frAtmIwfConnAdminStatus

FR-ATM-PVC-SERVICE-IWF-MIB · .1.3.6.1.2.1.86.1.2.1.8

Object

column r/w Enumeration

The desired operational state for this FR/ATM
interworked connection.
              
up(1)       = Activate the connection. Before the
              activation can be completed, the
              OperStatus/AdminStatus of the
              corresponding endpoints MUST be
              'up(1)'.  The activation of the
              corresponding endpoints MAY occur as
              a side-effect of activating the
              FR/ATM IWF cross-connection.
              
down(2)     = Deactivate the connection. Before
              the deactivation can be completed,
              the atmVclAdminStatus of the
              corresponding ATM endpoint MUST be
              'down(2)'.  The deactivation of the
              
              ATM endpoint MAY occur as a
              side-effect of deactivating the
              FR/ATM IWF cross-connection.

Context

MIB: FR-ATM-PVC-SERVICE-IWF-MIB
OID: .1.3.6.1.2.1.86.1.2.1.8
Type: column
Access: readwrite
Status: current
Parent: frAtmIwfConnectionEntry
Table: frAtmIwfConnectionTable
Siblings: 18

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	up
`2`	down

Related Objects

Sibling Objects

Object	Type	Syntax	OID
frAtmIwfConnIndex A unique value for each point-to-point or point- to-multipoint connection. The manager obtains the frAtmIwfConnIndex value by reading the frAtmIwfConnIndexNext obj…	column	Integer32	`.1.3.6.1.2.1.86.1.2.1.1`
frAtmIwfConnAtm2FrLastChange The value of sysUpTime at the time this interworking connection entered its current operational state in the ATM to FR direction. If the current state was entered prior to the la…	column	SNMPv2-TCTimeStamp	`.1.3.6.1.2.1.86.1.2.1.10`
frAtmIwfConnFr2AtmOperStatus The current operational state of this interworking connection in the frame relay to ATM direction.	column	Enumeration	`.1.3.6.1.2.1.86.1.2.1.11`
frAtmIwfConnFr2AtmLastChange The value of sysUpTime at the time this interworking connection entered its current operational state in the FR to ATM direction. If the current state was entered prior to the la…	column	SNMPv2-TCTimeStamp	`.1.3.6.1.2.1.86.1.2.1.12`
frAtmIwfConnectionDescriptor The value represents a pointer to the relevant descriptor in the IWF descriptor table. An attempt to set this value to an inactive or non- existent row in the Connection Descript…	column	SNMPv2-SMIInteger32	`.1.3.6.1.2.1.86.1.2.1.13`
frAtmIwfConnFailedFrameTranslate This object counts the number of frames discarded by the IWF because, while operating in Translation Mode, the IWF is unable to decode the incoming frame payload header according …	column	Frames SNMPv2-SMICounter32	`.1.3.6.1.2.1.86.1.2.1.14`
frAtmIwfConnOverSizedFrames Count of frames discarded by the IWF because the frame is too large to be processed by the AAL5 segmentation procedure. Specifically, the frame does not conform to…	column	Frames SNMPv2-SMICounter32	`.1.3.6.1.2.1.86.1.2.1.15`
frAtmIwfConnFailedAal5PduTranslate This attribute counts the number of AAL5 PDUs discarded by the IWF because, while operating in Translation Mode, the IWF is unable to decode the incoming AAL5 PDU payload header a…	column	PDUs SNMPv2-SMICounter32	`.1.3.6.1.2.1.86.1.2.1.16`
frAtmIwfConnOverSizedSDUs Count of AAL5 SDUs discarded by the IWF because the SDU is too large to be forwarded on the frame relay segment of the connection. Specifically, the frame does not conform to the…	column	SDUs SNMPv2-SMICounter32	`.1.3.6.1.2.1.86.1.2.1.17`
frAtmIwfConnCrcErrors The number of AAL5 CPCS PDUs received with CRC-32 errors on this AAL5 VCC at the IWF. AAL5 PDUs are received in the ATM to frame relay direction of the PVC.	column	PDUs SNMPv2-SMICounter32	`.1.3.6.1.2.1.86.1.2.1.18`
frAtmIwfConnSarTimeOuts The number of partially re-assembled AAL5 CPCS PDUs which were discarded on this AAL5 VCC at the IWF because they were not fully re-assembled within the required time period. If …	column	PDUs SNMPv2-SMICounter32	`.1.3.6.1.2.1.86.1.2.1.19`
frAtmIwfConnAtmPort The index in the ifTable that identifies the ATM port for this interworking connection.	column	IF-MIBInterfaceIndex	`.1.3.6.1.2.1.86.1.2.1.2`
frAtmIwfConnVpi The VPI of the ATM PVC end point for this interworking connection.	column	ATM-TC-MIBAtmVpIdentifier	`.1.3.6.1.2.1.86.1.2.1.3`
frAtmIwfConnVci The VCI of the ATM PVC end point for this interworking connection.	column	ATM-TC-MIBAtmVcIdentifier	`.1.3.6.1.2.1.86.1.2.1.4`
frAtmIwfConnFrPort The index in the ifTable that identifies the frame relay port for this interworking connection.	column	IF-MIBInterfaceIndex	`.1.3.6.1.2.1.86.1.2.1.5`
frAtmIwfConnDlci The DLCI that identifies the frame relay PVC end point for this interworking connection.	column	Integer32	`.1.3.6.1.2.1.86.1.2.1.6`
frAtmIwfConnRowStatus The table row may be created with 'createAndWait(5)' or 'createAndGo(4)'. To activate a connection entry, a valid connection descriptor MUST be established in the frAtmIwfConnecti…	column	SNMPv2-TCRowStatus	`.1.3.6.1.2.1.86.1.2.1.7`
frAtmIwfConnAtm2FrOperStatus The current operational state of this interworking connection in the ATM to frame relay direction.	column	Enumeration	`.1.3.6.1.2.1.86.1.2.1.9`