changeServiceDeployProvIfDefaultsOscOpticalSetpoint

FspR7-MIB · .1.3.6.1.4.1.2544.1.11.2.5.4.42.1.97
MIB view Table view

Object

column 0.1 dBm Integer32 
Sets the OSC optical power

Context

MIB
FspR7-MIB
OID
.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.97
Type
column
Access
readonly
Status
current
Units
0.1 dBm
Parent
changeServiceDeployProvIfDefaultsEntry
Table
changeServiceDeployProvIfDefaultsTable
Siblings
99

Syntax

0.1 dBm Integer32

Values & Constraints

Object Constraints
range: -2147483648--2147483648 range: -250-50

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
changeServiceDeployProvIfDefaultsRowStatus
RowStatus
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.1
changeServiceDeployProvIfDefaultsFecType
Configuration of FEC type.
columnFspR7FecType.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.10
changeServiceDeployProvIfDefaultsBip
Bit Interleaved Parity
columnFspR7Bip.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.104
changeServiceDeployProvIfDefaultsTimingSource
The timing source for this interface. - internal: used in stand-alone, point-to-point topologies stand-alone (dedicated fiber operation). - loopTiming: e.g. used in point-to-point…
columnADVA-MIBSonetTimingSource.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.11
changeServiceDeployProvIfDefaultsTcmALevel
Configuration of TCMA level.
columnADVA-MIBOtnTcmLevel.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.12
changeServiceDeployProvIfDefaultsTcmBLevel
Configuration of TCMB level.
columnADVA-MIBOtnTcmLevel.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.13
changeServiceDeployProvIfDefaultsSigDegThresSonetLine
Bit-Error-Based Degradation Definition for SONET (standard integration period)
columnFspR7BERThreshold.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.14
changeServiceDeployProvIfDefaultsSigDegThresSdhMs
Block-Error-Based Degradation Definition for SDH (standard integration period). Defined as percentage Background Block Errors (30% default) evaluated over a defined period (SDPER-…
column% Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.15
changeServiceDeployProvIfDefaultsSignalDegradePeriod
The measurement period in seconds used together with the deployProvIfSigDegThresSdhRegSect based on the block error counting method. The valid range is 2..10, The default being 7.
columns Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.16
changeServiceDeployProvIfDefaultsAutonegotiation
Autonegotiation of the data rate
columnADVA-MIBEnableState.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.17
changeServiceDeployProvIfDefaultsBitrate
Provisioned data rate
columnFspR7Bitrate.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.18
changeServiceDeployProvIfDefaultsDuplex
Duplex Mode Provision.
columnADVA-MIBEthDuplexMode.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.19
changeServiceDeployProvIfDefaultsForceDestroy
Forced Destroy
columnFspR7ForcedStatus.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.2
changeServiceDeployProvIfDefaultsFlowControl
Flow Control mechanism
columnFspR7FlowControlMode.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.20
changeServiceDeployProvIfDefaultsOtnStuffing
Indicates if bit/byte stuffing is used in the transport signal.
columnFspR7Stuff.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.21
changeServiceDeployProvIfDefaultsSigDegThresOtu
Background-Block-Error-Based Signal Degradation Definition for OTU
column% Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.22
changeServiceDeployProvIfDefaultsSigDegPeriodOtu
Integration Period for Signal degrade
columns Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.23
changeServiceDeployProvIfDefaultsSigDegThresOdu
Background-Block-Error-Based Signal Degradation Definition for ODU
column% Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.24
changeServiceDeployProvIfDefaultsSigDegPeriodOdu
Integration Period for Signal degrade
columns Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.25
changeServiceDeployProvIfDefaultsSigDegThresOduTcmA
Background-Block-Error-Based Signal Degradation Definition for TCM-A
column% Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.26
changeServiceDeployProvIfDefaultsSigDegPeriodOduTcmA
Integration Period for Signal degrade
columns Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.27
changeServiceDeployProvIfDefaultsSigDegThresOduTcmB
Background-Block-Error-Based Signal Degradation Definition for TCM-B
column% Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.28
changeServiceDeployProvIfDefaultsSigDegPeriodOduTcmB
Integration Period of TCMB Signal Segrade
columns Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.29
changeServiceDeployProvIfDefaultsType
The TYPE defines the transport service type as wrapper with wrapper layer termination OR else as payload
columnFspR7InterfaceType.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.3
changeServiceDeployProvIfDefaultsTilt
Change of optical channel power in dB over the complete transmission band
column0.1 dB Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.30
changeServiceDeployProvIfDefaultsGain
Gain.
columnFspR7Gain.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.31
changeServiceDeployProvIfDefaultsAdmin
The Adminstrative State.
columnFspR7AdminState.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.32
changeServiceDeployProvIfDefaultsAttenuationGradient
Attenuation Gradient Threshold on Receive Fiber. Applies to both TRMT and RCV directions; but threshold violation is reported for each direction separately by the 'tapping' alarms…
column0.1 dB/min Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.33
changeServiceDeployProvIfDefaultsSigDegThresReceiver
Signal Degrade Threshold on Receiver. Reported as ATTRMT-SDHT to far end.
column0.1 dB SNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.34
changeServiceDeployProvIfDefaultsTcmCLevel
Activation of Tandem Connection Monitoring Instance C
columnADVA-MIBOtnTcmLevel.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.35
changeServiceDeployProvIfDefaultsSigDegThresOduTcmC
Background-Block-Error-Based Signal Degradation Definition for TCM-C
column% Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.36
changeServiceDeployProvIfDefaultsSigDegPeriodOduTcmC
Integration Period of TCMC Signal Segrade
columns Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.37
changeServiceDeployProvIfDefaultsDisparityCorrection
Disparity correction
columnADVA-MIBEnableState.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.38
changeServiceDeployProvIfDefaultsIpAddr
IP Address assigned to LAN IP Interface
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.39
changeServiceDeployProvIfDefaultsPayload
The payload of the interface (inside a transport overhead). Relevant e. g. for OTN cards which wrap a payload into an OTU1/2 wrapper.
columnADVA-MIBOtnPayloadType.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.4
changeServiceDeployProvIfDefaultsIpMask
IP MASK assigned to LAN IP Interface
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.40
changeServiceDeployProvIfDefaultsOspf
OSPF Routing (Dynamic)
columnFspR7OspfMode.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.41
changeServiceDeployProvIfDefaultsMetric
Routing Metric
columnUnsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.42
changeServiceDeployProvIfDefaultsAreaId
OSPF Area ID for IP Interface
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.43
changeServiceDeployProvIfDefaultsTraceFormSonetSection
Byte-Length of Trace Compared to Expected
columnADVA-MIBSonetTraceForm.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.44
changeServiceDeployProvIfDefaultsTraceExpectedSonetSection
Expected Sec/RS trace. NULL TRACE implies that no trace comparison is made.
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.45
changeServiceDeployProvIfDefaultsTraceTransmitSonetSection
Sec/RS Trace to be Transmitted
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.46
changeServiceDeployProvIfDefaultsTimModeSonetSection
Detection of TIM Sonet Section Condition can be configured
columnADVA-MIBTimMode.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.47
changeServiceDeployProvIfDefaultsTraceExpectedOtu
Expected SAPI part of the OTU trace (15 character). NULL TRACE implies that no trace comparison is made.
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.48
changeServiceDeployProvIfDefaultsTraceTransmitSapiOtu
The transmitted SAPI part of the OTU trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.49
changeServiceDeployProvIfDefaultsBehaviour
The configured behaviour of the interface. If configured as a network interface, the interface will use a WDM laser.
columnFspR7PortBehaviour.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.5
changeServiceDeployProvIfDefaultsTraceTransmitDapiOtu
The transmitted DAPI part of the OTU trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.50
changeServiceDeployProvIfDefaultsTraceTransmitOpspOtu
The transmitted Operator Specific part of the OTU trace (32 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.51
changeServiceDeployProvIfDefaultsTimModeOtu
Detection of TIM-OTU Condition can be configured
columnADVA-MIBTimMode.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.52
changeServiceDeployProvIfDefaultsTraceExpectedOdu
Expected SAPI part of the ODU trace (15 character). NULL TRACE implies that no trace comparison is made.
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.53
changeServiceDeployProvIfDefaultsTraceTransmitSapiOdu
The transmitted SAPI part of the ODU trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.54
changeServiceDeployProvIfDefaultsTraceTransmitDapiOdu
The transmitted DAPI part of the ODU trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.55
changeServiceDeployProvIfDefaultsTraceTransmitOpspOdu
The transmitted Operator Specific part of the ODU trace (32 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.56
changeServiceDeployProvIfDefaultsTimModeOdu
Detection of TIM-ODU Condition can be configured
columnADVA-MIBTimMode.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.57
changeServiceDeployProvIfDefaultsTraceExpectedOduTcmA
Expected SAPI part of the TCMA trace (15 character). NULL TRACE-TCM implies that no trace comparison is made.
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.58
changeServiceDeployProvIfDefaultsTraceTransmitSapiOduTcmA
The transmitted SAPI part of the TCMA trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.59
changeServiceDeployProvIfDefaultsTerminationLevel
Signal Tremination Level of Intrusive Access to Header Information. Not used in 7.0, monitoring is one layer higher than TERM level, if applicable. All conditions detected on moni…
columnADVA-MIBOhTerminationLevel.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.6
changeServiceDeployProvIfDefaultsTraceTransmitDapiOduTcmA
The transmitted DAPI part of the TCMA trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.60
changeServiceDeployProvIfDefaultsTraceTransmitOpspOduTcmA
The transmitted Operator Specific part of the TCMA trace (32 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.61
changeServiceDeployProvIfDefaultsTimModeOduTcmA
Detection of TIM-TCMA Condition can be configured
columnADVA-MIBTimMode.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.62
changeServiceDeployProvIfDefaultsTraceExpectedOduTcmB
Expected SAPI part of the TCMB trace (15 character). NULL TRACE-TCM implies that no trace comparison is made.
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.63
changeServiceDeployProvIfDefaultsTraceTransmitSapiOduTcmB
The transmitted SAPI part of the TCMB trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.64
changeServiceDeployProvIfDefaultsTraceTransmitDapiOduTcmB
The transmitted DAPI part of the TCMB trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.65
changeServiceDeployProvIfDefaultsTraceTransmitOpspOduTcmB
The transmitted Operator Specific part of the TCMB trace (32 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.66
changeServiceDeployProvIfDefaultsTimModeOduTcmB
Detection of TIM-TCMB Condition can be configured
columnADVA-MIBTimMode.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.67
changeServiceDeployProvIfDefaultsTraceExpectedOduTcmC
Expected SAPI part of the TCMC trace (15 character). NULL TRACE-TCM implies that no trace comparison is made.
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.68
changeServiceDeployProvIfDefaultsTraceTransmitSapiOduTcmC
The transmitted SAPI part of the TCMC trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.69
changeServiceDeployProvIfDefaultsAlsMode
A configuration request for the Automatic Laser Shutdown (ALS) function. Refer to FspR7AlsMode Textual Convention for details.
columnFspR7AlsMode.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.7
changeServiceDeployProvIfDefaultsTraceTransmitDapiOduTcmC
The transmitted DAPI part of the TCMC trace (15 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.70
changeServiceDeployProvIfDefaultsTraceTransmitOpspOduTcmC
The transmitted Operator Specific part of the TCMC trace (32 character)
columnOctetString.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.71
changeServiceDeployProvIfDefaultsTimModeOduTcmC
Detection of TIM-TCMC Condition can be configured
columnADVA-MIBTimMode.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.72
changeServiceDeployProvIfDefaultsChannelProvisioning
Channel
columnFspR7ChannelIdentifier.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.73
changeServiceDeployProvIfDefaultsVariableGain
Variable Gain of EDFA
column0.1 dB Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.74
changeServiceDeployProvIfDefaultsBand
The The optical band of the module.
columnFspR7OpticalBand.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.75
changeServiceDeployProvIfDefaultsSigDegThreshold
Threshold for number of errors (CV or CV+DE) in one second
columnUnsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.76
changeServiceDeployProvIfDefaultsSigDegPeriodIntegration
Integration Period for Signal degrade
columns Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.77
changeServiceDeployProvIfDefaultsVoaMode
VOA operating mode
columnFspR7VoaMode.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.78
changeServiceDeployProvIfDefaultsOpticalSetPoint
Sets the optical power for power equalization in ROADM or for channel power control in OPCM
column0.1 dBm Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.79
changeServiceDeployProvIfDefaultsErrorForwarding
A configuration request for the error forwarding function. Refer to FspR7ErrorFwdMode Textual Convention for details.
columnFspR7ErrorFwdMode.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.8
changeServiceDeployProvIfDefaultsVoaSetpoint
Sets the optical attenuation of VOA
column0.1 dB Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.80
changeServiceDeployProvIfDefaultsLanAid
AID of LAN
columnADVA-MIBEntityIndex.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.81
changeServiceDeployProvIfDefaultsAprHighThreshold
Automatic Power Reduction High Threshold
column0.1 dBm SNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.82
changeServiceDeployProvIfDefaultsPumpPower
Total raman pump power
column0.2 dBm Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.83
changeServiceDeployProvIfDefaultsWdmRxChannel
Configuration of Rx optical channel
columnFspR7ChannelIdentifier.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.84
changeServiceDeployProvIfDefaultsSigDegThresSonetSection
Bit-Error-Based Degradation Definition for SONET (standard integration period)
columnFspR7BERThresholdSection.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.85
changeServiceDeployProvIfDefaultsSigDegThresSdhSection
Block-Error-Based Degradation Definition for SDH (standard integration period). Defined as percentage Background Block Errors (30% default) evaluated over a defined period (SDPER-…
column% Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.86
changeServiceDeployProvIfDefaultsSigDegPeriodSdhSection
Provisionable Signal Degrade Integration Period for SDH
columns Unsigned32.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.87
changeServiceDeployProvIfDefaultsDispersionMode
Dispersion Compensation Mode
columnFspR7DispersionModes.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.88
changeServiceDeployProvIfDefaultsDispersionSetting
Dispersion setting of dispersion comensating module
columnps/nm Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.89
changeServiceDeployProvIfDefaultsLaserOffDelayFunction
A configuration request for the Laser Off Delay function. This function delays turning off the laser as a consequent action to a defect.
columnADVA-MIBEnableState.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.9
changeServiceDeployProvIfDefaultsIpType
Type of IP configuration
columnFspR7IpType.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.90
changeServiceDeployProvIfDefaultsOffset
Sets the offset for the mean optical power for power equalization in ROADM
column0.1 dB Integer32.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.91
changeServiceDeployProvIfDefaultsFunction
Interface Function
columnFspR7InterfaceFunction.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.92
changeServiceDeployProvIfDefaultsFarEndCommunication
Used for Optojack plugs; Communication to Far End Plug is observed
columnFspR7YesNo.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.93
changeServiceDeployProvIfDefaultsEqlzAdmin
Scheduled Equalization Administration
columnFspR7EqlzAdminState.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.94
changeServiceDeployProvIfDefaultsTxOffDelay
Enable or disable TXOFFHOLD Period for Error Forwarding and LKDO-OFF Consequent Action.
columnFspR7EnableDisable.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.95
changeServiceDeployProvIfDefaultsOpuPayloadType
OPU Payload Type Indicator
columnFspR7OpuPayloadType.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.96
changeServiceDeployProvIfDefaultsFiberBrand
Brand of fiber present in the fiber plant
columnFspR7FiberBrand.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.98
changeServiceDeployProvIfDefaultsXfpDecisionThres
XFP Decision threshold setting
columnFspR7XfpDecisionThres.1.3.6.1.4.1.2544.1.11.2.5.4.42.1.99