fsSntpAdminStatus
FSSNTP-MIB ·
.1.3.6.1.4.1.2076.149.1.1.3
Object
scalar
r/w
Enumeration
This object is used to enable or disable the sntp client module. All configuration will be acitve only when the SNTP module is enabled.
Context
- MIB
- FSSNTP-MIB
- OID
.1.3.6.1.4.1.2076.149.1.1.3- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- fsSntpScalars
- Siblings
- 18
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | disabled |
1 | enabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsSntpGlobalTrace This is used to enable Trace Statements in SNTP Module.
A four byte integer value is specified for enabling the level
of tracing.Each Bit in the four byte integer variable represe… | scalar | Integer32 | .1.3.6.1.4.1.10876.101.1.149.1.1.1 |
| fsSntpAuthKey Authentication key is cryptographic key that is used to implement NTP
Authentication | scalar | OctetString | .1.3.6.1.4.1.10876.101.1.149.1.1.10 |
| fsSntpTimeZone To set the system time zone with respect to UTC. ie plus indicates
forward time zone ( ahead of UTC Time eg: +05:30) and minus indicates
backward time zone (behind UTC time eg: -0… | scalar | OctetString | .1.3.6.1.4.1.10876.101.1.149.1.1.11 |
| fsSntpDSTStartTime Daylight saving time (DST) is a system of setting clocks ahead so
that both sunrise and sunset occur at a later hour. The effect is
additional daylight in the evening. Many countr… | scalar | OctetString | .1.3.6.1.4.1.10876.101.1.149.1.1.12 |
| fsSntpDSTEndTime Daylight saving time (DST) is a system of setting clocks ahead so
that both sunrise and sunset occur at a later hour. The effect is
additional daylight in the evening. Many countr… | scalar | OctetString | .1.3.6.1.4.1.10876.101.1.149.1.1.13 |
| fsSntpClientUptime The uptime of the SNTP client entity in seconds. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.1.149.1.1.14 |
| fsSntpClientStatus The status of the SNTP client as integer value. | scalar | Enumeration | .1.3.6.1.4.1.10876.101.1.149.1.1.15 |
| fsSntpServerReplyRxCount Number of SNTP server replies that has received by SNTP client. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.10876.101.1.149.1.1.16 |
| fsSntpClientReqTxCount Number of requests the SNTP client has Transmitted. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.10876.101.1.149.1.1.17 |
| fsSntpPktInDiscardCount Number of replies the SNTP client has rejected. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.10876.101.1.149.1.1.18 |
| fsSntpAuthKeyType This is used to indicate how the authentification key type must be interpreted. | scalar | Enumeration | .1.3.6.1.4.1.2076.149.1.1.19 |
| fsSntpGlobalDebug This is used to enable Debug statements in SNTP module.
A Four byte integer value is specified for enabling the
level of debugging. Each bit in the four byte integer
variable re… | scalar | Integer32 | .1.3.6.1.4.1.10876.101.1.149.1.1.2 |
| fsSntpClientVersion The SNTP client module can run in any one version 1, version 2,
version 3 or version 4. All the SNTP requests are sent out with the
current configured version number. When require… | scalar | Enumeration | .1.3.6.1.4.1.10876.101.1.149.1.1.4 |
| fsSntpClientAddressingMode unicast:
- SNTP client operates in a point-to-point fashion. A unicast
client sends a request to a designated server at its unicast address
and expects a reply from which it can… | scalar | Enumeration | .1.3.6.1.4.1.10876.101.1.149.1.1.5 |
| fsSntpClientPort The SNTP client module by default listens on well-know port number 123.
When required, the Administrator can change the SNTP Client port value
to non-default. | scalar | Integer32 | .1.3.6.1.4.1.10876.101.1.149.1.1.6 |
| fsSntpTimeDisplayFormat The administrator can view the system time in 12 hr AM/PM or 24
hours format. | scalar | Enumeration | .1.3.6.1.4.1.10876.101.1.149.1.1.7 |
| fsSntpAuthKeyId Key Identifier is an integer identifying the cryptographic key used
to generate the message-authentication code | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.1.149.1.1.8 |
| fsSntpAuthAlgorithm When the NTP authentication scheme is implemented, the Key Identifier
and Message Digest fields contain the message authentication code (MAC)
information. Message Digest-5 (MD5) a… | scalar | Enumeration | .1.3.6.1.4.1.10876.101.1.149.1.1.9 |