snOspfDistanceExternal
FOUNDRY-SN-OSPF-GROUP-MIB ·
.1.3.6.1.4.1.1991.1.2.4.1.18
Object
scalar
r/w
Integer32
OSPF Adminitrative distance - External.
Context
- MIB
- FOUNDRY-SN-OSPF-GROUP-MIB
- OID
.1.3.6.1.4.1.1991.1.2.4.1.18- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- snOspfGen
- Siblings
- 17
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| snOspfRouterId A 32-bit integer uniquely identifying the router in
the Autonomous System.
By convention, to ensure uniqueness, this should
default to the value of one of the router's … | scalar | RouterID | .1.3.6.1.4.1.1991.1.2.4.1.1 |
| snOspfOspfRedisMetricType type1: For External Type 1 (comparable value) the
intra-area and inter-area routes,
it is an OSPF metric plus the External Metric.
type2: For external Type 2 (non-comparable val… | scalar | Enumeration | .1.3.6.1.4.1.1991.1.2.4.1.10 |
| snOspfExtLsdbLimit The maximum number of non-default AS-
external-LSAs entries that can be stored in the
link-state database.
When the number of non-default AS-external-LSAs
in … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.2.4.1.11 |
| snOspfExitOverflowInterval The number of seconds that, after entering
OverflowState, a router will attempt to leave
OverflowState. This allows the router to again
originate non-default AS-external-… | scalar | Integer32 | .1.3.6.1.4.1.1991.1.2.4.1.12 |
| snOspfRfc1583Compatibility This allows the ospf routing either compatible with
RFC1583 or RFC2178.
enabled(1)........activate RFC1583 compatibility rather than RFC2178
disabled(0).......disable RFC1583 comp… | scalar | Enumeration | .1.3.6.1.4.1.1991.1.2.4.1.13 |
| snOspfRouterIdFormat This object is used to specify whether
RouterId is represented as IP Address or
an Integer. The values
that can be written are:
integer(0).....as an integer.
ipAddress(1)...as IP… | scalar | Enumeration | .1.3.6.1.4.1.1991.1.2.4.1.14 |
| snOspfDistance obsolete OSPF Adminitrative distance. 0 if distance is not set. | scalar | Integer32 | .1.3.6.1.4.1.1991.1.2.4.1.15 |
| snOspfDistanceIntra OSPF Adminitrative distance - Intra Area. | scalar | Integer32 | .1.3.6.1.4.1.1991.1.2.4.1.16 |
| snOspfDistanceInter OSPF Adminitrative distance - Inter Area. | scalar | Integer32 | .1.3.6.1.4.1.1991.1.2.4.1.17 |
| snOspfAdminStat The administrative status of OSPF in the router. The
value 'enabled' denotes that the OSPF Process is active
on at least one interface; 'disabled' disables it on
all interfaces. | scalar | RtrStatus | .1.3.6.1.4.1.1991.1.2.4.1.2 |
| snOspfASBdrRtrStatus A flag to note whether this router is an Autonomous
System border router. | scalar | TruthVal | .1.3.6.1.4.1.1991.1.2.4.1.3 |
| snOspfRedisMode The Redistribution status of OSPF in the router. The
value 'enabled' denotes that the OSPF Redistribution is
active; 'disabled' disables it on the router. | scalar | RtrStatus | .1.3.6.1.4.1.1991.1.2.4.1.4 |
| snOspfDefaultOspfMetricValue The metric of using a default OSPF Metric value on this route. | scalar | Integer32 | .1.3.6.1.4.1.1991.1.2.4.1.5 |
| snOspfExternLSACount The number of external (LS type 5) link-state
advertisements in the link-state database. | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.1991.1.2.4.1.6 |
| snOspfExternLSACksumSum The 32-bit unsigned sum of the LS checksums of the
external link-state advertisements contained in the
link-state database. This sum can be used to determine
if there has been a … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.2.4.1.7 |
| snOspfOriginateNewLSAs The number of new link-state advertisements that have
been originated. This number is incremented each time
the router originates a new LSA. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1991.1.2.4.1.8 |
| snOspfRxNewLSAs The number of link-state advertisements received
determined to be new instantiations. This number does
not include newer instantiations of self-originated
link-state advertisemen… | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1991.1.2.4.1.9 |