nnfrPvcIpAddr
FR-MIB ·
.1.3.6.1.4.1.562.73.1.1.1.16.2.1.4
Object
IP address to be configured for the PVC. PVC IP subnet Mask variable should also be configured alongwith this variable. A set on this variable will be successful only if the subnetmask is also set in the same request. To unconfigure the Ip address, a set is issued with the value of the ip address as 0.0.0.0
Context
- MIB
- FR-MIB
- OID
.1.3.6.1.4.1.562.73.1.1.1.16.2.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- nnfrPvcTableEntry
- Table
- nnfrPvcTable
- Siblings
- 17
Syntax
SNMPv2-SMIIpAddress
- Source
- SNMPv2-SMIIpAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nnfrPvcDlci Data Link Connection Identifier of the PVC. The value
ranges from 16 to 991. The Dlci is unique for a bundle
but Dlci numbers can be reused across bundles. | column | Integer32 | .1.3.6.1.4.1.562.73.1.1.1.16.2.1.1 |
| nnfrPvcPolicingBc Committed Burst ( bits ) in receive direction for PVC.
This variable can be configured only if policing is
enabled. | column | bps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.562.73.1.1.1.16.2.1.10 |
| nnfrPvcPolicingBe Excess burst ( bits ) in receive direction for PVC. This
variable can be configured only if policing enabled. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.562.73.1.1.1.16.2.1.11 |
| nnfrPvcShapingCir The committed information rate (in bits per second) to be
configured for the PVC. | column | bps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.562.73.1.1.1.16.2.1.12 |
| nnfrPvcShapingBcMax The maximum committed burst (bits) to be configured
for the PVC. | column | bps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.562.73.1.1.1.16.2.1.13 |
| nnfrPvcShapingBcMin The minimum committed burst (bits) to be configured
for the PVC. | column | bps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.562.73.1.1.1.16.2.1.14 |
| nnfrPvcShapingBe The excess burst (bits) to be configured for the PVC. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.562.73.1.1.1.16.2.1.15 |
| nnfrPvcDlciForSwitching Data Link Connection Identifier of the PVC. The
value for this variable ranges from 16 to 991.
frPvcBundleNameForSwitching should be set with
frPvcDlciForSwitching as an atomic … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.562.73.1.1.1.16.2.1.16 |
| nnfrPvcBundleNameForSwitching The name of the bundle configured for Switching. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.73.1.1.1.16.2.1.17 |
| nnfrPvcRowStatus To create a row set row status to a value
CreateAndGo(4), indexed by bundle Id and the
desired dlci number. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.562.73.1.1.1.16.2.1.18 |
| nnfrPvcEnable Enables PVC for given interface name and DLCI number. By
default PVC is enabled. Writing one(1) on this enables
PVC, zero (0) disables it. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.562.73.1.1.1.16.2.1.2 |
| nnfrPvcDescr Description for the configured PVC. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.73.1.1.1.16.2.1.3 |
| nnfrPvcIpSubnetMask Subnet mask to be configured alongwith PVC IP address.
This variable should be configured alongwith PVC IP
address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.562.73.1.1.1.16.2.1.5 |
| nnfrPvcRemoteIpAddr Remote IP address to be mapped for PVC | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.562.73.1.1.1.16.2.1.6 |
| nnfrPvcPolicingEnable This variable is to disable/enable policing for PVC.
Writing zero (0) on this disables policing for the
PVC. By default policing is enabled. | column | Enumeration | .1.3.6.1.4.1.562.73.1.1.1.16.2.1.7 |
| nnfrPvcPolicingDe If enabled, received frames that exceed policing
threshold, will be tagged with DE bit. This variable
can be configured only if policing is enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.562.73.1.1.1.16.2.1.8 |
| nnfrPvcPolicingCir Committed Information Rate( bits per second )
in receive direction for PVC. This variable can be
configured only if policing is enabled. | column | bps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.562.73.1.1.1.16.2.1.9 |