fsRipAdminStatus
FUTURESOFT-RIP2-MIB ·
.1.3.6.1.4.1.2076.75.1.19
Object
scalar
r/w
Enumeration
The administrative status of RIP in the router. The value 'enabled' denotes that the RIP Process is active; 'disabled' disables it on all inter-faces.
Context
- MIB
- FUTURESOFT-RIP2-MIB
- OID
.1.3.6.1.4.1.2076.75.1.19- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- rip2GeneralGroup
- Siblings
- 25
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsRip2Security A variable denotes the security level of RIP-2
in the system. The value `minimumSecurity` denotes
that the RIP1 packets will be accepted even when
authentication is in use. The va… | scalar | Enumeration | .1.3.6.1.4.1.2076.75.1.1 |
| fsRip2Propagate Is propagation of static route is enabled or not. If it
is enabled then routing protocols (like RIP) are allowed
to include static routes in the update messages. | scalar | Enumeration | .1.3.6.1.4.1.2076.75.1.10 |
| fsRip2MaxRoutes deprecated This object represents the Maximum number of Rip
Routes that can be sent in RIP domain. | scalar | Integer32 | .1.3.6.1.4.1.2076.75.1.11 |
| fsRipTrcFlag Enables the tracing in the RIP. A 32 bit integer
is used to store the Tracing level in the specified module.
Different Tracing Levels -
BIT 0 - Initialisation and Shutdown Trace.
… | scalar | Integer32 | .1.3.6.1.4.1.2076.75.1.12 |
| fsRip2NBRTrustListTable This table contains a list of Router addresses
from which you can receive RIP Packets | table | - | .1.3.6.1.4.1.2076.75.1.13 |
| fsRip2IfConfTable A list of subnets which require separate
configuration in RIP. | table | - | .1.3.6.1.4.1.2076.75.1.14 |
| fsRipMd5AuthTable The MD5 Authentication table for RIP. | table | - | .1.3.6.1.4.1.2076.75.1.15 |
| fsRip2NBRUnicastListTable This table contains a list of Router addresses
from which you can receive RIP Packets | table | - | .1.3.6.1.4.1.2076.75.1.16 |
| fsRip2LocalRoutingTable This table contain Local routing table entries | table | - | .1.3.6.1.4.1.2076.75.1.17 |
| fsRipAggTable The (conceptual) table listing the router's
supernet routes.RIP advertises only supernet
routes on the speicified interface. And it
suppresses all routes which are subset of the s… | table | - | .1.3.6.1.4.1.2076.75.1.18 |
| fsRip2Peers The maximum number of peers that can be in conversation
with the RIP2 system simultaneously | scalar | Integer32 | .1.3.6.1.4.1.2076.75.1.2 |
| fsRipCryptoAuthTable The Crypto Authentication table for RIP. | table | - | .1.3.6.1.4.1.2076.75.1.20 |
| fsRip2PeerTable A list of RIP Peers. | table | - | .1.3.6.1.4.1.2076.75.1.21 |
| fsRip2LastAuthKeyLifetimeStatus A flag that decides whether the last authentication key on expiry,
should take its lifetime to be infinite or not. If this object is set
to true the last key on expiry resets its… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.75.1.22 |
| fsRip2IfStatTable A list of subnets which require separate
status monitoring in RIP. | table | - | .1.3.6.1.4.1.2076.75.1.23 |
| fsRipRtCount The number of routes in a particular context | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.75.1.24 |
| fsRipSendVersion This object indicates the rip send version that is set
for the router.ripVersion1 implies sending RIP updates compliant
with RFC 1058. rip1Compatible implies broadcasting RIP-… | scalar | Enumeration | .1.3.6.1.4.1.2076.75.1.25 |
| fsRipReceiveVersion This indicates which version of RIP updates
are to be accepted. Note that rip2 and
rip1OrRip2 implies reception of multicast
packets.This object is set for the router. | scalar | Enumeration | .1.3.6.1.4.1.2076.75.1.26 |
| fsRip2TrustNBRListEnable The status of neighbor list in the router.
The value 'enabled' denotes that a list of
router's IP address can be configured and
RIP Packets from those router's will be processed … | scalar | Enumeration | .1.3.6.1.4.1.2076.75.1.3 |
| fsRip2NumberOfDroppedPkts Number of RIP Packets dropped because of
neighbor list check. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2076.75.1.4 |
| fsRip2SpacingEnable Whether spacing is enabled or not. If spacing
is enabled, generation of periodic update packet
will be split and send. | scalar | Enumeration | .1.3.6.1.4.1.2076.75.1.5 |
| fsRip2AutoSummaryStatus This object specify the auto-summary status.If
enabled, summary routes are sent in regular updates for
both rip v1 and v2.If split hoizon is enabled, summary
is sent only if a… | scalar | Enumeration | .1.3.6.1.4.1.2076.75.1.6 |
| fsRip2RetransTimeoutInt The timeout interval to be used to retransmit the Update
request packet or an unacknowledged update response packet. | scalar | Integer32 | .1.3.6.1.4.1.2076.75.1.7 |
| fsRip2MaxRetransmissions The maximum number of retransmissions of the update request and
update response packets. If no response is received then the routes
via the next hop router are marked unreachabl… | scalar | Integer32 | .1.3.6.1.4.1.2076.75.1.8 |
| fsRip2OverSubscriptionTimeout Over subscription timeout value as mentioned in RFC 2091.When a
Circuit DOWN message is received from the circuit manager, this
timer will be started for the specified timeout va… | scalar | Integer32 | .1.3.6.1.4.1.2076.75.1.9 |