snOspfExternLSACksumSum

FOUNDRY-SN-OSPF-GROUP-MIB · .1.3.6.1.4.1.1991.1.2.4.1.7
MIB view Table view

Object

scalar SNMPv2-SMIInteger32 
The 32-bit unsigned sum of the LS checksums of the
external link-state advertisements contained in the
link-state database.  This sum can be used to determine
if there has been a change in a router's link state
database, and to compare the link-state database of two
routers.

Context

MIB
FOUNDRY-SN-OSPF-GROUP-MIB
OID
.1.3.6.1.4.1.1991.1.2.4.1.7
Type
scalar
Access
readonly
Status
current
Parent
snOspfGen
Siblings
17

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
snOspfRouterId
A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the router's …
scalarRouterID.1.3.6.1.4.1.1991.1.2.4.1.1
snOspfOspfRedisMetricType
type1: For External Type 1 (comparable value) the intra-area and inter-area routes, it is an OSPF metric plus the External Metric. type2: For external Type 2 (non-comparable val…
scalarEnumeration.1.3.6.1.4.1.1991.1.2.4.1.10
snOspfExtLsdbLimit
The maximum number of non-default AS- external-LSAs entries that can be stored in the link-state database. When the number of non-default AS-external-LSAs in …
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.1991.1.2.4.1.11
snOspfExitOverflowInterval
The number of seconds that, after entering OverflowState, a router will attempt to leave OverflowState. This allows the router to again originate non-default AS-external-…
scalarInteger32.1.3.6.1.4.1.1991.1.2.4.1.12
snOspfRfc1583Compatibility
This allows the ospf routing either compatible with RFC1583 or RFC2178. enabled(1)........activate RFC1583 compatibility rather than RFC2178 disabled(0).......disable RFC1583 comp…
scalarEnumeration.1.3.6.1.4.1.1991.1.2.4.1.13
snOspfRouterIdFormat
This object is used to specify whether RouterId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP…
scalarEnumeration.1.3.6.1.4.1.1991.1.2.4.1.14
snOspfDistance obsolete
OSPF Adminitrative distance. 0 if distance is not set.
scalarInteger32.1.3.6.1.4.1.1991.1.2.4.1.15
snOspfDistanceIntra
OSPF Adminitrative distance - Intra Area.
scalarInteger32.1.3.6.1.4.1.1991.1.2.4.1.16
snOspfDistanceInter
OSPF Adminitrative distance - Inter Area.
scalarInteger32.1.3.6.1.4.1.1991.1.2.4.1.17
snOspfDistanceExternal
OSPF Adminitrative distance - External.
scalarInteger32.1.3.6.1.4.1.1991.1.2.4.1.18
snOspfAdminStat
The administrative status of OSPF in the router. The value 'enabled' denotes that the OSPF Process is active on at least one interface; 'disabled' disables it on all interfaces.
scalarRtrStatus.1.3.6.1.4.1.1991.1.2.4.1.2
snOspfASBdrRtrStatus
A flag to note whether this router is an Autonomous System border router.
scalarTruthVal.1.3.6.1.4.1.1991.1.2.4.1.3
snOspfRedisMode
The Redistribution status of OSPF in the router. The value 'enabled' denotes that the OSPF Redistribution is active; 'disabled' disables it on the router.
scalarRtrStatus.1.3.6.1.4.1.1991.1.2.4.1.4
snOspfDefaultOspfMetricValue
The metric of using a default OSPF Metric value on this route.
scalarInteger32.1.3.6.1.4.1.1991.1.2.4.1.5
snOspfExternLSACount
The number of external (LS type 5) link-state advertisements in the link-state database.
scalarSNMPv2-SMIGauge32.1.3.6.1.4.1.1991.1.2.4.1.6
snOspfOriginateNewLSAs
The number of new link-state advertisements that have been originated. This number is incremented each time the router originates a new LSA.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.1991.1.2.4.1.8
snOspfRxNewLSAs
The number of link-state advertisements received determined to be new instantiations. This number does not include newer instantiations of self-originated link-state advertisemen…
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.1991.1.2.4.1.9