Values & Constraints
Type Values
0 | capUndefined |
2 | capLine |
3 | capSncN |
4 | capSncI |
5 | capSncS |
6 | capEth |
7 | capPhys |
8 | capSncNPM |
9 | capSncNTCM |
10 | capSncISM |
11 | capMux |
12 | capPcs |
13 | capEthSncI |
14 | capEthSncN |
15 | capEthSncS |
16 | capEthSncT |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| deployProvApsCapRowStatus RowStatus | column | FspR7RowStatusCaps | .1.3.6.1.4.1.2544.1.11.2.5.4.8.1.1 |
| deployProvApsCapFarEndIp IP Address assigned to PPP Termination Point on Far-End NE. Default
is set by NE System on LINK establishment if FENDIPACPT = Y | column | FspR7YesNo | .1.3.6.1.4.1.2544.1.11.2.5.4.8.1.10 |
| deployProvApsCapPeerAid AID of Protection Partner involved in the protection group. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.11.2.5.4.8.1.11 |
| deployProvApsCapRevertMode Revertive Protection Switching | column | ApsRevertModeCaps | .1.3.6.1.4.1.2544.1.11.2.5.4.8.1.13 |
| deployProvApsCapWaitToRestore Wait to Restore | column | min FspR7Unsigned32Caps | .1.3.6.1.4.1.2544.1.11.2.5.4.8.1.14 |
| deployProvApsCapDirection Indicates whether the APS function is 'unidirectional' (single-ended)
or 'bidirectional' (dual-ended). | column | ApsDirectionCaps | .1.3.6.1.4.1.2544.1.11.2.5.4.8.1.15 |
| deployProvApsCapForceDestroy Forced Destroy | column | FspR7ForcedStatusCaps | .1.3.6.1.4.1.2544.1.11.2.5.4.8.1.2 |
| deployProvApsCapSDswitching This state controls whether the switch criteria for the APS group will
include the Signal Degrade alarm. | column | ADVA-MIBEnableStateCaps | .1.3.6.1.4.1.2544.1.11.2.5.4.8.1.3 |
| deployProvApsCapHoldOffTime This value controls the switch delay (0 to 10 seconds in
100ms steps) for the protection group. Changing the hold-off
time when the timer is active will not affect the active
time… | column | ADVA-MIBApsHoldoffTimeCaps | .1.3.6.1.4.1.2544.1.11.2.5.4.8.1.4 |
| deployProvApsCapProtectionMech The protection type of this protection group. | column | ADVA-MIBProtectionMechCaps | .1.3.6.1.4.1.2544.1.11.2.5.4.8.1.5 |
| deployProvApsCapWorkingAid AID of working port involved in the protection group. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.11.2.5.4.8.1.6 |
| deployProvApsCapProtectionAid AID of protection entity involved in the protection group. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.11.2.5.4.8.1.7 |
| deployProvApsCapSignalDegradeSwitching Switch Trigger Additionally on Signal Degrade Link Detection | column | ADVA-MIBEnableStateCaps | .1.3.6.1.4.1.2544.1.11.2.5.4.8.1.8 |
| deployProvApsCapSignalFailureSwitching Switch Trigger on Signal Failure Link Detection | column | ADVA-MIBEnableStateCaps | .1.3.6.1.4.1.2544.1.11.2.5.4.8.1.9 |