fsRipAggTable

FUTURESOFT-RIP2-MIB · .1.3.6.1.4.1.2076.75.1.18

Object

table

The (conceptual) table listing the router's
supernet routes.RIP advertises only supernet
routes on the speicified interface. And it
suppresses all routes which are subset of the supernet.

Context

MIB: FUTURESOFT-RIP2-MIB
OID: .1.3.6.1.4.1.2076.75.1.18
Type: table
Status: current
Parent: rip2GeneralGroup
Siblings: 25
Children: 1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
fsRip2Security A variable denotes the security level of RIP-2 in the system. The value `minimumSecurity` denotes that the RIP1 packets will be accepted even when authentication is in use. The va…	scalar	Enumeration	`.1.3.6.1.4.1.2076.75.1.1`
fsRip2Propagate Is propagation of static route is enabled or not. If it is enabled then routing protocols (like RIP) are allowed to include static routes in the update messages.	scalar	Enumeration	`.1.3.6.1.4.1.2076.75.1.10`
fsRip2MaxRoutes deprecated This object represents the Maximum number of Rip Routes that can be sent in RIP domain.	scalar	Integer32	`.1.3.6.1.4.1.2076.75.1.11`
fsRipTrcFlag Enables the tracing in the RIP. A 32 bit integer is used to store the Tracing level in the specified module. Different Tracing Levels - BIT 0 - Initialisation and Shutdown Trace. …	scalar	Integer32	`.1.3.6.1.4.1.2076.75.1.12`
fsRip2NBRTrustListTable This table contains a list of Router addresses from which you can receive RIP Packets	table	-	`.1.3.6.1.4.1.2076.75.1.13`
fsRip2IfConfTable A list of subnets which require separate configuration in RIP.	table	-	`.1.3.6.1.4.1.2076.75.1.14`
fsRipMd5AuthTable The MD5 Authentication table for RIP.	table	-	`.1.3.6.1.4.1.2076.75.1.15`
fsRip2NBRUnicastListTable This table contains a list of Router addresses from which you can receive RIP Packets	table	-	`.1.3.6.1.4.1.2076.75.1.16`
fsRip2LocalRoutingTable This table contain Local routing table entries	table	-	`.1.3.6.1.4.1.2076.75.1.17`
fsRipAdminStatus The administrative status of RIP in the router. The value 'enabled' denotes that the RIP Process is active; 'disabled' disables it on all inter-faces.	scalar	Enumeration	`.1.3.6.1.4.1.2076.75.1.19`
fsRip2Peers The maximum number of peers that can be in conversation with the RIP2 system simultaneously	scalar	Integer32	`.1.3.6.1.4.1.2076.75.1.2`
fsRipCryptoAuthTable The Crypto Authentication table for RIP.	table	-	`.1.3.6.1.4.1.2076.75.1.20`
fsRip2PeerTable A list of RIP Peers.	table	-	`.1.3.6.1.4.1.2076.75.1.21`
fsRip2LastAuthKeyLifetimeStatus A flag that decides whether the last authentication key on expiry, should take its lifetime to be infinite or not. If this object is set to true the last key on expiry resets its…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.2076.75.1.22`
fsRip2IfStatTable A list of subnets which require separate status monitoring in RIP.	table	-	`.1.3.6.1.4.1.2076.75.1.23`
fsRipRtCount The number of routes in a particular context	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2076.75.1.24`
fsRipSendVersion This object indicates the rip send version that is set for the router.ripVersion1 implies sending RIP updates compliant with RFC 1058. rip1Compatible implies broadcasting RIP-…	scalar	Enumeration	`.1.3.6.1.4.1.2076.75.1.25`
fsRipReceiveVersion This indicates which version of RIP updates are to be accepted. Note that rip2 and rip1OrRip2 implies reception of multicast packets.This object is set for the router.	scalar	Enumeration	`.1.3.6.1.4.1.2076.75.1.26`
fsRip2TrustNBRListEnable The status of neighbor list in the router. The value 'enabled' denotes that a list of router's IP address can be configured and RIP Packets from those router's will be processed …	scalar	Enumeration	`.1.3.6.1.4.1.2076.75.1.3`
fsRip2NumberOfDroppedPkts Number of RIP Packets dropped because of neighbor list check.	scalar	SNMPv2-SMICounter32	`.1.3.6.1.4.1.2076.75.1.4`
fsRip2SpacingEnable Whether spacing is enabled or not. If spacing is enabled, generation of periodic update packet will be split and send.	scalar	Enumeration	`.1.3.6.1.4.1.2076.75.1.5`
fsRip2AutoSummaryStatus This object specify the auto-summary status.If enabled, summary routes are sent in regular updates for both rip v1 and v2.If split hoizon is enabled, summary is sent only if a…	scalar	Enumeration	`.1.3.6.1.4.1.2076.75.1.6`
fsRip2RetransTimeoutInt The timeout interval to be used to retransmit the Update request packet or an unacknowledged update response packet.	scalar	Integer32	`.1.3.6.1.4.1.2076.75.1.7`
fsRip2MaxRetransmissions The maximum number of retransmissions of the update request and update response packets. If no response is received then the routes via the next hop router are marked unreachabl…	scalar	Integer32	`.1.3.6.1.4.1.2076.75.1.8`
fsRip2OverSubscriptionTimeout Over subscription timeout value as mentioned in RFC 2091.When a Circuit DOWN message is received from the circuit manager, this timer will be started for the specified timeout va…	scalar	Integer32	`.1.3.6.1.4.1.2076.75.1.9`

Child Objects