syncEIfPortQuality
FS-SWITCH-MIB ·
.1.3.6.1.4.1.27975.81.13.1.6
Object
column
Enumeration
Get the current received quality of port.
The meanings of the values are:
prs(1) - PRS traceable (ITU-T G.811);
prc(2) - Primary reference clock;
stu(3) - Synchronized Ƀ Traceability unknown;
ssua(4) - Type I or V slave clock
defined in ITU-T G.812;
tnc(5) - Traceable to transit node clock
(ITU-T G.812, type V);
st2(6) - Traceable to stratum 2
(ITU-T G.812, type II);
ssub(7) - Type VI slave clock defined in ITU-T G.812;
eec2(8) - EEC2 clock or st3 clock;
eec1(9) - EEC1 clock or SEC clock;
smc(10) - Traceable to SONET clock self timed;
st3e(11) - Traceable to stratum 3E
(ITU-T G.812, type III);
prov(12) - Provisionable by the network operator;
dnu(13) - Do not use this quality;
dus(14) - Do not use for synchronization;
na(15) - N/A(not receive)
Context
- MIB
- FS-SWITCH-MIB
- OID
.1.3.6.1.4.1.27975.81.13.1.6- Type
- column
- Access
- readonly
- Status
- current
- Parent
- syncEIfEntry
- Table
- syncEIfTable
- Siblings
- 12
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| syncEIfIndex Interface index which is able to apply ssm. | column | Integer32 | .1.3.6.1.4.1.27975.81.13.1.1 |
| syncEIFDNUgroup Add the port into DNU group. The range is 0 ~ 255.
value 0 is delete port from DNU group. | column | Integer32 | .1.3.6.1.4.1.27975.81.13.1.10 |
| syncEIfReplaceClockId Get or set the status of replace clockid.
The meanings of the values are:
enable(1) - Enable;
disable(2) - Disable | column | Enumeration | .1.3.6.1.4.1.27975.81.13.1.11 |
| syncEIfForcibleRxQL Get and set Rx quality of physical port.
The meanings of the values are:
prs(1) - PRS traceable (ITU-T G.811);
prc(2) - Primary reference clock;
stu(3) - Synchronized Ƀ T… | column | Enumeration | .1.3.6.1.4.1.27975.81.13.1.12 |
| syncEIfForcibleTxQL Get and set Tx quality of physical port.
The meanings of the values are:
prs(1) - PRS traceable (ITU-T G.811);
prc(2) - Primary reference clock;
stu(3) - Synchronized Ƀ T… | column | Enumeration | .1.3.6.1.4.1.27975.81.13.1.13 |
| syncEIfSyncEEnable Set whether the port is a synchronous port.
The meanings of the values are:
enable(1) - a synchronous port;
disable(2) - not a synchronous port | column | Enumeration | .1.3.6.1.4.1.27975.81.13.1.2 |
| syncEIfSyncEPduMode Set whether the interface can receive or send PDU.
The meanings of the values are:
rx(1) - receive PDU only;
tx(2) - send PDU only;
all(3) - receive and send PDU;
none-all… | column | Enumeration | .1.3.6.1.4.1.27975.81.13.1.3 |
| syncEIfPortPriority Set the port priority. The range is 1 ~ 255. | column | Integer32 | .1.3.6.1.4.1.27975.81.13.1.4 |
| syncEIfPortUp Get the status of whether the port is up.
The meanings of the values are:
enable(1) - Port is up;
disable(2) - Port is down | column | Enumeration | .1.3.6.1.4.1.27975.81.13.1.5 |
| syncEIfSendTimerState Get the status of Send timer.
The meanings of the values are:
enable(1) - Enable;
disable(2) - Disable | column | Enumeration | .1.3.6.1.4.1.27975.81.13.1.7 |
| syncEIfTimeoutTimerState Get the status of Timeout timer.
The meanings of the values are:
enable(1) - Enable;
disable(2) - Disable | column | Enumeration | .1.3.6.1.4.1.27975.81.13.1.8 |
| syncEIfSendQuality Get the current sending quality of port.
The meanings of the values are:
prs(1) - PRS traceable (ITU-T G.811);
prc(2) - Primary reference clock;
stu(3) - Synchronized Ƀ T… | column | Enumeration | .1.3.6.1.4.1.27975.81.13.1.9 |