snOspfVirtIfAreaID
FOUNDRY-SN-OSPF-GROUP-MIB ·
.1.3.6.1.4.1.1991.1.2.4.5.1.1.1
Object
column
AreaID
The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0
Context
- MIB
- FOUNDRY-SN-OSPF-GROUP-MIB
- OID
.1.3.6.1.4.1.1991.1.2.4.5.1.1.1- Type
- column
- Access
- readonly
- Status
- current
- Parent
- snOspfVirtIfEntry
- Table
- snOspfVirtIfTable
- Siblings
- 12
Syntax
AreaID
- Source
- AreaID
- Base type
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| snOspfVirtIfMd5AuthKeyId The md5 authentication key ID. If the snOspfVirtIfAuthType
is set to md5, the value of snOspfVirtIfMd5AuthKeyId must be
(1 to 255). This field identifies the algorithm and secret… | column | Integer32 | .1.3.6.1.4.1.1991.1.2.4.5.1.1.10 |
| snOspfVirtIfMd5AuthKey The MD5 Authentication Key. If the Area's Authorization
Type is md5, and the key length is shorter than 16 octets,
the agent will left adjust and zero fill to 16 octets.
… | column | OctetString | .1.3.6.1.4.1.1991.1.2.4.5.1.1.11 |
| snOspfVirtIfMd5ActivationWaitTime The md5 authentication key activation wait time is specified in second
and the maximum wait time is 14400 seconds (4 hours). | column | Integer32 | .1.3.6.1.4.1.1991.1.2.4.5.1.1.12 |
| snOspfVirtIfAreaIdFormat This object is used to specify whether
AreaId is represented as IP Address or
an Integer. The values
that can be written are:
integer(0).....as an integer.
ipAddress(1)...as IP A… | column | Enumeration | .1.3.6.1.4.1.1991.1.2.4.5.1.1.13 |
| snOspfVirtIfNeighbor The Router ID of the Virtual Neighbor. | column | RouterID | .1.3.6.1.4.1.1991.1.2.4.5.1.1.2 |
| snOspfVirtIfTransitDelay The estimated number of seconds it takes to transmit a
link- state update packet over this interface. | column | UpToMaxAge | .1.3.6.1.4.1.1991.1.2.4.5.1.1.3 |
| snOspfVirtIfRetransInterval The number of seconds between link-state advertisement
retransmissions, for adjacencies belonging to this
interface. This value is also used when retransmitting
database descript… | column | UpToMaxAge | .1.3.6.1.4.1.1991.1.2.4.5.1.1.4 |
| snOspfVirtIfHelloInterval The length of time, in seconds, between the Hello
packets that the router sends on the interface. This
value must be the same for the virtual neighbor. | column | HelloRange | .1.3.6.1.4.1.1991.1.2.4.5.1.1.5 |
| snOspfVirtIfRtrDeadInterval The number of seconds that a router's Hello packets
have not been seen before it's neighbors declare the
router down. This should be some multiple of the Hello
interval. This va… | column | PositiveInteger | .1.3.6.1.4.1.1991.1.2.4.5.1.1.6 |
| snOspfVirtIfAuthType The authentication type specified for an interface.
Additional authentication types may be assigned locally
on a per interface basis. | column | Integer32 | .1.3.6.1.4.1.1991.1.2.4.5.1.1.7 |
| snOspfVirtIfAuthKey If Authentication Type is simplePassword, the device
will left adjust and zero fill to 8 octets.
When read, snOspfVifAuthKey always returns a string of
length zero. | column | OctetString | .1.3.6.1.4.1.1991.1.2.4.5.1.1.8 |
| snOspfVirtIfRowStatus This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new r… | column | Enumeration | .1.3.6.1.4.1.1991.1.2.4.5.1.1.9 |