snOspfIfStatusRetransInterval
FOUNDRY-SN-OSPF-GROUP-MIB ·
.1.3.6.1.4.1.1991.1.2.4.12.1.1.9
Object
column
UpToMaxAge
The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets.
Context
- MIB
- FOUNDRY-SN-OSPF-GROUP-MIB
- OID
.1.3.6.1.4.1.1991.1.2.4.12.1.1.9- Type
- column
- Access
- readonly
- Status
- current
- Parent
- snOspfIfStatusEntry
- Table
- snOspfIfStatusTable
- Siblings
- 21
Syntax
UpToMaxAge
- Source
- UpToMaxAge
- Base type
Integer32
Values & Constraints
Type Constraints
range: 0..3600
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| snOspfIfStatusEntryIndex The table entry index of this Area. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.2.4.12.1.1.1 |
| snOspfIfStatusHelloInterval The length of time, in seconds, between the Hello
packets that the router sends on the interface. This
value must be the same for all routers attached to a
common network. | column | HelloRange | .1.3.6.1.4.1.1991.1.2.4.12.1.1.10 |
| snOspfIfStatusRtrDeadInterval The number of seconds that a router's Hello packets
have not been seen before it's neighbors declare the
router down. This should be some multiple of the Hello
interval. This va… | column | PositiveInteger | .1.3.6.1.4.1.1991.1.2.4.12.1.1.11 |
| snOspfIfStatusState The OSPF Interface State. | column | Enumeration | .1.3.6.1.4.1.1991.1.2.4.12.1.1.12 |
| snOspfIfStatusDesignatedRouter The IP Address of the Designated Router. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1991.1.2.4.12.1.1.13 |
| snOspfIfStatusBackupDesignatedRouter The IP Address of the Backup Designated Router. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1991.1.2.4.12.1.1.14 |
| snOspfIfStatusEvents The number of times this OSPF interface has changed
its state, or an error has occurred. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1991.1.2.4.12.1.1.15 |
| snOspfIfStatusAuthType The authentication type specified for an interface.
Additional authentication types may be assigned locally
on a per interface basis. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.2.4.12.1.1.16 |
| snOspfIfStatusAuthKey The Authentication Key. If the Area's Authorization
Type is simplePassword, and the key length is shorter
than 8 octets, the agent will left adjust and zero fill
to 8 octets.
… | column | OctetString | .1.3.6.1.4.1.1991.1.2.4.12.1.1.17 |
| snOspfIfStatusMetricValue The metric of using this type of service on
this interface. The default value of the TOS 0
Metric is 10^8 / ifSpeed. | column | Metric | .1.3.6.1.4.1.1991.1.2.4.12.1.1.18 |
| snOspfIfStatusMd5AuthKeyId The md5 authentication key ID. If the snOspfVirtIfAuthType
is set to md5, the value of snOspfIfMd5AuthKeyId must be
(1 to 255). This field identifies the algorithm and secret
ke… | column | Integer32 | .1.3.6.1.4.1.1991.1.2.4.12.1.1.19 |
| snOspfIfStatusPort The physical router port of this OSPF interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.2.4.12.1.1.2 |
| snOspfIfStatusMd5AuthKey The MD5 Authentication Key. If the Area's Authorization
Type is md5, and the key length is shorter than 16 octets,
the agent will left adjust and zero fill to 16 octets.
When re… | column | OctetString | .1.3.6.1.4.1.1991.1.2.4.12.1.1.20 |
| snOspfIfStatusMd5ActivationWaitTime The md5 authentication key activation wait time is specified in second
and the maximum wait time is 14400 seconds (4 hours). | column | Integer32 | .1.3.6.1.4.1.1991.1.2.4.12.1.1.21 |
| snOspfIfStatusAreaIdFormat This object is used to specify whether
AreaId is represented as IP Address or
an Integer. The values
that can be written are:
integer(0).....as an integer.
ipAddress(1)...as IP A… | column | Enumeration | .1.3.6.1.4.1.1991.1.2.4.12.1.1.22 |
| snOspfIfStatusIpAddress The IP address of this OSPF interface. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1991.1.2.4.12.1.1.3 |
| snOspfIfStatusAreaId A 32-bit integer uniquely identifying the area to
which the interface connects. Area ID 0.0.0.0 is used
for the OSPF backbone. | column | AreaID | .1.3.6.1.4.1.1991.1.2.4.12.1.1.4 |
| snOspfIfStatusType The OSPF interface type.
By way of a default, this field may be intuited from
the corresponding value of ifType. Broadcast LANs,
such as Ethernet and IEEE 802.5, t… | column | Enumeration | .1.3.6.1.4.1.1991.1.2.4.12.1.1.5 |
| snOspfIfStatusAdminStat The OSPF interface's administrative status. The value
'enabled' denotes that neighbor relationships may be
formed on the interface, and the interface will be
advertised as an int… | column | RtrStatus | .1.3.6.1.4.1.1991.1.2.4.12.1.1.6 |
| snOspfIfStatusRtrPriority The priority of this interface. Used in multi-access
networks, this field is used in the designated router
election algorithm. The value 0 signifies that the
router is not eligi… | column | DesignatedRouterPriority | .1.3.6.1.4.1.1991.1.2.4.12.1.1.7 |
| snOspfIfStatusTransitDelay The estimated number of seconds it takes to transmit a
link- state update packet over this interface. | column | UpToMaxAge | .1.3.6.1.4.1.1991.1.2.4.12.1.1.8 |