changeServiceDeployProvIfXfpDecisionThres

FspR7-MIB · .1.3.6.1.4.1.2544.1.11.2.5.4.40.1.99
MIB view Table view

Object

column r/w FspR7XfpDecisionThres 
XFP Decision threshold setting

Context

MIB
FspR7-MIB
OID
.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.99
Type
column
Access
readwrite
Status
current
Parent
changeServiceDeployProvIfEntry
Table
changeServiceDeployProvIfTable
Siblings
99

Syntax

FspR7XfpDecisionThres
Source
FspR7XfpDecisionThres
Base type
Enumeration

Values & Constraints

Type Values
0undefined
1standard
2forwardRaman

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
changeServiceDeployProvIfRowStatus
RowStatus
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.1
changeServiceDeployProvIfFecType
Configuration of FEC type.
columnFspR7FecType.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.10
changeServiceDeployProvIfBip
Bit Interleaved Parity
columnFspR7Bip.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.104
changeServiceDeployProvIfTimingSource
The timing source for this interface. - internal: used in stand-alone, point-to-point topologies stand-alone (dedicated fiber operation). - loopTiming: e.g. used in point-to-point…
columnADVA-MIBSonetTimingSource.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.11
changeServiceDeployProvIfTcmALevel
Configuration of TCMA level.
columnADVA-MIBOtnTcmLevel.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.12
changeServiceDeployProvIfTcmBLevel
Configuration of TCMB level.
columnADVA-MIBOtnTcmLevel.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.13
changeServiceDeployProvIfSigDegThresSonetLine
Bit-Error-Based Degradation Definition for SONET (standard integration period)
columnFspR7BERThreshold.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.14
changeServiceDeployProvIfSigDegThresSdhMs
Block-Error-Based Degradation Definition for SDH (standard integration period). Defined as percentage Background Block Errors (30% default) evaluated over a defined period (SDPER-…
column% Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.15
changeServiceDeployProvIfSignalDegradePeriod
The measurement period in seconds used together with the deployProvIfSigDegThresSdhRegSect based on the block error counting method. The valid range is 2..10, The default being 7.
columns Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.16
changeServiceDeployProvIfAutonegotiation
Autonegotiation of the data rate
columnADVA-MIBEnableState.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.17
changeServiceDeployProvIfBitrate
Provisioned data rate
columnFspR7Bitrate.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.18
changeServiceDeployProvIfDuplex
Duplex Mode Provision.
columnADVA-MIBEthDuplexMode.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.19
changeServiceDeployProvIfForceDestroy
Forced Destroy
columnFspR7ForcedStatus.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.2
changeServiceDeployProvIfFlowControl
Flow Control mechanism
columnFspR7FlowControlMode.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.20
changeServiceDeployProvIfOtnStuffing
Indicates if bit/byte stuffing is used in the transport signal.
columnFspR7Stuff.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.21
changeServiceDeployProvIfSigDegThresOtu
Background-Block-Error-Based Signal Degradation Definition for OTU
column% Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.22
changeServiceDeployProvIfSigDegPeriodOtu
Integration Period for Signal degrade
columns Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.23
changeServiceDeployProvIfSigDegThresOdu
Background-Block-Error-Based Signal Degradation Definition for ODU
column% Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.24
changeServiceDeployProvIfSigDegPeriodOdu
Integration Period for Signal degrade
columns Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.25
changeServiceDeployProvIfSigDegThresOduTcmA
Background-Block-Error-Based Signal Degradation Definition for TCM-A
column% Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.26
changeServiceDeployProvIfSigDegPeriodOduTcmA
Integration Period for Signal degrade
columns Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.27
changeServiceDeployProvIfSigDegThresOduTcmB
Background-Block-Error-Based Signal Degradation Definition for TCM-B
column% Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.28
changeServiceDeployProvIfSigDegPeriodOduTcmB
Integration Period of TCMB Signal Segrade
columns Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.29
changeServiceDeployProvIfType
The TYPE defines the transport service type as wrapper with wrapper layer termination OR else as payload
columnFspR7InterfaceType.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.3
changeServiceDeployProvIfTilt
Change of optical channel power in dB over the complete transmission band
column0.1 dB Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.30
changeServiceDeployProvIfGain
Gain.
columnFspR7Gain.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.31
changeServiceDeployProvIfAdmin
The Adminstrative State.
columnFspR7AdminState.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.32
changeServiceDeployProvIfAttenuationGradient
Attenuation Gradient Threshold on Receive Fiber. Applies to both TRMT and RCV directions; but threshold violation is reported for each direction separately by the 'tapping' alarms…
column0.1 dB/min Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.33
changeServiceDeployProvIfSigDegThresReceiver
Signal Degrade Threshold on Receiver. Reported as ATTRMT-SDHT to far end.
column0.1 dB SNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.34
changeServiceDeployProvIfTcmCLevel
Activation of Tandem Connection Monitoring Instance C
columnADVA-MIBOtnTcmLevel.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.35
changeServiceDeployProvIfSigDegThresOduTcmC
Background-Block-Error-Based Signal Degradation Definition for TCM-C
column% Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.36
changeServiceDeployProvIfSigDegPeriodOduTcmC
Integration Period of TCMC Signal Segrade
columns Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.37
changeServiceDeployProvIfDisparityCorrection
Disparity correction
columnADVA-MIBEnableState.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.38
changeServiceDeployProvIfIpAddr
IP Address assigned to LAN IP Interface
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.39
changeServiceDeployProvIfPayload
The payload of the interface (inside a transport overhead). Relevant e. g. for OTN cards which wrap a payload into an OTU1/2 wrapper.
columnADVA-MIBOtnPayloadType.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.4
changeServiceDeployProvIfIpMask
IP MASK assigned to LAN IP Interface
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.40
changeServiceDeployProvIfOspf
OSPF Routing (Dynamic)
columnFspR7OspfMode.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.41
changeServiceDeployProvIfMetric
Routing Metric
columnUnsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.42
changeServiceDeployProvIfAreaId
OSPF Area ID for IP Interface
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.43
changeServiceDeployProvIfTraceFormSonetSection
Byte-Length of Trace Compared to Expected
columnADVA-MIBSonetTraceForm.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.44
changeServiceDeployProvIfTraceExpectedSonetSection
Expected Sec/RS trace. NULL TRACE implies that no trace comparison is made.
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.45
changeServiceDeployProvIfTraceTransmitSonetSection
Sec/RS Trace to be Transmitted
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.46
changeServiceDeployProvIfTimModeSonetSection
Detection of TIM Sonet Section Condition can be configured
columnADVA-MIBTimMode.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.47
changeServiceDeployProvIfTraceExpectedOtu
Expected SAPI part of the OTU trace (15 character). NULL TRACE implies that no trace comparison is made.
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.48
changeServiceDeployProvIfTraceTransmitSapiOtu
The transmitted SAPI part of the OTU trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.49
changeServiceDeployProvIfBehaviour
The configured behaviour of the interface. If configured as a network interface, the interface will use a WDM laser.
columnFspR7PortBehaviour.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.5
changeServiceDeployProvIfTraceTransmitDapiOtu
The transmitted DAPI part of the OTU trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.50
changeServiceDeployProvIfTraceTransmitOpspOtu
The transmitted Operator Specific part of the OTU trace (32 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.51
changeServiceDeployProvIfTimModeOtu
Detection of TIM-OTU Condition can be configured
columnADVA-MIBTimMode.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.52
changeServiceDeployProvIfTraceExpectedOdu
Expected SAPI part of the ODU trace (15 character). NULL TRACE implies that no trace comparison is made.
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.53
changeServiceDeployProvIfTraceTransmitSapiOdu
The transmitted SAPI part of the ODU trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.54
changeServiceDeployProvIfTraceTransmitDapiOdu
The transmitted DAPI part of the ODU trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.55
changeServiceDeployProvIfTraceTransmitOpspOdu
The transmitted Operator Specific part of the ODU trace (32 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.56
changeServiceDeployProvIfTimModeOdu
Detection of TIM-ODU Condition can be configured
columnADVA-MIBTimMode.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.57
changeServiceDeployProvIfTraceExpectedOduTcmA
Expected SAPI part of the TCMA trace (15 character). NULL TRACE-TCM implies that no trace comparison is made.
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.58
changeServiceDeployProvIfTraceTransmitSapiOduTcmA
The transmitted SAPI part of the TCMA trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.59
changeServiceDeployProvIfTerminationLevel
Signal Tremination Level of Intrusive Access to Header Information. Not used in 7.0, monitoring is one layer higher than TERM level, if applicable. All conditions detected on moni…
columnADVA-MIBOhTerminationLevel.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.6
changeServiceDeployProvIfTraceTransmitDapiOduTcmA
The transmitted DAPI part of the TCMA trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.60
changeServiceDeployProvIfTraceTransmitOpspOduTcmA
The transmitted Operator Specific part of the TCMA trace (32 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.61
changeServiceDeployProvIfTimModeOduTcmA
Detection of TIM-TCMA Condition can be configured
columnADVA-MIBTimMode.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.62
changeServiceDeployProvIfTraceExpectedOduTcmB
Expected SAPI part of the TCMB trace (15 character). NULL TRACE-TCM implies that no trace comparison is made.
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.63
changeServiceDeployProvIfTraceTransmitSapiOduTcmB
The transmitted SAPI part of the TCMB trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.64
changeServiceDeployProvIfTraceTransmitDapiOduTcmB
The transmitted DAPI part of the TCMB trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.65
changeServiceDeployProvIfTraceTransmitOpspOduTcmB
The transmitted Operator Specific part of the TCMB trace (32 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.66
changeServiceDeployProvIfTimModeOduTcmB
Detection of TIM-TCMB Condition can be configured
columnADVA-MIBTimMode.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.67
changeServiceDeployProvIfTraceExpectedOduTcmC
Expected SAPI part of the TCMC trace (15 character). NULL TRACE-TCM implies that no trace comparison is made.
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.68
changeServiceDeployProvIfTraceTransmitSapiOduTcmC
The transmitted SAPI part of the TCMC trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.69
changeServiceDeployProvIfAlsMode
A configuration request for the Automatic Laser Shutdown (ALS) function. Refer to FspR7AlsMode Textual Convention for details.
columnFspR7AlsMode.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.7
changeServiceDeployProvIfTraceTransmitDapiOduTcmC
The transmitted DAPI part of the TCMC trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.70
changeServiceDeployProvIfTraceTransmitOpspOduTcmC
The transmitted Operator Specific part of the TCMC trace (32 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.71
changeServiceDeployProvIfTimModeOduTcmC
Detection of TIM-TCMC Condition can be configured
columnADVA-MIBTimMode.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.72
changeServiceDeployProvIfChannelProvisioning
Channel
columnFspR7ChannelIdentifier.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.73
changeServiceDeployProvIfVariableGain
Variable Gain of EDFA
column0.1 dB Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.74
changeServiceDeployProvIfBand
The The optical band of the module.
columnFspR7OpticalBand.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.75
changeServiceDeployProvIfSigDegThreshold
Threshold for number of errors (CV or CV+DE) in one second
columnUnsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.76
changeServiceDeployProvIfSigDegPeriodIntegration
Integration Period for Signal degrade
columns Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.77
changeServiceDeployProvIfVoaMode
VOA operating mode
columnFspR7VoaMode.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.78
changeServiceDeployProvIfOpticalSetPoint
Sets the optical power for power equalization in ROADM or for channel power control in OPCM
column0.1 dBm Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.79
changeServiceDeployProvIfErrorForwarding
A configuration request for the error forwarding function. Refer to FspR7ErrorFwdMode Textual Convention for details.
columnFspR7ErrorFwdMode.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.8
changeServiceDeployProvIfVoaSetpoint
Sets the optical attenuation of VOA
column0.1 dB Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.80
changeServiceDeployProvIfLanAid
AID of LAN
columnADVA-MIBEntityIndex.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.81
changeServiceDeployProvIfAprHighThreshold
Automatic Power Reduction High Threshold
column0.1 dBm SNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.82
changeServiceDeployProvIfPumpPower
Total raman pump power
column0.2 dBm Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.83
changeServiceDeployProvIfWdmRxChannel
Configuration of Rx optical channel
columnFspR7ChannelIdentifier.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.84
changeServiceDeployProvIfSigDegThresSonetSection
Bit-Error-Based Degradation Definition for SONET (standard integration period)
columnFspR7BERThresholdSection.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.85
changeServiceDeployProvIfSigDegThresSdhSection
Block-Error-Based Degradation Definition for SDH (standard integration period). Defined as percentage Background Block Errors (30% default) evaluated over a defined period (SDPER-…
column% Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.86
changeServiceDeployProvIfSigDegPeriodSdhSection
Provisionable Signal Degrade Integration Period for SDH
columns Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.87
changeServiceDeployProvIfDispersionMode
Dispersion Compensation Mode
columnFspR7DispersionModes.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.88
changeServiceDeployProvIfDispersionSetting
Dispersion setting of dispersion comensating module
columnps/nm Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.89
changeServiceDeployProvIfLaserOffDelayFunction
A configuration request for the Laser Off Delay function. This function delays turning off the laser as a consequent action to a defect.
columnADVA-MIBEnableState.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.9
changeServiceDeployProvIfIpType
Type of IP configuration
columnFspR7IpType.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.90
changeServiceDeployProvIfOffset
Sets the offset for the mean optical power for power equalization in ROADM
column0.1 dB Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.91
changeServiceDeployProvIfFunction
Interface Function
columnFspR7InterfaceFunction.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.92
changeServiceDeployProvIfFarEndCommunication
Used for Optojack plugs; Communication to Far End Plug is observed
columnFspR7YesNo.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.93
changeServiceDeployProvIfEqlzAdmin
Scheduled Equalization Administration
columnFspR7EqlzAdminState.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.94
changeServiceDeployProvIfTxOffDelay
Enable or disable TXOFFHOLD Period for Error Forwarding and LKDO-OFF Consequent Action.
columnFspR7EnableDisable.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.95
changeServiceDeployProvIfOpuPayloadType
OPU Payload Type Indicator
columnFspR7OpuPayloadType.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.96
changeServiceDeployProvIfOscOpticalSetpoint
Sets the OSC optical power
column0.1 dBm Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.97
changeServiceDeployProvIfFiberBrand
Brand of fiber present in the fiber plant
columnFspR7FiberBrand.1.3.6.1.4.1.2544.1.11.2.5.4.40.1.98