efmOAMRemoteFailureDyingGasp
FS-SWITCH-MIB ·
.1.3.6.1.4.1.27975.84.1.1.20
Object
column
r/w
Enumeration
TRemote Failure Action Dying Gasp Event on an interface. The meanings of the values are:enable(1);disable(2).
Context
- MIB
- FS-SWITCH-MIB
- OID
.1.3.6.1.4.1.27975.84.1.1.20- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- efmOAMIfEntry
- Table
- efmOAMIfTable
- Siblings
- 20
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| efmOAMIfIndex Interface index. | column | Integer32 | .1.3.6.1.4.1.27975.84.1.1.1 |
| efmOAMLinkMonitorFrameWin Set size of frame event window in the range <10-600>. | column | Integer32 | .1.3.6.1.4.1.27975.84.1.1.10 |
| efmOAMLinkMonitorFrameSecHigh Set value of the High threshold for the number of errored frame-seconds. The meanings of the values are:
none(0) - no high threshold is configured;
Value of the high threshold <1-… | column | Integer32 | .1.3.6.1.4.1.27975.84.1.1.11 |
| efmOAMLinkMonitorFrameSecLow Set value of the Low threshold for the number of errored frame-seconds in the range <1-900>. | column | Integer32 | .1.3.6.1.4.1.27975.84.1.1.12 |
| efmOAMLinkMonitorFrameSecWin Set Window for frame-seconds events in the range <100-9000>. | column | Integer32 | .1.3.6.1.4.1.27975.84.1.1.13 |
| efmOAMLinkMonitorHighThreAction Set action when high threshold is detected.The meanings of the values are:
error-disable-interface(1) - Disable the interface when high threshold is exceeded;
none(2). | column | Enumeration | .1.3.6.1.4.1.27975.84.1.1.14 |
| efmOAMRemoteLoopbackSupported Set remote loopback on a interface. The meanings of the values are:
un-supported(2); supported(1). | column | Enumeration | .1.3.6.1.4.1.27975.84.1.1.15 |
| efmOAMRemoteLoopbackTimeout Set remote loopback on a interface.. | column | Integer32 | .1.3.6.1.4.1.27975.84.1.1.16 |
| efmOAMRemoteLoopbackState Set remote loopback state on a interface.. | column | Enumeration | .1.3.6.1.4.1.27975.84.1.1.17 |
| efmOAMTimeout Reset the LOCAL_LOST_LINK_TIMER and start an Ethernet OAM discovery process. | column | Integer32 | .1.3.6.1.4.1.27975.84.1.1.18 |
| efmOAMRemoteFailureCriticalEvent Remote Failure Action Critical Link Event on an interface.
The meanings of the values are:enable(1);disable(2). | column | Enumeration | .1.3.6.1.4.1.27975.84.1.1.19 |
| efmOAMEnable Enable the Ethernet OAM module on a port.The meanings of the values are:
enable(1);disable(2). | column | Enumeration | .1.3.6.1.4.1.27975.84.1.1.2 |
| efmOAMRemoteFailureLinkFailure Remote Failure Action Link Fault Event on an interface.
The meanings of the values are:enable(1);disable(2). | column | Enumeration | .1.3.6.1.4.1.27975.84.1.1.21 |
| efmOAMMode Set the DTE to active mode or passive mode.The meanings of the values are:
active(1);passive(2). | column | Enumeration | .1.3.6.1.4.1.27975.84.1.1.3 |
| efmOAMMinRate set the OAMPDU minimum number of PDUS per second. this timer in the range <1-10>. | column | Integer32 | .1.3.6.1.4.1.27975.84.1.1.4 |
| efmOAMMaxRate set the OAMPDU maximum number of PDUS per second. this timer in the range <1-10>. | column | Integer32 | .1.3.6.1.4.1.27975.84.1.1.5 |
| efmOAMLinkMonitorEn Turn on or off link monitoring on an interface.The meanings of the values are:
enable(1);disable(2). | column | Enumeration | .1.3.6.1.4.1.27975.84.1.1.6 |
| efmOAMLinkMonitorSupported Set link monitoring on an interface.The meanings of the values are:
supported(1);un-supported(2). | column | Enumeration | .1.3.6.1.4.1.27975.84.1.1.7 |
| efmOAMLinkMonitorFrameHigh Set value of the high threshold for errored frames. The meanings of the values are:
none(0) - no high threshold is configured;
Value of the high threshold <1-65535>. | column | Integer32 | .1.3.6.1.4.1.27975.84.1.1.8 |
| efmOAMLinkMonitorFrameLow Set value of the low threshold for errored frames in the range <0-65535>. | column | Integer32 | .1.3.6.1.4.1.27975.84.1.1.9 |